From patchwork Mon Apr 30 14:12:33 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lorenzo Bianconi X-Patchwork-Id: 10371869 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 44FAD6038F for ; Mon, 30 Apr 2018 14:13:24 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 31806200E7 for ; Mon, 30 Apr 2018 14:13:24 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 255FB28798; Mon, 30 Apr 2018 14:13:24 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00, MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 0D445200E7 for ; Mon, 30 Apr 2018 14:13:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754324AbeD3ONT (ORCPT ); Mon, 30 Apr 2018 10:13:19 -0400 Received: from mail-wr0-f195.google.com ([209.85.128.195]:33483 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754297AbeD3ONR (ORCPT ); Mon, 30 Apr 2018 10:13:17 -0400 Received: by mail-wr0-f195.google.com with SMTP id o4-v6so8189183wrm.0 for ; Mon, 30 Apr 2018 07:13:16 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=AP9m4dOiDVaTAyjJJtX5DHnVMP4mBef0iw53IWVo1X0=; b=tPmQCaw7L04OMSOvX38IrtdfSRFPhmhAzYRnoOGL5fBhd10JRkfWuFD/ISNCehREGD HGlgUtk74+97jkfhdZ/hU7wEfRXJ3YS6ut7wxPoL+lOprysyG52elGSbW67WCkcpcr1A N/KZQJLa7koLBnrQb2uHhLZ7VwM0ldCYRQ6QBMRbtgpZXgxgpd1H2AZEs0RfHIiMTRZp ZZsu0AuAoHpND+/AqveCnTe8bnMIpP1ljihzNnwim4VI+XY5YMxcz1g7vT+lS+YnFk5A blq1GD27XDqWMV8QFe2WM6q3CRGwV/4oJJKIVtk5hpxTVC5WUK1w53GVKjD9OOqL0t+P XCCQ== X-Gm-Message-State: ALQs6tBxWznl8b5oU6P5xv5v/9i9hSpK6uiAs4tw9UFu6nhe5tqw0iWE GSJksgGuN2HSiuwzrwi7c3DzrQ== X-Google-Smtp-Source: AB8JxZojTZBaGCWb6PFOtABDhmJpsY9YTryo7GUgi57xrVFzIjsK76YYdL6SJgzlqRqZGPuMhsfX/w== X-Received: by 2002:adf:b807:: with SMTP id h7-v6mr8688003wrf.113.1525097594390; Mon, 30 Apr 2018 07:13:14 -0700 (PDT) Received: from localhost.localdomain.com (nat-pool-mxp-t.redhat.com. [149.6.153.186]) by smtp.gmail.com with ESMTPSA id f83sm10207105wmh.32.2018.04.30.07.13.13 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Mon, 30 Apr 2018 07:13:13 -0700 (PDT) From: Lorenzo Bianconi To: nbd@nbd.name Cc: linux-wireless@vger.kernel.org, sgruszka@redhat.com Subject: [RFC 18/18] mt76: add driver code for MT76x2u based devices Date: Mon, 30 Apr 2018 16:12:33 +0200 Message-Id: <156ffdbdccf4e3a7f4773934e4e799d171dea066.1525096206.git.lorenzo.bianconi@redhat.com> X-Mailer: git-send-email 2.14.3 In-Reply-To: References: Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP MT76x2u is a 2x2 USB 802.11ac chipset by MediaTek. This driver currently support station mode. Frequency calibration is currently not supported Signed-off-by: Lorenzo Bianconi --- drivers/net/wireless/mediatek/mt76/Kconfig | 9 + drivers/net/wireless/mediatek/mt76/Makefile | 5 + drivers/net/wireless/mediatek/mt76/mt76x2.h | 5 + drivers/net/wireless/mediatek/mt76/mt76x2_regs.h | 35 ++ drivers/net/wireless/mediatek/mt76/mt76x2_usb.c | 85 +++ drivers/net/wireless/mediatek/mt76/mt76x2u.h | 93 ++++ drivers/net/wireless/mediatek/mt76/mt76x2u_core.c | 194 +++++++ drivers/net/wireless/mediatek/mt76/mt76x2u_init.c | 302 ++++++++++ drivers/net/wireless/mediatek/mt76/mt76x2u_mac.c | 237 ++++++++ drivers/net/wireless/mediatek/mt76/mt76x2u_main.c | 161 ++++++ drivers/net/wireless/mediatek/mt76/mt76x2u_mcu.c | 648 ++++++++++++++++++++++ drivers/net/wireless/mediatek/mt76/mt76x2u_phy.c | 264 +++++++++ 12 files changed, 2038 insertions(+) create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2_usb.c create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2u.h create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2u_core.c create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2u_init.c create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2u_mac.c create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2u_main.c create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2u_mcu.c create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2u_phy.c diff --git a/drivers/net/wireless/mediatek/mt76/Kconfig b/drivers/net/wireless/mediatek/mt76/Kconfig index 339da3573b9d..4e5c4b5cedd3 100644 --- a/drivers/net/wireless/mediatek/mt76/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/Kconfig @@ -12,3 +12,12 @@ config MT76x2E depends on PCI ---help--- This adds support for MT7612/MT7602/MT7662-based wireless PCIe devices. + +config MT76x2U + tristate "MediaTek MT76x2U (USB) support" + select MT76_CORE + select MT76x2_COMMON + depends on MAC80211 + depends on USB + help + This adds support for MT7612U-based wireless USB dongles. diff --git a/drivers/net/wireless/mediatek/mt76/Makefile b/drivers/net/wireless/mediatek/mt76/Makefile index 4f7f6021d79c..3170e4ed2f53 100644 --- a/drivers/net/wireless/mediatek/mt76/Makefile +++ b/drivers/net/wireless/mediatek/mt76/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_MT76_CORE) += mt76.o obj-$(CONFIG_MT76x2_COMMON) += mt76x2-common.o obj-$(CONFIG_MT76x2E) += mt76x2e.o +obj-$(CONFIG_MT76x2U) += mt76x2u.o mt76-y := \ mmio.o util.o trace.o dma.o mac80211.o debugfs.o eeprom.o \ @@ -19,4 +20,8 @@ mt76x2e-y := \ mt76x2_core.o mt76x2_mac.o mt76x2_mcu.o mt76x2_phy.o \ mt76x2_dfs.o mt76x2_trace.o +mt76x2u-y := \ + mt76x2_usb.o mt76x2u_init.o mt76x2u_main.o mt76x2u_mac.o \ + mt76x2u_mcu.o mt76x2u_phy.o mt76x2u_core.o + CFLAGS_mt76x2_trace.o := -I$(src) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2.h b/drivers/net/wireless/mediatek/mt76/mt76x2.h index 4436b2639a4a..b1e7b991b0c1 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2.h +++ b/drivers/net/wireless/mediatek/mt76/mt76x2.h @@ -32,6 +32,9 @@ #define MT7662_ROM_PATCH "mt7662_rom_patch.bin" #define MT7662_EEPROM_SIZE 512 +#define MT7662U_FIRMWARE "mt7662u.bin" +#define MT7662U_ROM_PATCH "mt7662u_rom_patch.bin" + #define MT76x2_RX_RING_SIZE 256 #define MT_RX_HEADROOM 32 @@ -49,6 +52,7 @@ struct mt76x2_mcu { struct completion resp_cmpl; struct sk_buff_head res_q; + struct mt76_usb_buf res_u; u32 msg_seq; }; @@ -102,6 +106,7 @@ struct mt76x2_dev { struct tasklet_struct tx_tasklet; struct tasklet_struct pre_tbtt_tasklet; + struct delayed_work stat_work; struct delayed_work cal_work; struct delayed_work mac_work; diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_regs.h b/drivers/net/wireless/mediatek/mt76/mt76x2_regs.h index b9c334d9e5b8..b71e62695207 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2_regs.h +++ b/drivers/net/wireless/mediatek/mt76/mt76x2_regs.h @@ -75,6 +75,21 @@ #define MT_XO_CTRL7 0x011c +#define MT_USB_U3DMA_CFG 0x9018 +#define MT_USB_DMA_CFG_RX_BULK_AGG_TOUT GENMASK(7, 0) +#define MT_USB_DMA_CFG_RX_BULK_AGG_LMT GENMASK(15, 8) +#define MT_USB_DMA_CFG_UDMA_TX_WL_DROP BIT(16) +#define MT_USB_DMA_CFG_WAKE_UP_EN BIT(17) +#define MT_USB_DMA_CFG_RX_DROP_OR_PAD BIT(18) +#define MT_USB_DMA_CFG_TX_CLR BIT(19) +#define MT_USB_DMA_CFG_TXOP_HALT BIT(20) +#define MT_USB_DMA_CFG_RX_BULK_AGG_EN BIT(21) +#define MT_USB_DMA_CFG_RX_BULK_EN BIT(22) +#define MT_USB_DMA_CFG_TX_BULK_EN BIT(23) +#define MT_USB_DMA_CFG_EP_OUT_VALID GENMASK(29, 24) +#define MT_USB_DMA_CFG_RX_BUSY BIT(30) +#define MT_USB_DMA_CFG_TX_BUSY BIT(31) + #define MT_WLAN_MTC_CTRL 0x10148 #define MT_WLAN_MTC_CTRL_MTCMOS_PWR_UP BIT(0) #define MT_WLAN_MTC_CTRL_PWR_ACK BIT(12) @@ -141,6 +156,9 @@ #define MT_WMM_TXOP_SHIFT(_n) ((_n & 1) * 16) #define MT_WMM_TXOP_MASK GENMASK(15, 0) +#define MT_FCE_DMA_ADDR 0x0230 +#define MT_FCE_DMA_LEN 0x0234 + #define MT_TSO_CTRL 0x0250 #define MT_HEADER_TRANS_CTRL_REG 0x0260 @@ -150,6 +168,9 @@ #define MT_TX_HW_QUEUE_MCU 8 #define MT_TX_HW_QUEUE_MGMT 9 +#define MT_US_CYC_CFG 0x02a4 +#define MT_US_CYC_CNT GENMASK(7, 0) + #define MT_PBF_SYS_CTRL 0x0400 #define MT_PBF_SYS_CTRL_MCU_RESET BIT(0) #define MT_PBF_SYS_CTRL_DMA_RESET BIT(1) @@ -202,6 +223,13 @@ #define MT_FCE_WLAN_FLOW_CONTROL1 0x0824 +#define MT_TX_CPU_FROM_FCE_BASE_PTR 0x09a0 +#define MT_TX_CPU_FROM_FCE_MAX_COUNT 0x09a4 +#define MT_FCE_PDMA_GLOBAL_CONF 0x09c4 +#define MT_FCE_SKIP_FS 0x0a6c + +#define MT_TX_CPU_FROM_FCE_CPU_DESC_IDX 0x09a8 + #define MT_PAUSE_ENABLE_CONTROL1 0x0a38 #define MT_MAC_CSR0 0x1000 @@ -214,6 +242,7 @@ #define MT_MAC_ADDR_DW0 0x1008 #define MT_MAC_ADDR_DW1 0x100c +#define MT_MAC_ADDR_DW1_U2ME_MASK GENMASK(23, 16) #define MT_MAC_BSSID_DW0 0x1010 #define MT_MAC_BSSID_DW1 0x1014 @@ -351,6 +380,7 @@ #define MT_TX_TIMEOUT_CFG_ACKTO GENMASK(15, 8) #define MT_TX_RETRY_CFG 0x134c +#define MT_TX_LINK_CFG 0x1350 #define MT_VHT_HT_FBK_CFG1 0x1358 #define MT_PROT_CFG_RATE GENMASK(15, 0) @@ -425,6 +455,7 @@ #define MT_RX_FILTR_CFG_BAR BIT(15) #define MT_RX_FILTR_CFG_CTRL_RSV BIT(16) +#define MT_AUTO_RSP_CFG 0x1404 #define MT_LEGACY_BASIC_RATE 0x1408 #define MT_HT_BASIC_RATE 0x140c @@ -460,6 +491,10 @@ #define MT_RX_STAT_2_DUP_ERRORS GENMASK(15, 0) #define MT_RX_STAT_2_OVERFLOW_ERRORS GENMASK(31, 16) +#define MT_TX_STA_0 0x170c +#define MT_TX_STA_1 0x1710 +#define MT_TX_STA_2 0x1714 + #define MT_TX_STAT_FIFO 0x1718 #define MT_TX_STAT_FIFO_VALID BIT(0) #define MT_TX_STAT_FIFO_SUCCESS BIT(5) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2_usb.c new file mode 100644 index 000000000000..54cc74c6f1ca --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2_usb.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include + +#include "mt76x2u.h" + +static const struct usb_device_id mt76x2u_device_table[] = { + { USB_DEVICE(0x0846, 0x9053) }, /* Netgear A6210 */ + { }, +}; + +static int mt76x2u_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct mt76x2_dev *dev; + int err; + + dev = mt76x2u_alloc_device(&intf->dev); + if (!dev) + return -ENOMEM; + + udev = usb_get_dev(udev); + usb_reset_device(udev); + + err = mt76_usb_init(&dev->mt76, intf); + if (err < 0) + goto err; + + dev->mt76.rev = mt76_rr(dev, MT_ASIC_VERSION); + dev_info(dev->mt76.dev, "ASIC revision: %08x\n", dev->mt76.rev); + + err = mt76x2u_register_device(dev); + if (err < 0) + goto err; + + return 0; + +err: + ieee80211_free_hw(mt76_hw(dev)); + usb_set_intfdata(intf, NULL); + usb_put_dev(udev); + + return err; +} + +static void mt76x2u_disconnect(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct mt76x2_dev *dev = usb_get_intfdata(intf); + + mt76x2u_cleanup(dev); + + ieee80211_free_hw(mt76_hw(dev)); + usb_set_intfdata(intf, NULL); + usb_put_dev(udev); +} + +MODULE_DEVICE_TABLE(usb, mt76x2u_device_table); +MODULE_FIRMWARE(MT7662U_FIRMWARE); +MODULE_FIRMWARE(MT7662U_ROM_PATCH); +MODULE_LICENSE("Dual BSD/GPL"); + +static struct usb_driver mt76x2u_driver = { + .name = KBUILD_MODNAME, + .id_table = mt76x2u_device_table, + .probe = mt76x2u_probe, + .disconnect = mt76x2u_disconnect, +}; +module_usb_driver(mt76x2u_driver); diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2u.h b/drivers/net/wireless/mediatek/mt76/mt76x2u.h new file mode 100644 index 000000000000..fcf3978b282b --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2u.h @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef __MT76x2U_H +#define __MT76x2U_H + +#include + +#include "mt76x2.h" +#include "mt76x2_dma.h" +#include "mt76x2_mcu.h" + +#define MT7612U_EEPROM_SIZE 512 + +#define MT_USB_AGGR_SIZE_LIMIT 21 /* 1024B unit */ +#define MT_USB_AGGR_TIMEOUT 0x80 /* 33ns unit */ + +extern const struct ieee80211_ops mt76x2u_ops; + +struct mt76x2_dev *mt76x2u_alloc_device(struct device *pdev); +int mt76x2u_register_device(struct mt76x2_dev *dev); +void mt76x2u_cleanup(struct mt76x2_dev *dev); +void mt76x2u_stop_hw(struct mt76x2_dev *dev); + +void mt76x2u_mac_setaddr(struct mt76x2_dev *dev, u8 *addr); +int mt76x2u_mac_reset(struct mt76x2_dev *dev); +void mt76x2u_mac_resume(struct mt76x2_dev *dev); +int mt76x2u_mac_start(struct mt76x2_dev *dev); +int mt76x2u_mac_stop(struct mt76x2_dev *dev); + +int mt76x2u_phy_set_channel(struct mt76x2_dev *dev, + struct cfg80211_chan_def *chandef); +void mt76x2u_phy_calibrate(struct work_struct *work); +void mt76x2u_phy_channel_calibrate(struct mt76x2_dev *dev); +void mt76x2u_phy_set_txdac(struct mt76x2_dev *dev); +void mt76x2u_phy_set_rxpath(struct mt76x2_dev *dev); + +int mt76x2u_mcu_set_channel(struct mt76x2_dev *dev, u8 channel, u8 bw, + u8 bw_index, bool scan); +int mt76x2u_mcu_calibrate(struct mt76x2_dev *dev, enum mcu_calibration type, + u32 val); +int mt76x2u_mcu_tssi_comp(struct mt76x2_dev *dev, + struct mt76x2_tssi_comp *tssi_data); +int mt76x2u_mcu_init_gain(struct mt76x2_dev *dev, u8 channel, u32 gain, + bool force); +int mt76x2u_mcu_set_radio_state(struct mt76x2_dev *dev, bool val); +int mt76x2u_mcu_load_cr(struct mt76x2_dev *dev, u8 type, + u8 temp_level, u8 channel); +int mt76x2u_mcu_init(struct mt76x2_dev *dev); +int mt76x2u_mcu_fw_init(struct mt76x2_dev *dev); +void mt76x2u_mcu_deinit(struct mt76x2_dev *dev); + +int mt76x2u_dma_init(struct mt76x2_dev *dev); +void mt76x2u_dma_cleanup(struct mt76x2_dev *dev); +void mt76x2u_tx_status_data(struct work_struct *work); +int mt76x2u_tx_prepare_skb(struct mt76_dev *mdev, void *data, + struct sk_buff *skb, struct mt76_queue *q, + struct mt76_wcid *wcid, struct ieee80211_sta *sta, + u32 *tx_info); +void mt76x2u_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue *q, + struct mt76_queue_entry *e, bool flush); + +static inline int mt76x2u_dma_skb_info(struct sk_buff *skb, + enum dma_msg_port port, + u32 flags) +{ + /* Buffer layout: + * | 4B | xfer len | pad | 4B | + * | TXINFO | pkt/cmd | zero pad to 4B | zero | + * + * length field of TXINFO should be set to 'xfer len'. + */ + u32 info = FIELD_PREP(MT_TXD_INFO_LEN, round_up(skb->len, 4)) | + FIELD_PREP(MT_TXD_INFO_DPORT, port) | flags; + + put_unaligned_le32(info, skb_push(skb, sizeof(info))); + return skb_put_padto(skb, round_up(skb->len, 4) + 4); +} + +#endif /* __MT76x2U_H */ diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2u_core.c b/drivers/net/wireless/mediatek/mt76/mt76x2u_core.c new file mode 100644 index 000000000000..f552641b95ff --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2u_core.c @@ -0,0 +1,194 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "mt76x2u.h" +#include "dma.h" + +static void mt76x2u_enable_dma(struct mt76x2_dev *dev) +{ + u32 val = mt76_rr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG)); + + val |= FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, + MT_USB_AGGR_TIMEOUT) | + FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_LMT, + MT_USB_AGGR_SIZE_LIMIT) | + MT_USB_DMA_CFG_RX_DROP_OR_PAD | + MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN; + if (dev->mt76.usb.in_max_packet >= 512) + val |= MT_USB_DMA_CFG_RX_BULK_AGG_EN; + else + val &= ~MT_USB_DMA_CFG_RX_BULK_AGG_EN; + mt76_wr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG), val); +} + +static void mt76x2u_remove_dma_hdr(struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int hdr_len, len; + + len = (unsigned long)info->status.status_driver_data[0]; + skb_pull(skb, sizeof(struct mt76x2_txwi) + MT_DMA_HDR_LEN); + hdr_len = ieee80211_get_hdrlen_from_skb(skb); + if (hdr_len % 4) { + memmove(skb->data + 2, skb->data, hdr_len); + skb_pull(skb, 2); + } +} + +static int +mt76x2u_check_skb_rooms(struct mt76x2_dev *dev, struct sk_buff *skb) +{ + int hdr_len = ieee80211_get_hdrlen_from_skb(skb); + u32 need_head; + + need_head = sizeof(struct mt76x2_txwi) + MT_DMA_HDR_LEN; + if (hdr_len % 4) + need_head += 2; + return skb_cow(skb, need_head); +} + +static int +mt76x2u_set_txinfo(struct mt76x2_dev *dev, struct sk_buff *skb, + struct mt76_wcid *wcid, u8 ep) +{ + enum mt76x2_qsel qsel = ep == 5 ? MT_QSEL_MGMT : MT_QSEL_EDCA; + u32 flags = FIELD_PREP(MT_TXD_INFO_QSEL, qsel) | + MT_TXD_INFO_80211; + + if (!wcid || wcid->hw_key_idx == 0xff || wcid->sw_iv) + flags |= MT_TXD_INFO_WIV; + + return mt76x2u_dma_skb_info(skb, WLAN_PORT, flags); +} + +static void +mt76x2u_tx_status(struct mt76x2_dev *dev, struct mt76_queue *q) +{ + struct mt76_usb_buf *buf; + struct sk_buff *skb; + + spin_lock_bh(&q->lock); + while (true) { + buf = &q->entry[q->head].ubuf; + if (!buf->done || q->head == q->tail) + break; + + skb = q->entry[q->head].skb; + mt76x2u_remove_dma_hdr(skb); + mt76x2_tx_complete(dev, skb); + if (q->entry[q->head].schedule) { + q->entry[q->head].schedule = false; + q->swq_queued--; + } + + q->head = (q->head + 1) % q->ndesc; + if (--q->queued == q->ndesc - 8) + ieee80211_wake_queue(mt76_hw(dev), + skb_get_queue_mapping(skb)); + } + mt76_txq_schedule(&dev->mt76, q); + spin_unlock_bh(&q->lock); +} + +void mt76x2u_tx_status_data(struct work_struct *work) +{ + struct mt76x2_tx_status stat; + struct mt76x2_dev *dev; + u8 update = 1; + u16 count = 0; + + dev = container_of(work, struct mt76x2_dev, stat_work.work); + + while (!test_bit(MT76_REMOVED, &dev->mt76.state)) { + stat = mt76x2_mac_load_tx_status(dev); + if (!stat.valid) + break; + + mt76x2_send_tx_status(dev, &stat, &update); + count++; + } + + if (count || test_and_clear_bit(MT76_PENDING_STATS, &dev->mt76.state)) + ieee80211_queue_delayed_work(mt76_hw(dev), &dev->stat_work, + msecs_to_jiffies(10)); + else + clear_bit(MT76_READING_STATS, &dev->mt76.state); +} + +int mt76x2u_tx_prepare_skb(struct mt76_dev *mdev, void *data, + struct sk_buff *skb, struct mt76_queue *q, + struct mt76_wcid *wcid, struct ieee80211_sta *sta, + u32 *tx_info) +{ + struct mt76x2_dev *dev = container_of(mdev, struct mt76x2_dev, mt76); + struct mt76x2_txwi *txwi; + int err, len = skb->len; + + err = mt76x2u_check_skb_rooms(dev, skb); + if (err < 0) + return -ENOMEM; + + mt76x2_insert_hdr_pad(skb); + + txwi = skb_push(skb, sizeof(struct mt76x2_txwi)); + mt76x2_mac_write_txwi(dev, txwi, skb, wcid, sta, len); + + return mt76x2u_set_txinfo(dev, skb, wcid, q2ep(q->hw_idx)); +} + +void mt76x2u_tx_complete_skb(struct mt76_dev *mdev, struct mt76_queue *q, + struct mt76_queue_entry *e, bool flush) +{ + struct mt76x2_dev *dev = container_of(mdev, struct mt76x2_dev, mt76); + int i; + + for (i = 0; i < IEEE80211_NUM_ACS; i++) + mt76x2u_tx_status(dev, &mdev->q_tx[i]); + + if (!test_and_set_bit(MT76_READING_STATS, &dev->mt76.state)) + ieee80211_queue_delayed_work(mt76_hw(dev), &dev->stat_work, + msecs_to_jiffies(10)); +} + +void mt76x2u_dma_cleanup(struct mt76x2_dev *dev) +{ + tasklet_disable(&dev->mt76.usb.rx_tasklet); + tasklet_disable(&dev->mt76.usb.tx_tasklet); + + mt76_usb_stop_rx(&dev->mt76); + mt76_usb_stop_tx(&dev->mt76); + + mt76_usb_free_rx(&dev->mt76); + mt76_usb_free_tx(&dev->mt76); +} + +int mt76x2u_dma_init(struct mt76x2_dev *dev) +{ + int err; + + mt76x2u_enable_dma(dev); + + err = mt76_usb_alloc_rx(&dev->mt76); + if (err < 0) + goto err; + + return mt76_usb_alloc_tx(&dev->mt76); +err: + mt76x2u_dma_cleanup(dev); + return err; +} + diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2u_init.c b/drivers/net/wireless/mediatek/mt76/mt76x2u_init.c new file mode 100644 index 000000000000..e541ca1d5fad --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2u_init.c @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include + +#include "mt76x2u.h" +#include "mt76x2_eeprom.h" + +static void mt76x2u_power_on_rf_patch(struct mt76x2_dev *dev) +{ + mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), BIT(0) | BIT(16)); + udelay(1); + + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x1c), 0xff); + mt76_set(dev, MT_VEND_ADDR(CFG, 0x1c), 0x30); + + mt76_wr(dev, MT_VEND_ADDR(CFG, 0x14), 0x484f); + udelay(1); + + mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), BIT(17)); + usleep_range(150, 200); + + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x130), BIT(16)); + usleep_range(50, 100); + + mt76_set(dev, MT_VEND_ADDR(CFG, 0x14c), BIT(19) | BIT(20)); +} + +static void mt76x2u_power_on_rf(struct mt76x2_dev *dev, int unit) +{ + int shift = unit ? 8 : 0; + u32 val = (BIT(1) | BIT(3) | BIT(4) | BIT(5)) << shift; + + /* Enable RF BG */ + mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), BIT(0) << shift); + usleep_range(10, 20); + + /* Enable RFDIG LDO/AFE/ABB/ADDA */ + mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), val); + usleep_range(10, 20); + + /* Switch RFDIG power to internal LDO */ + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x130), BIT(2) << shift); + usleep_range(10, 20); + + mt76x2u_power_on_rf_patch(dev); + + mt76_set(dev, 0x530, 0xf); +} + +static void mt76x2u_power_on(struct mt76x2_dev *dev) +{ + u32 val; + + /* Turn on WL MTCMOS */ + mt76_set(dev, MT_VEND_ADDR(CFG, 0x148), + MT_WLAN_MTC_CTRL_MTCMOS_PWR_UP); + + val = MT_WLAN_MTC_CTRL_STATE_UP | + MT_WLAN_MTC_CTRL_PWR_ACK | + MT_WLAN_MTC_CTRL_PWR_ACK_S; + + mt76_poll(dev, MT_VEND_ADDR(CFG, 0x148), val, val, 1000); + + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x148), 0x7f << 16); + usleep_range(10, 20); + + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x148), 0xf << 24); + usleep_range(10, 20); + + mt76_set(dev, MT_VEND_ADDR(CFG, 0x148), 0xf << 24); + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x148), 0xfff); + + /* Turn on AD/DA power down */ + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x1204), BIT(3)); + + /* WLAN function enable */ + mt76_set(dev, MT_VEND_ADDR(CFG, 0x80), BIT(0)); + + /* Release BBP software reset */ + mt76_clear(dev, MT_VEND_ADDR(CFG, 0x64), BIT(18)); + + mt76x2u_power_on_rf(dev, 0); + mt76x2u_power_on_rf(dev, 1); +} + +static int mt76x2u_init_eeprom(struct mt76x2_dev *dev) +{ + u32 val, i; + + dev->mt76.eeprom.data = devm_kzalloc(dev->mt76.dev, + MT7612U_EEPROM_SIZE, + GFP_KERNEL); + dev->mt76.eeprom.size = MT7612U_EEPROM_SIZE; + if (!dev->mt76.eeprom.data) + return -ENOMEM; + + for (i = 0; i + 4 <= MT7612U_EEPROM_SIZE; i += 4) { + val = mt76_rr(dev, MT_VEND_ADDR(EEPROM, i)); + put_unaligned_le32(val, dev->mt76.eeprom.data + i); + } + + mt76x2_eeprom_parse_hw_cap(dev); + return 0; +} + +struct mt76x2_dev *mt76x2u_alloc_device(struct device *pdev) +{ + static const struct mt76_driver_ops drv_ops = { + .tx_prepare_skb = mt76x2u_tx_prepare_skb, + .tx_complete_skb = mt76x2u_tx_complete_skb, + .rx_skb = mt76x2_queue_rx_skb, + }; + struct ieee80211_hw *hw; + struct mt76x2_dev *dev; + + hw = ieee80211_alloc_hw(sizeof(*dev), &mt76x2u_ops); + if (!hw) + return NULL; + + dev = hw->priv; + dev->mt76.dev = pdev; + dev->mt76.hw = hw; + dev->mt76.drv = &drv_ops; + mutex_init(&dev->mutex); + spin_lock_init(&dev->mt76.rx_lock); + + return dev; +} + +static void mt76x2u_init_beacon_offsets(struct mt76x2_dev *dev) +{ + mt76_wr(dev, MT_BCN_OFFSET(0), 0x18100800); + mt76_wr(dev, MT_BCN_OFFSET(1), 0x38302820); + mt76_wr(dev, MT_BCN_OFFSET(2), 0x58504840); + mt76_wr(dev, MT_BCN_OFFSET(3), 0x78706860); +} + +static int mt76x2u_init_hardware(struct mt76x2_dev *dev) +{ + static const u16 beacon_offsets[] = { + /* 512 byte per beacon */ + 0xc000, 0xc200, 0xc400, 0xc600, + 0xc800, 0xca00, 0xcc00, 0xce00, + 0xd000, 0xd200, 0xd400, 0xd600, + 0xd800, 0xda00, 0xdc00, 0xde00 + }; + const struct mt76_wcid_addr addr = { + .macaddr = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}, + .ba_mask = 0, + }; + int i, err; + + dev->beacon_offsets = beacon_offsets; + + mt76x2_reset_wlan(dev, true); + mt76x2u_power_on(dev); + + if (!mt76x2_wait_for_mac(dev)) + return -ETIMEDOUT; + + err = mt76x2u_mcu_fw_init(dev); + if (err < 0) + return err; + + if (!mt76_poll_msec(dev, MT_WPDMA_GLO_CFG, + MT_WPDMA_GLO_CFG_TX_DMA_BUSY | + MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 100)) + return -EIO; + + /* wait for asic ready after fw load. */ + if (!mt76x2_wait_for_mac(dev)) + return -ETIMEDOUT; + + mt76_wr(dev, MT_HEADER_TRANS_CTRL_REG, 0); + mt76_wr(dev, MT_TSO_CTRL, 0); + + err = mt76x2u_dma_init(dev); + if (err < 0) + return err; + + err = mt76x2u_mcu_init(dev); + if (err < 0) + goto err_dma; + + err = mt76x2u_init_eeprom(dev); + if (err < 0) + goto err_mcu; + + mt76x2u_mac_setaddr(dev, dev->mt76.eeprom.data + MT_EE_MAC_ADDR); + + err = mt76x2u_mac_reset(dev); + if (err < 0) + goto err_mcu; + + dev->rxfilter = mt76_rr(dev, MT_RX_FILTR_CFG); + + mt76x2u_init_beacon_offsets(dev); + + if (!mt76x2_wait_for_bbp(dev)) { + err = -ETIMEDOUT; + goto err_mcu; + } + + /* reset wcid table */ + for (i = 0; i < 254; i++) + mt76_wr_copy(dev, MT_WCID_ADDR(i), &addr, + sizeof(struct mt76_wcid_addr)); + + /* reset shared key table and pairwise key table */ + for (i = 0; i < 4; i++) + mt76_wr(dev, MT_SKEY_MODE_BASE_0 + 4 * i, 0); + for (i = 0; i < 256; i++) + mt76_wr(dev, MT_WCID_ATTR(i), 1); + + mt76_clear(dev, MT_BEACON_TIME_CFG, + MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | + MT_BEACON_TIME_CFG_TBTT_EN | + MT_BEACON_TIME_CFG_BEACON_TX); + + mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e); + mt76_wr(dev, MT_TXOP_CTRL_CFG, 0x583f); + + err = mt76x2u_mcu_load_cr(dev, MT_RF_BBP_CR, 0, 0); + if (err < 0) + goto err_mcu; + + mt76x2u_phy_set_rxpath(dev); + mt76x2u_phy_set_txdac(dev); + + return mt76x2u_mac_stop(dev); + +err_mcu: + mt76x2u_mcu_deinit(dev); +err_dma: + mt76x2u_dma_cleanup(dev); + + return err; +} + +int mt76x2u_register_device(struct mt76x2_dev *dev) +{ + struct ieee80211_hw *hw = mt76_hw(dev); + struct wiphy *wiphy = hw->wiphy; + int err; + + INIT_DELAYED_WORK(&dev->cal_work, mt76x2u_phy_calibrate); + INIT_DELAYED_WORK(&dev->stat_work, mt76x2u_tx_status_data); + mt76x2_init_device(dev); + + err = mt76x2u_init_hardware(dev); + if (err < 0) + return err; + + wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + + err = mt76_register_device(&dev->mt76, true, mt76x2_rates, + ARRAY_SIZE(mt76x2_rates)); + if (err) + goto fail; + + set_bit(MT76_STATE_INITIALIZED, &dev->mt76.state); + + mt76x2_init_debugfs(dev); + mt76x2_init_txpower(dev, &dev->mt76.sband_2g.sband); + mt76x2_init_txpower(dev, &dev->mt76.sband_5g.sband); + + return 0; + +fail: + mt76x2u_cleanup(dev); + return err; +} + +void mt76x2u_stop_hw(struct mt76x2_dev *dev) +{ + cancel_delayed_work_sync(&dev->stat_work); + cancel_delayed_work_sync(&dev->cal_work); + mt76x2u_mac_stop(dev); +} + +void mt76x2u_cleanup(struct mt76x2_dev *dev) +{ + mt76x2u_mcu_set_radio_state(dev, false); + mt76x2u_dma_cleanup(dev); + mt76x2u_stop_hw(dev); + mt76x2u_mcu_deinit(dev); +} diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2u_mac.c b/drivers/net/wireless/mediatek/mt76/mt76x2u_mac.c new file mode 100644 index 000000000000..472b5b6efb5a --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2u_mac.c @@ -0,0 +1,237 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "mt76x2u.h" +#include "mt76x2_eeprom.h" + +static void mt76x2u_mac_reset_counters(struct mt76x2_dev *dev) +{ + mt76_rr(dev, MT_RX_STAT_0); + mt76_rr(dev, MT_RX_STAT_1); + mt76_rr(dev, MT_RX_STAT_2); + mt76_rr(dev, MT_TX_STA_0); + mt76_rr(dev, MT_TX_STA_1); + mt76_rr(dev, MT_TX_STA_2); +} + +static void mt76x2u_mac_fixup_xtal(struct mt76x2_dev *dev) +{ + s8 offset = 0; + u16 eep_val; + + eep_val = mt76x2_eeprom_get(dev, MT_EE_XTAL_TRIM_2); + + offset = eep_val & 0x7f; + if ((eep_val & 0xff) == 0xff) + offset = 0; + else if (eep_val & 0x80) + offset = 0 - offset; + + eep_val >>= 8; + if (eep_val == 0x00 || eep_val == 0xff) { + eep_val = mt76x2_eeprom_get(dev, MT_EE_XTAL_TRIM_1); + eep_val &= 0xff; + + if (eep_val == 0x00 || eep_val == 0xff) + eep_val = 0x14; + } + + eep_val &= 0x7f; + mt76_rmw_field(dev, MT_VEND_ADDR(CFG, MT_XO_CTRL5), + MT_XO_CTRL5_C2_VAL, eep_val + offset); + mt76_set(dev, MT_VEND_ADDR(CFG, MT_XO_CTRL6), MT_XO_CTRL6_C2_CTRL); + + mt76_wr(dev, 0x504, 0x06000000); + mt76_wr(dev, 0x50c, 0x08800000); + mdelay(5); + mt76_wr(dev, 0x504, 0x0); + + /* decrease SIFS from 16us to 13us */ + mt76_rmw_field(dev, MT_XIFS_TIME_CFG, + MT_XIFS_TIME_CFG_OFDM_SIFS, 0xd); + mt76_rmw_field(dev, MT_BKOFF_SLOT_CFG, MT_BKOFF_SLOT_CFG_CC_DELAY, 1); + + /* init fce */ + mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN); + + eep_val = mt76x2_eeprom_get(dev, MT_EE_NIC_CONF_2); + switch (FIELD_GET(MT_EE_NIC_CONF_2_XTAL_OPTION, eep_val)) { + case 0: + mt76_wr(dev, MT_XO_CTRL7, 0x5c1fee80); + break; + case 1: + mt76_wr(dev, MT_XO_CTRL7, 0x5c1feed0); + break; + default: + break; + } +} + +int mt76x2u_mac_reset(struct mt76x2_dev *dev) +{ + mt76_wr(dev, MT_WPDMA_GLO_CFG, BIT(4) | BIT(5)); + + /* init pbf regs */ + mt76_wr(dev, MT_PBF_TX_MAX_PCNT, 0xefef3f1f); + mt76_wr(dev, MT_PBF_RX_MAX_PCNT, 0xfebf); + + mt76_write_mac_initvals(dev); + + mt76_wr(dev, MT_TX_LINK_CFG, 0x1020); + mt76_wr(dev, MT_AUTO_RSP_CFG, 0x13); + mt76_wr(dev, MT_MAX_LEN_CFG, 0x2f00); + mt76_wr(dev, MT_TX_RTS_CFG, 0x92b20); + + mt76_wr(dev, MT_WMM_AIFSN, 0x2273); + mt76_wr(dev, MT_WMM_CWMIN, 0x2344); + mt76_wr(dev, MT_WMM_CWMAX, 0x34aa); + + mt76_clear(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_RESET_CSR | + MT_MAC_SYS_CTRL_RESET_BBP); + + if (is_mt7612(dev)) + mt76_clear(dev, MT_COEXCFG0, MT_COEXCFG0_COEX_EN); + + mt76_set(dev, MT_EXT_CCA_CFG, 0xf000); + mt76_clear(dev, MT_TX_ALC_CFG_4, BIT(31)); + + mt76x2u_mac_fixup_xtal(dev); + + return 0; +} + +int mt76x2u_mac_start(struct mt76x2_dev *dev) +{ + mt76x2u_mac_reset_counters(dev); + + mt76_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_TX); + wait_for_wpdma(dev); + usleep_range(50, 100); + + mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter); + + mt76_wr(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_ENABLE_TX | + MT_MAC_SYS_CTRL_ENABLE_RX); + + return 0; +} + +int mt76x2u_mac_stop(struct mt76x2_dev *dev) +{ + int i, count = 0, val; + bool stopped = false; + u32 rts_cfg; + + rts_cfg = mt76_rr(dev, MT_TX_RTS_CFG); + mt76_wr(dev, MT_TX_RTS_CFG, rts_cfg & ~MT_TX_RTS_CFG_RETRY_LIMIT); + + mt76_clear(dev, MT_TXOP_CTRL_CFG, BIT(20)); + mt76_clear(dev, MT_TXOP_HLDR_ET, BIT(1)); + + /* wait tx dma to stop */ + for (i = 0; i < 2000; i++) { + val = mt76_rr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG)); + if (!(val & MT_USB_DMA_CFG_TX_BUSY) && i > 10) + break; + usleep_range(50, 100); + } + + /* page count on TxQ */ + for (i = 0; i < 200; i++) { + if (!(mt76_rr(dev, 0x0438) & 0xffffffff) && + !(mt76_rr(dev, 0x0a30) & 0x000000ff) && + !(mt76_rr(dev, 0x0a34) & 0xff00ff00)) + break; + usleep_range(10, 20); + } + + /* disable tx-rx */ + mt76_clear(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_ENABLE_RX | + MT_MAC_SYS_CTRL_ENABLE_TX); + + /* Wait for MAC to become idle */ + for (i = 0; i < 1000; i++) { + if (!(mt76_rr(dev, MT_MAC_STATUS) & MT_MAC_STATUS_TX) && + !mt76_rr(dev, MT_BBP(IBI, 12))) { + stopped = true; + break; + } + usleep_range(10, 20); + } + + if (!stopped) { + mt76_set(dev, MT_BBP(CORE, 4), BIT(1)); + mt76_clear(dev, MT_BBP(CORE, 4), BIT(1)); + + mt76_set(dev, MT_BBP(CORE, 4), BIT(0)); + mt76_clear(dev, MT_BBP(CORE, 4), BIT(0)); + } + + /* page count on RxQ */ + for (i = 0; i < 200; i++) { + if (!(mt76_rr(dev, 0x0430) & 0x00ff0000) && + !(mt76_rr(dev, 0x0a30) & 0xffffffff) && + !(mt76_rr(dev, 0x0a34) & 0xffffffff) && + ++count > 10) + break; + msleep(50); + } + + if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 2000)) + dev_warn(dev->mt76.dev, "MAC RX failed to stop\n"); + + /* wait rx dma to stop */ + for (i = 0; i < 2000; i++) { + val = mt76_rr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG)); + if (!(val & MT_USB_DMA_CFG_RX_BUSY) && i > 10) + break; + usleep_range(50, 100); + } + + mt76_wr(dev, MT_TX_RTS_CFG, rts_cfg); + + return 0; +} + +void mt76x2u_mac_resume(struct mt76x2_dev *dev) +{ + mt76_wr(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_ENABLE_TX | + MT_MAC_SYS_CTRL_ENABLE_RX); + mt76_set(dev, MT_TXOP_CTRL_CFG, BIT(20)); + mt76_set(dev, MT_TXOP_HLDR_ET, BIT(1)); +} + +void mt76x2u_mac_setaddr(struct mt76x2_dev *dev, u8 *addr) +{ + ether_addr_copy(dev->mt76.macaddr, addr); + + if (!is_valid_ether_addr(dev->mt76.macaddr)) { + eth_random_addr(dev->mt76.macaddr); + dev_info(dev->mt76.dev, + "Invalid MAC address, using random address %pM\n", + dev->mt76.macaddr); + } + + mt76_wr(dev, MT_MAC_ADDR_DW0, get_unaligned_le32(dev->mt76.macaddr)); + mt76_wr(dev, MT_MAC_ADDR_DW1, + get_unaligned_le16(dev->mt76.macaddr + 4) | + FIELD_PREP(MT_MAC_ADDR_DW1_U2ME_MASK, 0xff)); +} + diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2u_main.c b/drivers/net/wireless/mediatek/mt76/mt76x2u_main.c new file mode 100644 index 000000000000..ff4ec4f3bca8 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2u_main.c @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "mt76x2u.h" + +static int mt76x2u_start(struct ieee80211_hw *hw) +{ + struct mt76x2_dev *dev = hw->priv; + int ret; + + mutex_lock(&dev->mutex); + + ret = mt76x2u_mac_start(dev); + if (ret) + goto out; + + set_bit(MT76_STATE_RUNNING, &dev->mt76.state); + +out: + mutex_unlock(&dev->mutex); + return ret; +} + +static void mt76x2u_stop(struct ieee80211_hw *hw) +{ + struct mt76x2_dev *dev = hw->priv; + + mutex_lock(&dev->mutex); + clear_bit(MT76_STATE_RUNNING, &dev->mt76.state); + mt76x2u_stop_hw(dev); + mutex_unlock(&dev->mutex); +} + +static int mt76x2u_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct mt76x2_dev *dev = hw->priv; + struct mt76x2_vif *mvif = (struct mt76x2_vif *)vif->drv_priv; + unsigned int idx = 0; + + if (!ether_addr_equal(dev->mt76.macaddr, vif->addr)) + mt76x2u_mac_setaddr(dev, vif->addr); + + mvif->idx = idx; + mvif->group_wcid.idx = 254 - idx; + mvif->group_wcid.hw_key_idx = -1; + mt76x2_txq_init(dev, vif->txq); + + return 0; +} + +static int +mt76x2u_set_channel(struct mt76x2_dev *dev, + struct cfg80211_chan_def *chandef) +{ + int err; + + mt76_set_channel(&dev->mt76); + + cancel_delayed_work_sync(&dev->cal_work); + mt76x2u_mac_stop(dev); + + err = mt76x2u_phy_set_channel(dev, chandef); + + mt76x2u_mac_resume(dev); + + return err; +} + +static void +mt76x2u_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, u32 changed) +{ + struct mt76x2_dev *dev = hw->priv; + + mutex_lock(&dev->mutex); + + if (changed & BSS_CHANGED_ASSOC) { + mt76x2u_phy_channel_calibrate(dev); + mt76x2_apply_gain_adj(dev); + } + + mutex_unlock(&dev->mutex); +} + +static int +mt76x2u_config(struct ieee80211_hw *hw, u32 changed) +{ + struct mt76x2_dev *dev = hw->priv; + int err = 0; + + mutex_lock(&dev->mutex); + + if (changed & IEEE80211_CONF_CHANGE_MONITOR) { + if (!(hw->conf.flags & IEEE80211_CONF_MONITOR)) + dev->rxfilter |= MT_RX_FILTR_CFG_PROMISC; + else + dev->rxfilter &= ~MT_RX_FILTR_CFG_PROMISC; + mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter); + } + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + ieee80211_stop_queues(hw); + err = mt76x2u_set_channel(dev, &hw->conf.chandef); + ieee80211_wake_queues(hw); + } + mutex_unlock(&dev->mutex); + + return err; +} + +static void +mt76x2u_sw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + const u8 *mac) +{ + struct mt76x2_dev *dev = hw->priv; + + set_bit(MT76_SCANNING, &dev->mt76.state); +} + +static void +mt76x2u_sw_scan_complete(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct mt76x2_dev *dev = hw->priv; + + clear_bit(MT76_SCANNING, &dev->mt76.state); + mt76_txq_schedule_all(&dev->mt76); +} + +const struct ieee80211_ops mt76x2u_ops = { + .tx = mt76x2_tx, + .start = mt76x2u_start, + .stop = mt76x2u_stop, + .add_interface = mt76x2u_add_interface, + .remove_interface = mt76x2_remove_interface, + .sta_add = mt76x2_sta_add, + .sta_remove = mt76x2_sta_remove, + .set_key = mt76x2_set_key, + .ampdu_action = mt76x2_ampdu_action, + .config = mt76x2u_config, + .wake_tx_queue = mt76_wake_tx_queue, + .bss_info_changed = mt76x2u_bss_info_changed, + .configure_filter = mt76x2_configure_filter, + .conf_tx = mt76x2_conf_tx, + .sw_scan_start = mt76x2u_sw_scan, + .sw_scan_complete = mt76x2u_sw_scan_complete, + .sta_rate_tbl_update = mt76x2_sta_rate_tbl_update, +}; diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2u_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x2u_mcu.c new file mode 100644 index 000000000000..33def6cc4c63 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2u_mcu.c @@ -0,0 +1,648 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include + +#include "mt76x2u.h" +#include "mt76x2_eeprom.h" + +#define MT_CMD_HDR_LEN 4 +#define MT_INBAND_PACKET_MAX_LEN 192 +#define MT_MCU_MEMMAP_WLAN 0x410000 + +#define MCU_FW_URB_MAX_PAYLOAD 0x3900 +#define MCU_ROM_PATCH_MAX_PAYLOAD 2048 + +#define MT76U_MCU_ILM_OFFSET 0x80000 +#define MT76U_MCU_DLM_OFFSET 0x110000 +#define MT76U_MCU_ROM_PATCH_OFFSET 0x90000 + +static struct sk_buff *mt76x2u_mcu_msg_alloc(const void *data, int len) +{ + struct sk_buff *skb; + + skb = alloc_skb(MT_CMD_HDR_LEN + len + 8, GFP_KERNEL); + if (!skb) + return NULL; + + skb_reserve(skb, MT_CMD_HDR_LEN); + skb_put_data(skb, data, len); + + return skb; +} + +static void mt76x2u_mcu_complete_urb(struct urb *urb) +{ + struct completion *cmpl = urb->context; + + complete(cmpl); +} + +static int mt76x2u_mcu_wait_resp(struct mt76x2_dev *dev, u8 seq) +{ + int i, ret; + u32 rxfce; + + for (i = 0; i < 5; i++) { + if (!wait_for_completion_timeout(&dev->mcu.resp_cmpl, + msecs_to_jiffies(300))) + continue; + + if (mt76_usb_urb_error(dev->mcu.res_u.urb)) + dev_err(dev->mt76.dev, "MCU resp urb failed:%d\n", + dev->mcu.res_u.urb->status); + + rxfce = get_unaligned_le32(dev->mcu.res_u.buf); + ret = mt76_usb_submit_buf(&dev->mt76, USB_DIR_IN, + MT_EP_IN_CMD_RESP, + &dev->mcu.res_u, GFP_KERNEL, + mt76x2u_mcu_complete_urb, + &dev->mcu.resp_cmpl); + if (ret) + return ret; + + if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce)) + return 0; + + dev_err(dev->mt76.dev, "error: MCU resp evt:%lx seq:%hhx-%lx\n", + FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce), + seq, FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce)); + } + + dev_err(dev->mt76.dev, "error: %s timed out\n", __func__); + return -ETIMEDOUT; +} + +static int mt76x2u_mcu_send_msg(struct mt76x2_dev *dev, struct sk_buff *skb, + enum mcu_cmd cmd, bool wait_resp) +{ + struct usb_interface *intf = to_usb_interface(dev->mt76.dev); + struct usb_device *udev = interface_to_usbdev(intf); + struct mt76_usb *usb = &dev->mt76.usb; + unsigned int pipe; + int ret, sent; + u8 seq = 0; + u32 info; + + if (test_bit(MT76_REMOVED, &dev->mt76.state)) + return 0; + + mutex_lock(&dev->mcu.mutex); + + pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]); + if (wait_resp) { + seq = ++dev->mcu.msg_seq & 0xf; + if (!seq) + seq = ++dev->mcu.msg_seq & 0xf; + } + + info = FIELD_PREP(MT_MCU_MSG_CMD_SEQ, seq) | + FIELD_PREP(MT_MCU_MSG_CMD_TYPE, cmd) | + MT_MCU_MSG_TYPE_CMD; + ret = mt76x2u_dma_skb_info(skb, CPU_TX_PORT, info); + if (ret) + goto out; + + ret = usb_bulk_msg(udev, pipe, skb->data, skb->len, &sent, 500); + if (ret) + goto out; + + if (wait_resp) + ret = mt76x2u_mcu_wait_resp(dev, seq); + +out: + mutex_unlock(&dev->mcu.mutex); + + consume_skb(skb); + + return ret; +} + +static int +mt76x2u_mcu_function_select(struct mt76x2_dev *dev, enum mcu_function func, + u32 val) +{ + struct { + __le32 id; + __le32 value; + } __packed __aligned(4) msg = { + .id = cpu_to_le32(func), + .value = cpu_to_le32(val), + }; + struct sk_buff *skb; + + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + return mt76x2u_mcu_send_msg(dev, skb, CMD_FUN_SET_OP, + func != Q_SELECT); +} + +int mt76x2u_mcu_set_radio_state(struct mt76x2_dev *dev, bool val) +{ + struct { + __le32 mode; + __le32 level; + } __packed __aligned(4) msg = { + .mode = cpu_to_le32(val ? RADIO_ON : RADIO_OFF), + .level = cpu_to_le32(0), + }; + struct sk_buff *skb; + + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + return mt76x2u_mcu_send_msg(dev, skb, CMD_POWER_SAVING_OP, false); +} + +int mt76x2u_mcu_load_cr(struct mt76x2_dev *dev, u8 type, u8 temp_level, + u8 channel) +{ + struct { + u8 cr_mode; + u8 temp; + u8 ch; + u8 _pad0; + __le32 cfg; + } __packed __aligned(4) msg = { + .cr_mode = type, + .temp = temp_level, + .ch = channel, + }; + struct sk_buff *skb; + u32 val; + + val = BIT(31); + val |= (mt76x2_eeprom_get(dev, MT_EE_NIC_CONF_0) >> 8) & 0x00ff; + val |= (mt76x2_eeprom_get(dev, MT_EE_NIC_CONF_1) << 8) & 0xff00; + msg.cfg = cpu_to_le32(val); + + /* first set the channel without the extension channel info */ + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + return mt76x2u_mcu_send_msg(dev, skb, CMD_LOAD_CR, true); +} + +int mt76x2u_mcu_set_channel(struct mt76x2_dev *dev, u8 channel, u8 bw, + u8 bw_index, bool scan) +{ + struct { + u8 idx; + u8 scan; + u8 bw; + u8 _pad0; + + __le16 chainmask; + u8 ext_chan; + u8 _pad1; + + } __packed __aligned(4) msg = { + .idx = channel, + .scan = scan, + .bw = bw, + .chainmask = cpu_to_le16(dev->chainmask), + }; + struct sk_buff *skb; + + /* first set the channel without the extension channel info */ + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + + mt76x2u_mcu_send_msg(dev, skb, CMD_SWITCH_CHANNEL_OP, true); + + usleep_range(5000, 10000); + + msg.ext_chan = 0xe0 + bw_index; + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + + return mt76x2u_mcu_send_msg(dev, skb, CMD_SWITCH_CHANNEL_OP, true); +} + +int mt76x2u_mcu_calibrate(struct mt76x2_dev *dev, enum mcu_calibration type, + u32 val) +{ + struct { + __le32 id; + __le32 value; + } __packed __aligned(4) msg = { + .id = cpu_to_le32(type), + .value = cpu_to_le32(val), + }; + struct sk_buff *skb; + + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + return mt76x2u_mcu_send_msg(dev, skb, CMD_CALIBRATION_OP, true); +} + +int mt76x2u_mcu_init_gain(struct mt76x2_dev *dev, u8 channel, u32 gain, + bool force) +{ + struct { + __le32 channel; + __le32 gain_val; + } __packed __aligned(4) msg = { + .channel = cpu_to_le32(channel), + .gain_val = cpu_to_le32(gain), + }; + struct sk_buff *skb; + + if (force) + msg.channel |= cpu_to_le32(BIT(31)); + + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + return mt76x2u_mcu_send_msg(dev, skb, CMD_INIT_GAIN_OP, true); +} + +int mt76x2u_mcu_tssi_comp(struct mt76x2_dev *dev, + struct mt76x2_tssi_comp *tssi_data) +{ + struct { + __le32 id; + struct mt76x2_tssi_comp data; + } __packed __aligned(4) msg = { + .id = cpu_to_le32(MCU_CAL_TSSI_COMP), + .data = *tssi_data, + }; + struct sk_buff *skb; + + skb = mt76x2u_mcu_msg_alloc(&msg, sizeof(msg)); + if (!skb) + return -ENOMEM; + return mt76x2u_mcu_send_msg(dev, skb, CMD_CALIBRATION_OP, true); +} + +static int mt76x2u_mcu_init_rx(struct mt76x2_dev *dev) +{ + int err; + + err = mt76_usb_buf_alloc(&dev->mt76, &dev->mcu.res_u, 512); + if (err < 0) + return err; + + err = mt76_usb_submit_buf(&dev->mt76, USB_DIR_IN, MT_EP_IN_CMD_RESP, + &dev->mcu.res_u, GFP_KERNEL, + mt76x2u_mcu_complete_urb, + &dev->mcu.resp_cmpl); + if (err < 0) + mt76_usb_buf_free(&dev->mt76, &dev->mcu.res_u); + + return err; +} + +static void mt76x2u_mcu_fw_reset(struct mt76x2_dev *dev) +{ + mt76_usb_vendor_request(&dev->mt76, MT_VEND_DEV_MODE, + USB_DIR_OUT | USB_TYPE_VENDOR, + 0x1, 0, NULL, 0); +} + +static void mt76x2u_mcu_load_ivb(struct mt76x2_dev *dev) +{ + mt76_usb_vendor_request(&dev->mt76, MT_VEND_DEV_MODE, + USB_DIR_OUT | USB_TYPE_VENDOR, + 0x12, 0, NULL, 0); +} + +static void mt7612u_mcu_enable_patch(struct mt76x2_dev *dev) +{ + struct mt76_usb *usb = &dev->mt76.usb; + const u8 data[] = { + 0x6f, 0xfc, 0x08, 0x01, + 0x20, 0x04, 0x00, 0x00, + 0x00, 0x09, 0x00, + }; + + memcpy(usb->data, data, sizeof(data)); + mt76_usb_vendor_request(&dev->mt76, MT_VEND_DEV_MODE, + USB_DIR_OUT | USB_TYPE_CLASS, + 0x12, 0, usb->data, sizeof(data)); +} + +static void mt7612u_mcu_reset_wmt(struct mt76x2_dev *dev) +{ + struct mt76_usb *usb = &dev->mt76.usb; + u8 data[] = { + 0x6f, 0xfc, 0x05, 0x01, + 0x07, 0x01, 0x00, 0x04 + }; + + memcpy(usb->data, data, sizeof(data)); + mt76_usb_vendor_request(&dev->mt76, MT_VEND_DEV_MODE, + USB_DIR_OUT | USB_TYPE_CLASS, + 0x12, 0, usb->data, sizeof(data)); +} + +static int +__mt76x2u_mcu_fw_send_data(struct mt76x2_dev *dev, struct mt76_usb_buf *buf, + const void *data, int len, u32 dst_addr) +{ + DECLARE_COMPLETION_ONSTACK(cmpl); + __le32 info; + u32 val; + int err; + + info = cpu_to_le32(FIELD_PREP(MT_MCU_MSG_PORT, CPU_TX_PORT) | + FIELD_PREP(MT_MCU_MSG_LEN, len) | + MT_MCU_MSG_TYPE_CMD); + + memcpy(buf->buf, &info, sizeof(info)); + memcpy(buf->buf + sizeof(info), data, len); + memset(buf->buf + sizeof(info) + len, 0, 4); + + mt76_usb_single_wr(&dev->mt76, MT_VEND_WRITE_FCE, + MT_FCE_DMA_ADDR, dst_addr); + len = roundup(len, 4); + mt76_usb_single_wr(&dev->mt76, MT_VEND_WRITE_FCE, + MT_FCE_DMA_LEN, len << 16); + + buf->len = MT_CMD_HDR_LEN + len + sizeof(info); + err = mt76_usb_submit_buf(&dev->mt76, USB_DIR_OUT, + MT_EP_OUT_INBAND_CMD, + buf, GFP_KERNEL, + mt76x2u_mcu_complete_urb, &cmpl); + if (err < 0) + return err; + + if (!wait_for_completion_timeout(&cmpl, + msecs_to_jiffies(1000))) { + dev_err(dev->mt76.dev, "firmware upload timed out\n"); + usb_kill_urb(buf->urb); + return -ETIMEDOUT; + } + + if (mt76_usb_urb_error(buf->urb)) { + dev_err(dev->mt76.dev, "firmware upload failed: %d\n", + buf->urb->status); + return buf->urb->status; + } + + val = mt76_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX); + val++; + mt76_wr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX, val); + + return 0; +} + +static int +mt76x2u_mcu_fw_send_data(struct mt76x2_dev *dev, const void *data, + int data_len, u32 max_payload, u32 offset) +{ + int err, len, pos = 0, max_len = max_payload - 8; + struct mt76_usb_buf buf; + + err = mt76_usb_buf_alloc(&dev->mt76, &buf, max_payload); + if (err < 0) + return err; + + while (data_len > 0) { + len = min_t(int, data_len, max_len); + err = __mt76x2u_mcu_fw_send_data(dev, &buf, data + pos, + len, offset + pos); + if (err < 0) + break; + + data_len -= len; + pos += len; + usleep_range(5000, 10000); + } + + /* we need to reset original buffer size */ + buf.len = max_payload; + mt76_usb_buf_free(&dev->mt76, &buf); + + return err; +} + +static int mt76x2u_mcu_load_rom_patch(struct mt76x2_dev *dev) +{ + bool rom_protect = !is_mt7612(dev); + struct mt76x2_patch_header *hdr; + u32 val, patch_mask, patch_reg; + const struct firmware *fw; + int err; + + if (rom_protect && + !mt76_poll_msec(dev, MT_MCU_SEMAPHORE_03, 1, 1, 600)) { + dev_err(dev->mt76.dev, + "could not get hardware semaphore for ROM PATCH\n"); + return -ETIMEDOUT; + } + + if (mt76xx_rev(dev) >= MT76XX_REV_E3) { + patch_mask = BIT(0); + patch_reg = MT_MCU_CLOCK_CTL; + } else { + patch_mask = BIT(1); + patch_reg = MT_MCU_COM_REG0; + } + + if (rom_protect && (mt76_rr(dev, patch_reg) & patch_mask)) { + dev_info(dev->mt76.dev, "ROM patch already applied\n"); + return 0; + } + + err = request_firmware(&fw, MT7662U_ROM_PATCH, dev->mt76.dev); + if (err < 0) + return err; + + if (!fw || !fw->data || fw->size <= sizeof(*hdr)) { + dev_err(dev->mt76.dev, "failed to load firmware\n"); + err = -EIO; + goto out; + } + + hdr = (struct mt76x2_patch_header *)fw->data; + dev_info(dev->mt76.dev, "ROM patch build: %.15s\n", hdr->build_time); + + /* enable USB_DMA_CFG */ + val = MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN | + FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, 0x20); + mt76_wr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG), val); + + /* vendor reset */ + mt76x2u_mcu_fw_reset(dev); + usleep_range(5000, 10000); + + /* enable FCE to send in-band cmd */ + mt76_wr(dev, MT_FCE_PSE_CTRL, 0x1); + /* FCE tx_fs_base_ptr */ + mt76_wr(dev, MT_TX_CPU_FROM_FCE_BASE_PTR, 0x400230); + /* FCE tx_fs_max_cnt */ + mt76_wr(dev, MT_TX_CPU_FROM_FCE_MAX_COUNT, 0x1); + /* FCE pdma enable */ + mt76_wr(dev, MT_FCE_PDMA_GLOBAL_CONF, 0x44); + /* FCE skip_fs_en */ + mt76_wr(dev, MT_FCE_SKIP_FS, 0x3); + + err = mt76x2u_mcu_fw_send_data(dev, fw->data + sizeof(*hdr), + fw->size - sizeof(*hdr), + MCU_ROM_PATCH_MAX_PAYLOAD, + MT76U_MCU_ROM_PATCH_OFFSET); + if (err < 0) { + err = -EIO; + goto out; + } + + mt7612u_mcu_enable_patch(dev); + mt7612u_mcu_reset_wmt(dev); + mdelay(20); + + if (!mt76_poll_msec(dev, patch_reg, patch_mask, patch_mask, 100)) { + dev_err(dev->mt76.dev, "failed to load ROM patch\n"); + err = -ETIMEDOUT; + } + +out: + if (rom_protect) + mt76_wr(dev, MT_MCU_SEMAPHORE_03, 1); + release_firmware(fw); + return err; +} + +static int mt76x2u_mcu_load_firmware(struct mt76x2_dev *dev) +{ + u32 val, dlm_offset = MT76U_MCU_DLM_OFFSET; + const struct mt76x2_fw_header *hdr; + int err, len, ilm_len, dlm_len; + const struct firmware *fw; + + err = request_firmware(&fw, MT7662U_FIRMWARE, dev->mt76.dev); + if (err < 0) + return err; + + if (!fw || !fw->data || fw->size < sizeof(*hdr)) { + err = -EINVAL; + goto out; + } + + hdr = (const struct mt76x2_fw_header *)fw->data; + ilm_len = le32_to_cpu(hdr->ilm_len); + dlm_len = le32_to_cpu(hdr->dlm_len); + len = sizeof(*hdr) + ilm_len + dlm_len; + if (fw->size != len) { + err = -EINVAL; + goto out; + } + + val = le16_to_cpu(hdr->fw_ver); + dev_info(dev->mt76.dev, "Firmware Version: %d.%d.%02d\n", + (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf); + + val = le16_to_cpu(hdr->build_ver); + dev_info(dev->mt76.dev, "Build: %x\n", val); + dev_info(dev->mt76.dev, "Build Time: %.16s\n", hdr->build_time); + + /* vendor reset */ + mt76x2u_mcu_fw_reset(dev); + usleep_range(5000, 10000); + + /* enable USB_DMA_CFG */ + val = MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN | + FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, 0x20); + mt76_wr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG), val); + /* enable FCE to send in-band cmd */ + mt76_wr(dev, MT_FCE_PSE_CTRL, 0x1); + /* FCE tx_fs_base_ptr */ + mt76_wr(dev, MT_TX_CPU_FROM_FCE_BASE_PTR, 0x400230); + /* FCE tx_fs_max_cnt */ + mt76_wr(dev, MT_TX_CPU_FROM_FCE_MAX_COUNT, 0x1); + /* FCE pdma enable */ + mt76_wr(dev, MT_FCE_PDMA_GLOBAL_CONF, 0x44); + /* FCE skip_fs_en */ + mt76_wr(dev, MT_FCE_SKIP_FS, 0x3); + + /* load ILM */ + err = mt76x2u_mcu_fw_send_data(dev, fw->data + sizeof(*hdr), + ilm_len, MCU_FW_URB_MAX_PAYLOAD, + MT76U_MCU_ILM_OFFSET); + if (err < 0) { + err = -EIO; + goto out; + } + + /* load DLM */ + if (mt76xx_rev(dev) >= MT76XX_REV_E3) + dlm_offset += 0x800; + err = mt76x2u_mcu_fw_send_data(dev, fw->data + sizeof(*hdr) + ilm_len, + dlm_len, MCU_FW_URB_MAX_PAYLOAD, + dlm_offset); + if (err < 0) { + err = -EIO; + goto out; + } + + mt76x2u_mcu_load_ivb(dev); + if (!mt76_poll_msec(dev, MT_MCU_COM_REG0, 1, 1, 100)) { + dev_err(dev->mt76.dev, "firmware failed to start\n"); + err = -ETIMEDOUT; + goto out; + } + + mt76_set(dev, MT_MCU_COM_REG0, BIT(1)); + /* enable FCE to send in-band cmd */ + mt76_wr(dev, MT_FCE_PSE_CTRL, 0x1); + dev_dbg(dev->mt76.dev, "firmware running\n"); + +out: + release_firmware(fw); + return err; +} + +int mt76x2u_mcu_fw_init(struct mt76x2_dev *dev) +{ + int err; + + mutex_init(&dev->mcu.mutex); + + err = mt76x2u_mcu_load_rom_patch(dev); + if (err < 0) + return err; + + return mt76x2u_mcu_load_firmware(dev); +} + +int mt76x2u_mcu_init(struct mt76x2_dev *dev) +{ + int err; + + init_completion(&dev->mcu.resp_cmpl); + + err = mt76x2u_mcu_init_rx(dev); + if (err < 0) + return err; + + err = mt76x2u_mcu_function_select(dev, Q_SELECT, 1); + if (err < 0) + return err; + + return mt76x2u_mcu_set_radio_state(dev, true); +} + +void mt76x2u_mcu_deinit(struct mt76x2_dev *dev) +{ + usb_kill_urb(dev->mcu.res_u.urb); + mt76_usb_buf_free(&dev->mt76, &dev->mcu.res_u); +} diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2u_phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2u_phy.c new file mode 100644 index 000000000000..46ded237cf9d --- /dev/null +++ b/drivers/net/wireless/mediatek/mt76/mt76x2u_phy.c @@ -0,0 +1,264 @@ +/* + * Copyright (C) 2018 Lorenzo Bianconi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "mt76x2u.h" +#include "mt76x2_eeprom.h" + +void mt76x2u_phy_set_rxpath(struct mt76x2_dev *dev) +{ + u32 val; + + val = mt76_rr(dev, MT_BBP(AGC, 0)); + val &= ~BIT(4); + + switch (dev->chainmask & 0xf) { + case 2: + val |= BIT(3); + break; + default: + val &= ~BIT(3); + break; + } + mt76_wr(dev, MT_BBP(AGC, 0), val); +} + +void mt76x2u_phy_set_txdac(struct mt76x2_dev *dev) +{ + int txpath; + + txpath = (dev->chainmask >> 8) & 0xf; + switch (txpath) { + case 2: + mt76_set(dev, MT_BBP(TXBE, 5), 0x3); + break; + default: + mt76_clear(dev, MT_BBP(TXBE, 5), 0x3); + break; + } +} + +void mt76x2u_phy_channel_calibrate(struct mt76x2_dev *dev) +{ + struct ieee80211_channel *chan = dev->mt76.chandef.chan; + bool is_5ghz = chan->band == NL80211_BAND_5GHZ; + + if (mt76x2_channel_silent(dev)) + return; + + mt76x2u_mac_stop(dev); + + if (is_5ghz) + mt76x2u_mcu_calibrate(dev, MCU_CAL_LC, 0); + + mt76x2u_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz); + mt76x2u_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz); + mt76x2u_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz); + mt76x2u_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0); + + mt76x2u_mac_resume(dev); +} + +static void +mt76x2u_phy_tssi_compensate(struct mt76x2_dev *dev) +{ + struct ieee80211_channel *chan = dev->mt76.chandef.chan; + struct mt76x2_tx_power_info txp; + struct mt76x2_tssi_comp t = {}; + + if (!dev->cal.tssi_cal_done) + return; + + if (!dev->cal.tssi_comp_pending) { + /* TSSI trigger */ + t.cal_mode = BIT(0); + mt76x2u_mcu_tssi_comp(dev, &t); + dev->cal.tssi_comp_pending = true; + } else { + if (mt76_rr(dev, MT_BBP(CORE, 34)) & BIT(4)) + return; + + dev->cal.tssi_comp_pending = false; + mt76x2_get_power_info(dev, &txp, chan); + + if (mt76x2_ext_pa_enabled(dev, chan->band)) + t.pa_mode = 1; + + t.cal_mode = BIT(1); + t.slope0 = txp.chain[0].tssi_slope; + t.offset0 = txp.chain[0].tssi_offset; + t.slope1 = txp.chain[1].tssi_slope; + t.offset1 = txp.chain[1].tssi_offset; + mt76x2u_mcu_tssi_comp(dev, &t); + + if (t.pa_mode || dev->cal.dpd_cal_done) + return; + + usleep_range(10000, 20000); + mt76x2u_mcu_calibrate(dev, MCU_CAL_DPD, chan->hw_value); + dev->cal.dpd_cal_done = true; + } +} + +void mt76x2u_phy_calibrate(struct work_struct *work) +{ + struct mt76x2_dev *dev; + + dev = container_of(work, struct mt76x2_dev, cal_work.work); + mt76x2u_phy_tssi_compensate(dev); + + ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work, + MT_CALIBRATE_INTERVAL); +} + +int mt76x2u_phy_set_channel(struct mt76x2_dev *dev, + struct cfg80211_chan_def *chandef) +{ + u32 ext_cca_chan[4] = { + [0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)), + [1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)), + [2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)), + [3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) | + FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)), + }; + bool scan = test_bit(MT76_SCANNING, &dev->mt76.state); + struct ieee80211_channel *chan = chandef->chan; + u8 channel = chan->hw_value, bw, bw_index; + int ch_group_index, freq, freq1, ret; + + dev->cal.channel_cal_done = false; + freq = chandef->chan->center_freq; + freq1 = chandef->center_freq1; + + switch (chandef->width) { + case NL80211_CHAN_WIDTH_40: + bw = 1; + if (freq1 > freq) { + bw_index = 1; + ch_group_index = 0; + } else { + bw_index = 3; + ch_group_index = 1; + } + channel += 2 - ch_group_index * 4; + break; + case NL80211_CHAN_WIDTH_80: + ch_group_index = (freq - freq1 + 30) / 20; + if (WARN_ON(ch_group_index < 0 || ch_group_index > 3)) + ch_group_index = 0; + bw = 2; + bw_index = ch_group_index; + channel += 6 - ch_group_index * 4; + break; + default: + bw = 0; + bw_index = 0; + ch_group_index = 0; + break; + } + + mt76x2_read_rx_gain(dev); + mt76x2_phy_set_txpower_regs(dev, chan->band); + mt76x2_configure_tx_delay(dev, chan->band, bw); + mt76x2_phy_set_txpower(dev); + + mt76x2_phy_set_band(dev, chan->band, ch_group_index & 1); + mt76x2_phy_set_bw(dev, chandef->width, ch_group_index); + + mt76_rmw(dev, MT_EXT_CCA_CFG, + (MT_EXT_CCA_CFG_CCA0 | + MT_EXT_CCA_CFG_CCA1 | + MT_EXT_CCA_CFG_CCA2 | + MT_EXT_CCA_CFG_CCA3 | + MT_EXT_CCA_CFG_CCA_MASK), + ext_cca_chan[ch_group_index]); + + ret = mt76x2u_mcu_set_channel(dev, channel, bw, bw_index, scan); + if (ret) + return ret; + + mt76x2u_mcu_init_gain(dev, channel, dev->cal.rx.mcu_gain, true); + + /* Enable LDPC Rx */ + if (mt76xx_rev(dev) >= MT76XX_REV_E3) + mt76_set(dev, MT_BBP(RXO, 13), BIT(10)); + + if (!dev->cal.init_cal_done) { + u8 val = mt76x2_eeprom_get(dev, MT_EE_BT_RCAL_RESULT); + + if (val != 0xff) + mt76x2u_mcu_calibrate(dev, MCU_CAL_R, 0); + } + + mt76x2u_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel); + + /* Rx LPF calibration */ + if (!dev->cal.init_cal_done) + mt76x2u_mcu_calibrate(dev, MCU_CAL_RC, 0); + dev->cal.init_cal_done = true; + + mt76_wr(dev, MT_BBP(AGC, 61), 0xff64a4e2); + mt76_wr(dev, MT_BBP(AGC, 7), 0x08081010); + mt76_wr(dev, MT_BBP(AGC, 11), 0x00000404); + mt76_wr(dev, MT_BBP(AGC, 2), 0x00007070); + mt76_wr(dev, MT_TXOP_CTRL_CFG, 0X04101b3f); + + mt76_set(dev, MT_BBP(TXO, 4), BIT(25)); + mt76_set(dev, MT_BBP(RXO, 13), BIT(8)); + + if (scan) + return 0; + + if (mt76x2_tssi_enabled(dev)) { + /* init default values for temp compensation */ + mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, + 0x38); + mt76_rmw_field(dev, MT_TX_ALC_CFG_2, MT_TX_ALC_CFG_2_TEMP_COMP, + 0x38); + + /* init tssi calibration */ + if (!mt76x2_channel_silent(dev)) { + struct ieee80211_channel *chan; + u32 flag = 0; + + chan = dev->mt76.chandef.chan; + if (chan->band == NL80211_BAND_5GHZ) + flag |= BIT(0); + if (mt76x2_ext_pa_enabled(dev, chan->band)) + flag |= BIT(8); + mt76x2u_mcu_calibrate(dev, MCU_CAL_TSSI, flag); + dev->cal.tssi_cal_done = true; + } + } + + ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work, + MT_CALIBRATE_INTERVAL); + return 0; +}