@@ -596,6 +596,35 @@ struct cfg80211_chan_def {
struct ieee80211_edmg edmg;
};
+enum ieee80211_tid_conf_mask {
+ IEEE80211_TID_CONF_NOACK = BIT(0),
+};
+
+/**
+ * struct ieee80211_tid_cfg - TID specific configuration
+ * @tid: TID number
+ * @tid_conf_mask: bitmap indicating which parameter changed
+ * see %enum ieee80211_tid_conf_mask
+ * @noack: noack configuration value for the TID
+ */
+struct ieee80211_tid_cfg {
+ u8 tid;
+ u32 tid_conf_mask;
+ u8 noack;
+};
+
+/**
+ * struct ieee80211_tid_config - TID configuration
+ * @peer: Station's MAC address
+ * @n_tid_conf: Number of TID specific configurations to be applied
+ * @tid_conf: Configuration change info
+ */
+struct ieee80211_tid_config {
+ const u8 *peer;
+ u32 n_tid_conf;
+ struct ieee80211_tid_cfg tid_conf[];
+};
+
/**
* cfg80211_get_chandef_type - return old channel type from chandef
* @chandef: the channel definition
@@ -3625,6 +3654,10 @@ struct cfg80211_update_owe_info {
*
* @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame
* and overrule HWMP path selection algorithm.
+ * @set_tid_config: TID specific configuration. Apply this configuration for
+ * all the connected stations in the BSS if peer is %NULL. Otherwise
+ * apply this configuration to the specific station.
+ * This callback may sleep.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3943,6 +3976,8 @@ struct cfg80211_ops {
struct cfg80211_update_owe_info *owe_info);
int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev,
const u8 *buf, size_t len);
+ int (*set_tid_config)(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf);
};
/*
@@ -1109,6 +1109,10 @@
* peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
* content. The frame is ethernet data.
*
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
+ * is passed through this command using %NL80211_ATTR_TID_CONFIG
+ * nested attributes.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1333,6 +1337,8 @@ enum nl80211_commands {
NL80211_CMD_PROBE_MESH_LINK,
+ NL80211_CMD_SET_TID_CONFIG,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2381,6 +2387,9 @@ enum nl80211_commands {
* the allowed channel bandwidth configurations. (u8 attribute)
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
*
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
+ * nested attribute with %NL80211_TID_CONFIG_ATTR_* sub-attributes.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2843,6 +2852,8 @@ enum nl80211_attrs {
NL80211_ATTR_WIPHY_EDMG_CHANNELS,
NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
+ NL80211_ATTR_TID_CONFIG,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -4682,6 +4693,47 @@ enum nl80211_tx_power_setting {
};
/**
+ * enum nl80211_tid_config - TID config state
+ * @NL80211_TID_CONFIG_DEFAULT: Default config for the TID. This is to
+ * notify driver to reset the previous config and use vif specific
+ * default config
+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
+ * NL80211_TID_CONFIG_DISABLE: Disable config for the TID
+ */
+enum nl80211_tid_config {
+ NL80211_TID_CONFIG_DEFAULT,
+ NL80211_TID_CONFIG_ENABLE,
+ NL80211_TID_CONFIG_DISABLE,
+};
+
+/* enum nl80211_tid_config_attr - TID specific configuration.
+ * @NL80211_TID_CONFIG_ATTR_TID: a TID value (u8 attribute).
+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
+ * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
+ * Its type is u8, if the peer MAC address is passed in %NL80211_ATTR_MAC,
+ * then the noack configuration is applied to the data frame for the tid
+ * to that connected station. This configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, then this
+ * configuration should be treated as per-netdev configuration.
+ * This configuration will be cleared when the interface goes down and on
+ * the disconnection from a BSS. Driver supporting this feature should
+ * advertise NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and
+ * NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG for supporting per sta
+ * configuration.
+ */
+enum nl80211_tid_config_attr {
+ __NL80211_TID_CONFIG_ATTR_INVALID,
+ NL80211_TID_CONFIG_ATTR_TID,
+ NL80211_TID_CONFIG_ATTR_NOACK,
+
+ /* keep last */
+ __NL80211_TID_CONFIG_ATTR_AFTER_LAST,
+ NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_packet_pattern_attr - packet pattern attribute
* @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
* @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
@@ -5492,6 +5544,11 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
* station mode (SAE password is passed as part of the connect command).
*
+ * @NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG: Driver supports per TID NoAck
+ * policy functionality.
+ * @NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG: Driver supports STA specific NoAck
+ * policy functionality.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5537,6 +5594,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_EXT_KEY_ID,
NL80211_EXT_FEATURE_STA_TX_PWR,
NL80211_EXT_FEATURE_SAE_OFFLOAD,
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -321,6 +321,13 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_RANGE(NLA_U8, 1, 20),
};
+static const struct nla_policy
+nl80211_tid_config_attr_policy[NL80211_TID_CONFIG_ATTR_MAX + 1] = {
+ [NL80211_TID_CONFIG_ATTR_TID] = { .type = NLA_U8 },
+ [NL80211_TID_CONFIG_ATTR_NOACK] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+};
+
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[0] = { .strict_start_type = NL80211_ATTR_HE_OBSS_PD },
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
@@ -624,6 +631,8 @@ static int validate_ie_attr(const struct nlattr *attr,
.len = SAE_PASSWORD_MAX_LEN },
[NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
[NL80211_ATTR_HE_OBSS_PD] = NLA_POLICY_NESTED(he_obss_pd_policy),
+ [NL80211_ATTR_TID_CONFIG] =
+ NLA_POLICY_NESTED_ARRAY(nl80211_tid_config_attr_policy),
};
/* policy for the key attributes */
@@ -13788,6 +13797,112 @@ static int nl80211_probe_mesh_link(struct sk_buff *skb, struct genl_info *info)
return rdev_probe_mesh_link(rdev, dev, dest, buf, len);
}
+static int
+nl80211_check_tid_config_support(struct cfg80211_registered_device *rdev,
+ struct netlink_ext_ack *extack,
+ const u8 *peer, struct nlattr *attr,
+ enum nl80211_ext_feature_index per_tid_config,
+ enum nl80211_ext_feature_index per_sta_config)
+{
+ if (!wiphy_ext_feature_isset(&rdev->wiphy, per_tid_config)) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "TID specific configuration not supported");
+ return -ENOTSUPP;
+ }
+
+ if (peer && !wiphy_ext_feature_isset(&rdev->wiphy, per_sta_config)) {
+ NL_SET_ERR_MSG_ATTR(extack, attr, "peer specific TID configuration not supported");
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int parse_tid_conf(struct cfg80211_registered_device *rdev,
+ struct nlattr *attrs[],
+ struct ieee80211_tid_cfg *tid_conf,
+ struct genl_info *info, const u8 *peer)
+{
+ struct netlink_ext_ack *extack = info->extack;
+ int err;
+
+ tid_conf->tid = nla_get_u8(attrs[NL80211_TID_CONFIG_ATTR_TID]);
+ if (attrs[NL80211_TID_CONFIG_ATTR_NOACK]) {
+ err = nl80211_check_tid_config_support(rdev, extack, peer,
+ attrs[NL80211_TID_CONFIG_ATTR_NOACK],
+ NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG,
+ NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG);
+ if (err)
+ return err;
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_NOACK;
+ tid_conf->noack =
+ nla_get_u8(attrs[NL80211_TID_CONFIG_ATTR_NOACK]);
+ }
+
+ return 0;
+}
+
+static int nl80211_set_tid_config(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct nlattr *attrs[NL80211_TID_CONFIG_ATTR_MAX + 1];
+ struct net_device *dev = info->user_ptr[1];
+ struct ieee80211_tid_config *tid_config;
+ struct nlattr *tid;
+ int conf_idx = 0, rem_conf;
+ int ret = -EINVAL;
+ u32 num_conf = 0;
+
+ if (!info->attrs[NL80211_ATTR_TID_CONFIG])
+ return -EINVAL;
+
+ if (!rdev->ops->set_tid_config)
+ return -EOPNOTSUPP;
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf)
+ num_conf++;
+
+ tid_config = kzalloc(struct_size(tid_config, tid_conf, num_conf),
+ GFP_KERNEL);
+ if (!tid_config)
+ return -ENOMEM;
+
+ tid_config->n_tid_conf = num_conf;
+
+ if (info->attrs[NL80211_ATTR_MAC])
+ tid_config->peer = nla_data(info->attrs[NL80211_ATTR_MAC]);
+
+ nla_for_each_nested(tid, info->attrs[NL80211_ATTR_TID_CONFIG],
+ rem_conf) {
+ ret = nla_parse_nested(attrs, NL80211_TID_CONFIG_ATTR_MAX,
+ tid, NULL, NULL);
+
+ if (ret)
+ goto bad_tid_conf;
+
+ if (!attrs[NL80211_TID_CONFIG_ATTR_TID]) {
+ ret = -EINVAL;
+ goto bad_tid_conf;
+ }
+
+ ret = parse_tid_conf(rdev, attrs,
+ &tid_config->tid_conf[conf_idx],
+ info, tid_config->peer);
+ if (ret)
+ goto bad_tid_conf;
+
+ conf_idx++;
+ }
+
+ ret = rdev_set_tid_config(rdev, dev, tid_config);
+
+bad_tid_conf:
+ kfree(tid_config);
+ return ret;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -14742,6 +14857,13 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_SET_TID_CONFIG,
+ .doit = nl80211_set_tid_config,
+ .flags = GENL_UNS_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_family nl80211_fam __ro_after_init = {
@@ -1299,4 +1299,16 @@ static inline int rdev_update_owe_info(struct cfg80211_registered_device *rdev,
return ret;
}
+static inline int rdev_set_tid_config(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_tid_config *tid_conf)
+{
+ int ret;
+
+ trace_rdev_set_tid_config(&rdev->wiphy, dev, tid_conf);
+ ret = rdev->ops->set_tid_config(&rdev->wiphy, dev, tid_conf);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
#endif /* __CFG80211_RDEV_OPS */
@@ -3458,6 +3458,23 @@
WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(dest))
);
+TRACE_EVENT(rdev_set_tid_config,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ struct ieee80211_tid_config *tid_conf),
+ TP_ARGS(wiphy, netdev, tid_conf),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(peer)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(peer, tid_conf->peer);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", peer: " MAC_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer))
+);
#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
Add a new NL command, NL80211_CMD_SET_TID_CONFIG to support data TID specific configuration. This per TID configurations are passed in NL80211_TID_CONFIG_ATTR_TID which is a nested attribute. This patch adds support to configure per TID noack policy through NL80211_TID_CONFIG_ATTR_NOACK attribute. Data TID value for this configuration will be passed through NL80211_TID_CONFIG_ATTR_TID attribute. When the user-space wants this configuration peer specific rather than being applied for all the connected stations, MAC address of the peer can be passed in NL80211_ATTR_MAC attribute. This patch introduced enum ieee80211_tid_conf_mask to notify the driver that which configuration modified. Driver supporting data TID specific noack policy configuration should be advertise through NL80211_EXT_FEATURE_PER_TID_NOACK_CONFIG and supporting per STA data TID noack policy configuration should be advertise through NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> --- include/net/cfg80211.h | 35 ++++++++++++ include/uapi/linux/nl80211.h | 59 ++++++++++++++++++++ net/wireless/nl80211.c | 122 ++++++++++++++++++++++++++++++++++++++++++ net/wireless/rdev-ops.h | 12 +++++ net/wireless/trace.h | 17 ++++++ 5 files changed, 245 insertions(+)