| Message ID | 1593194502-13164-3-git-send-email-pillair@codeaurora.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 9e69fe31ca9ae18a06e1a468d9179505066a85fe |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | ath10k: Add chain-1 voltage regulator voting | expand |
Hi, On Fri, Jun 26, 2020 at 11:02 AM Rakesh Pillai <pillair@codeaurora.org> wrote: > > Add support to vote for chain-1 voltage regulator > in WCN3990. > > Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 > > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> > --- > drivers/net/wireless/ath/ath10k/snoc.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c > index 645ed5f..407a074 100644 > --- a/drivers/net/wireless/ath/ath10k/snoc.c > +++ b/drivers/net/wireless/ath/ath10k/snoc.c > @@ -45,6 +45,7 @@ static const char * const ath10k_regulators[] = { > "vdd-1.8-xo", > "vdd-1.3-rfa", > "vdd-3.3-ch0", > + "vdd-3.3-ch1", Reviewed-by: Douglas Anderson <dianders@chromium.org> ...with the slight nit that ${SUBJECT} and description should probably call it "chan1" and not "chain1". Presumably the maintainer can fix when applying. -Doug
> -----Original Message----- > From: Doug Anderson <dianders@chromium.org> > Sent: Saturday, June 27, 2020 3:22 AM > To: Rakesh Pillai <pillair@codeaurora.org>; Kalle Valo > <kvalo@codeaurora.org> > Cc: ath10k@lists.infradead.org; open list:OPEN FIRMWARE AND FLATTENED > DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; linux-wireless <linux- > wireless@vger.kernel.org>; LKML <linux-kernel@vger.kernel.org> > Subject: Re: [PATCH 2/2] ath10k: Add support for chain1 regulator supply > voting > > Hi, > > On Fri, Jun 26, 2020 at 11:02 AM Rakesh Pillai <pillair@codeaurora.org> wrote: > > > > Add support to vote for chain-1 voltage regulator > > in WCN3990. > > > > Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 > > > > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> > > --- > > drivers/net/wireless/ath/ath10k/snoc.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/net/wireless/ath/ath10k/snoc.c > b/drivers/net/wireless/ath/ath10k/snoc.c > > index 645ed5f..407a074 100644 > > --- a/drivers/net/wireless/ath/ath10k/snoc.c > > +++ b/drivers/net/wireless/ath/ath10k/snoc.c > > @@ -45,6 +45,7 @@ static const char * const ath10k_regulators[] = { > > "vdd-1.8-xo", > > "vdd-1.3-rfa", > > "vdd-3.3-ch0", > > + "vdd-3.3-ch1", > > Reviewed-by: Douglas Anderson <dianders@chromium.org> > > ...with the slight nit that ${SUBJECT} and description should probably > call it "chan1" and not "chain1". Presumably the maintainer can fix > when applying. > > -Doug Hi Doug, It has to be chain1 only, not chan1. This is the power supply rail for the wlan-chain1
Hi, On Mon, Jun 29, 2020 at 5:14 AM Rakesh Pillai <pillair@codeaurora.org> wrote: > > > > > -----Original Message----- > > From: Doug Anderson <dianders@chromium.org> > > Sent: Saturday, June 27, 2020 3:22 AM > > To: Rakesh Pillai <pillair@codeaurora.org>; Kalle Valo > > <kvalo@codeaurora.org> > > Cc: ath10k@lists.infradead.org; open list:OPEN FIRMWARE AND FLATTENED > > DEVICE TREE BINDINGS <devicetree@vger.kernel.org>; linux-wireless <linux- > > wireless@vger.kernel.org>; LKML <linux-kernel@vger.kernel.org> > > Subject: Re: [PATCH 2/2] ath10k: Add support for chain1 regulator supply > > voting > > > > Hi, > > > > On Fri, Jun 26, 2020 at 11:02 AM Rakesh Pillai <pillair@codeaurora.org> wrote: > > > > > > Add support to vote for chain-1 voltage regulator > > > in WCN3990. > > > > > > Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 > > > > > > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> > > > --- > > > drivers/net/wireless/ath/ath10k/snoc.c | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/drivers/net/wireless/ath/ath10k/snoc.c > > b/drivers/net/wireless/ath/ath10k/snoc.c > > > index 645ed5f..407a074 100644 > > > --- a/drivers/net/wireless/ath/ath10k/snoc.c > > > +++ b/drivers/net/wireless/ath/ath10k/snoc.c > > > @@ -45,6 +45,7 @@ static const char * const ath10k_regulators[] = { > > > "vdd-1.8-xo", > > > "vdd-1.3-rfa", > > > "vdd-3.3-ch0", > > > + "vdd-3.3-ch1", > > > > Reviewed-by: Douglas Anderson <dianders@chromium.org> > > > > ...with the slight nit that ${SUBJECT} and description should probably > > call it "chan1" and not "chain1". Presumably the maintainer can fix > > when applying. > > > > -Doug > > Hi Doug, > > It has to be chain1 only, not chan1. > This is the power supply rail for the wlan-chain1 Whoa, really? "ch1" stands for "chain1", not "chan1"? That is seriously weird (at least to me), but I find at least one document that agrees with you. Sorry for the mistake! -Doug
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index 645ed5f..407a074 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -45,6 +45,7 @@ static const char * const ath10k_regulators[] = { "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0", + "vdd-3.3-ch1", }; static const char * const ath10k_clocks[] = {
Add support to vote for chain-1 voltage regulator in WCN3990. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> --- drivers/net/wireless/ath/ath10k/snoc.c | 1 + 1 file changed, 1 insertion(+)