| Message ID | 1597312029-32348-4-git-send-email-wgong@codeaurora.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | cbcbabb9c3950889664eb2380b71d9ac60ec5ce5 |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | ath10k: correct tx/rx bitrate for QCA6174 PCIe and SDIO | expand |
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 22b6937ac225..c4f098c4431f 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -334,6 +334,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = true, .tx_stats_over_pktlog = false, + .supports_peer_stats_info = true, }, { .id = QCA99X0_HW_2_0_DEV_VERSION,
When using QCA6174 PCI devices working in station mode, after connected to AP, tx bitrate is always '1.0 MBit/s' in output of command 'iw wlan0 station dump'. (QCA6174 SDIO devices are working fine.) After this patch, it show correct bitrate: Station c4:04:15:5d:97:22 (on wls1) inactive time: 312 ms rx bytes: 31496 rx packets: 173 tx bytes: 8625 tx packets: 46 tx retries: 0 tx failed: 0 signal: -76 [-88, -80] dBm signal avg: -75 [-82, -77] dBm tx bitrate: 39.0 MBit/s MCS 4 rx bitrate: 26.0 MBit/s MCS 3 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 1 + 1 file changed, 1 insertion(+)