| Message ID | 1630337206-12410-2-git-send-email-martin.fuzzey@flowbird.group (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 9b14ed6e11b72dd4806535449ca6c6962cb2369d |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | rsi: fix startup and P2P mode | expand |
Martin Fuzzey <martin.fuzzey@flowbird.group> wrote: > When BT coexistence is enabled (eg oper mode 13, which is the default) > the initialisation on startup sometimes silently fails. > > In a normal initialisation we see > usb 1-1.3: Product: Wireless USB Network Module > usb 1-1.3: Manufacturer: Redpine Signals, Inc. > usb 1-1.3: SerialNumber: 000000000001 > rsi_91x: rsi_probe: Initialized os intf ops > rsi_91x: rsi_load_9116_firmware: Loading chunk 0 > rsi_91x: rsi_load_9116_firmware: Loading chunk 1 > rsi_91x: rsi_load_9116_firmware: Loading chunk 2 > rsi_91x: Max Stations Allowed = 1 > > But sometimes the last log is missing and the wlan net device is > not created. > > Running a userspace loop that resets the hardware via a GPIO shows the > problem occurring ~5/100 resets. > > The problem does not occur in oper mode 1 (wifi only). > > Adding logs shows that the initialisation state machine requests a MAC > reset via rsi_send_reset_mac() but the firmware does not reply, leading > to the initialisation sequence being incomplete. > > Fix this by delaying attaching the BT adapter until the wifi > initialisation has completed. > > With this applied I have done > 300 reset loops with no errors. > > Fixes: 716b840c7641 ("rsi: handle BT traffic in driver") > Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> > CC: stable@vger.kernel.org 3 patches applied to wireless-drivers-next.git, thanks. 9b14ed6e11b7 rsi: fix occasional initialisation failure with BT coex 99ac60188212 rsi: fix key enabled check causing unwanted encryption for vap_id > 0 b515d097053a rsi: fix rate mask set leading to P2P failure
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c index d984832..143224a 100644 --- a/drivers/net/wireless/rsi/rsi_91x_main.c +++ b/drivers/net/wireless/rsi/rsi_91x_main.c @@ -211,9 +211,10 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len) bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST]; if (bt_pkt_type == BT_CARD_READY_IND) { rsi_dbg(INFO_ZONE, "BT Card ready recvd\n"); - if (rsi_bt_ops.attach(common, &g_proto_ops)) - rsi_dbg(ERR_ZONE, - "Failed to attach BT module\n"); + if (common->fsm_state == FSM_MAC_INIT_DONE) + rsi_attach_bt(common); + else + common->bt_defer_attach = true; } else { if (common->bt_adapter) rsi_bt_ops.recv_pkt(common->bt_adapter, @@ -278,6 +279,15 @@ void rsi_set_bt_context(void *priv, void *bt_context) } #endif +void rsi_attach_bt(struct rsi_common *common) +{ +#ifdef CONFIG_RSI_COEX + if (rsi_bt_ops.attach(common, &g_proto_ops)) + rsi_dbg(ERR_ZONE, + "Failed to attach BT module\n"); +#endif +} + /** * rsi_91x_init() - This function initializes os interface operations. * @oper_mode: One of DEV_OPMODE_*. diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c index 891fd5f..a25742a 100644 --- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c +++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c @@ -2071,6 +2071,9 @@ static int rsi_handle_ta_confirm_type(struct rsi_common *common, if (common->reinit_hw) { complete(&common->wlan_init_completion); } else { + if (common->bt_defer_attach) + rsi_attach_bt(common); + return rsi_mac80211_attach(common); } } diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h index 0f53585..a3e4fd5 100644 --- a/drivers/net/wireless/rsi/rsi_main.h +++ b/drivers/net/wireless/rsi/rsi_main.h @@ -320,6 +320,7 @@ struct rsi_common { struct ieee80211_vif *roc_vif; bool eapol4_confirm; + bool bt_defer_attach; void *bt_adapter; struct cfg80211_scan_request *hwscan; @@ -401,5 +402,6 @@ struct rsi_host_intf_ops { enum rsi_host_intf rsi_get_host_intf(void *priv); void rsi_set_bt_context(void *priv, void *bt_context); +void rsi_attach_bt(struct rsi_common *common); #endif
When BT coexistence is enabled (eg oper mode 13, which is the default) the initialisation on startup sometimes silently fails. In a normal initialisation we see usb 1-1.3: Product: Wireless USB Network Module usb 1-1.3: Manufacturer: Redpine Signals, Inc. usb 1-1.3: SerialNumber: 000000000001 rsi_91x: rsi_probe: Initialized os intf ops rsi_91x: rsi_load_9116_firmware: Loading chunk 0 rsi_91x: rsi_load_9116_firmware: Loading chunk 1 rsi_91x: rsi_load_9116_firmware: Loading chunk 2 rsi_91x: Max Stations Allowed = 1 But sometimes the last log is missing and the wlan net device is not created. Running a userspace loop that resets the hardware via a GPIO shows the problem occurring ~5/100 resets. The problem does not occur in oper mode 1 (wifi only). Adding logs shows that the initialisation state machine requests a MAC reset via rsi_send_reset_mac() but the firmware does not reply, leading to the initialisation sequence being incomplete. Fix this by delaying attaching the BT adapter until the wifi initialisation has completed. With this applied I have done > 300 reset loops with no errors. Fixes: 716b840c7641 ("rsi: handle BT traffic in driver") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> CC: stable@vger.kernel.org --- drivers/net/wireless/rsi/rsi_91x_main.c | 16 +++++++++++++--- drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +++ drivers/net/wireless/rsi/rsi_main.h | 2 ++ 3 files changed, 18 insertions(+), 3 deletions(-)