diff mbox series

wcn36xx: Fix packet drop on resume

Message ID 1635150496-19290-1-git-send-email-loic.poulain@linaro.org (mailing list archive)
State Accepted
Commit df0697801d8aa2eebfe7f0b7388879639f8fe7cc
Delegated to: Kalle Valo
Headers show
Series wcn36xx: Fix packet drop on resume | expand

Commit Message

Loic Poulain Oct. 25, 2021, 8:28 a.m. UTC
If the system is resumed because of an incoming packet, the wcn36xx RX
interrupts is fired before actual resuming of the wireless/mac80211
stack, causing any received packets to be simply dropped. E.g. a ping
request causes a system resume, but is dropped and so never forwarded
to the IP stack.

This change fixes that, disabling DMA interrupts on suspend to no pass
packets until mac80211 is resumed and ready to handle them.

Note that it's not incompatible with RX irq wake.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Bryan O'Donoghue Oct. 25, 2021, 8:40 a.m. UTC | #1
On 25/10/2021 09:28, Loic Poulain wrote:
> If the system is resumed because of an incoming packet, the wcn36xx RX
> interrupts is fired before actual resuming of the wireless/mac80211
> stack, causing any received packets to be simply dropped. E.g. a ping
> request causes a system resume, but is dropped and so never forwarded
> to the IP stack.
> 
> This change fixes that, disabling DMA interrupts on suspend to no pass
> packets until mac80211 is resumed and ready to handle them.
> 
> Note that it's not incompatible with RX irq wake.
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
>   drivers/net/wireless/ath/wcn36xx/main.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
> index a42eae6..a650b9e 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -1137,6 +1137,13 @@ static int wcn36xx_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wow)
>   			goto out;
>   		ret = wcn36xx_smd_wlan_host_suspend_ind(wcn);
>   	}
> +
> +	/* Disable IRQ, we don't want to handle any packet before mac80211 is
> +	 * resumed and ready to receive packets.
> +	 */
> +	disable_irq(wcn->tx_irq);
> +	disable_irq(wcn->rx_irq);
> +
>   out:
>   	mutex_unlock(&wcn->conf_mutex);
>   	return ret;
> @@ -1159,6 +1166,10 @@ static int wcn36xx_resume(struct ieee80211_hw *hw)
>   		wcn36xx_smd_ipv6_ns_offload(wcn, vif, false);
>   		wcn36xx_smd_arp_offload(wcn, vif, false);
>   	}
> +
> +	enable_irq(wcn->tx_irq);
> +	enable_irq(wcn->rx_irq);
> +
>   	mutex_unlock(&wcn->conf_mutex);
>   
>   	return 0;
> 

LGTM

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Kalle Valo Oct. 27, 2021, 7:45 a.m. UTC | #2
Loic Poulain <loic.poulain@linaro.org> wrote:

> If the system is resumed because of an incoming packet, the wcn36xx RX
> interrupts is fired before actual resuming of the wireless/mac80211
> stack, causing any received packets to be simply dropped. E.g. a ping
> request causes a system resume, but is dropped and so never forwarded
> to the IP stack.
> 
> This change fixes that, disabling DMA interrupts on suspend to no pass
> packets until mac80211 is resumed and ready to handle them.
> 
> Note that it's not incompatible with RX irq wake.
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

df0697801d8a wcn36xx: Fix packet drop on resume
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index a42eae6..a650b9e 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1137,6 +1137,13 @@  static int wcn36xx_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wow)
 			goto out;
 		ret = wcn36xx_smd_wlan_host_suspend_ind(wcn);
 	}
+
+	/* Disable IRQ, we don't want to handle any packet before mac80211 is
+	 * resumed and ready to receive packets.
+	 */
+	disable_irq(wcn->tx_irq);
+	disable_irq(wcn->rx_irq);
+
 out:
 	mutex_unlock(&wcn->conf_mutex);
 	return ret;
@@ -1159,6 +1166,10 @@  static int wcn36xx_resume(struct ieee80211_hw *hw)
 		wcn36xx_smd_ipv6_ns_offload(wcn, vif, false);
 		wcn36xx_smd_arp_offload(wcn, vif, false);
 	}
+
+	enable_irq(wcn->tx_irq);
+	enable_irq(wcn->rx_irq);
+
 	mutex_unlock(&wcn->conf_mutex);
 
 	return 0;