diff mbox series

[5/6] nl80211: add support for 320MHz channel limitation

Message ID 1640163883-12696-6-git-send-email-quic_vjakkam@quicinc.com (mailing list archive)
State Superseded
Delegated to: Johannes Berg
Headers show
Series cfg80211/nl80211: add support for EHT | expand

Commit Message

Veerendranath Jakkam Dec. 22, 2021, 9:04 a.m. UTC 
From: Sriram R <quic_srirrama@quicinc.com>

Add support to advertise drivers or regulatory limitations on 320 MHz
channels to userspace.

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-authored-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasia@quicinc.com>
Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
---
 include/uapi/linux/nl80211.h | 5 +++++
 net/wireless/nl80211.c       | 3 +++
 net/wireless/reg.c           | 6 ++++++
 3 files changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e4ac7ab..b985cb0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3942,6 +3942,8 @@  enum nl80211_wmm_rule {
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
  *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel
+ *	as the primary or any of the secondary channels isn't possible
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3978,6 +3980,7 @@  enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_4MHZ,
 	NL80211_FREQUENCY_ATTR_8MHZ,
 	NL80211_FREQUENCY_ATTR_16MHZ,
+	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4176,6 +4179,7 @@  enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
  * @NL80211_RRF_NO_HE: HE operation not allowed
+ * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4194,6 +4198,7 @@  enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_80MHZ		= 1<<15,
 	NL80211_RRF_NO_160MHZ		= 1<<16,
 	NL80211_RRF_NO_HE		= 1<<17,
+	NL80211_RRF_NO_320MHZ		= 1<<18,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index dba4002..f31a464 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1152,6 +1152,9 @@  static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy,
 		if ((chan->flags & IEEE80211_CHAN_16MHZ) &&
 		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_16MHZ))
 			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_NO_320MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_320MHZ))
+			goto nla_put_failure;
 	}
 
 	if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index ec25924..c76cd97 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1238,6 +1238,8 @@  unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd,
 {
 	unsigned int bw = reg_get_max_bandwidth_from_range(rd, rule);
 
+	if (rule->flags & NL80211_RRF_NO_320MHZ)
+		bw = min_t(unsigned int, bw, MHZ_TO_KHZ(160));
 	if (rule->flags & NL80211_RRF_NO_160MHZ)
 		bw = min_t(unsigned int, bw, MHZ_TO_KHZ(80));
 	if (rule->flags & NL80211_RRF_NO_80MHZ)
@@ -1611,6 +1613,8 @@  static u32 map_regdom_flags(u32 rd_flags)
 		channel_flags |= IEEE80211_CHAN_NO_160MHZ;
 	if (rd_flags & NL80211_RRF_NO_HE)
 		channel_flags |= IEEE80211_CHAN_NO_HE;
+	if (rd_flags & NL80211_RRF_NO_320MHZ)
+		channel_flags |= IEEE80211_CHAN_NO_320MHZ;
 	return channel_flags;
 }
 
@@ -1773,6 +1777,8 @@  static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 			bw_flags |= IEEE80211_CHAN_NO_80MHZ;
 		if (max_bandwidth_khz < MHZ_TO_KHZ(160))
 			bw_flags |= IEEE80211_CHAN_NO_160MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(320))
+			bw_flags |= IEEE80211_CHAN_NO_320MHZ;
 	}
 	return bw_flags;
 }