From patchwork Sat Jan 1 20:26:51 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stefan Wahren X-Patchwork-Id: 12702149 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 39B35C43217 for ; Sat, 1 Jan 2022 20:27:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232680AbiAAU1e (ORCPT ); Sat, 1 Jan 2022 15:27:34 -0500 Received: from mout.kundenserver.de ([212.227.17.13]:43967 "EHLO mout.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231542AbiAAU1d (ORCPT ); Sat, 1 Jan 2022 15:27:33 -0500 Received: from localhost.localdomain ([37.4.249.169]) by mrelayeu.kundenserver.de (mreue107 [212.227.15.183]) with ESMTPSA (Nemesis) id 1MK3mS-1mq4fg1juI-00LTZn; Sat, 01 Jan 2022 21:27:18 +0100 From: Stefan Wahren To: Rob Herring , Florian Fainelli , Nicolas Saenz Julienne , Arend van Spriel , Franky Lin , Hante Meuleman , Chi-hsien Lin , Wright Feng , Chung-hsien Hsu , Kalle Valo Cc: Ray Jui , Scott Branden , bcm-kernel-feedback-list@broadcom.com, Arnd Bergmann , Olof Johansson , Phil Elwell , devicetree@vger.kernel.org, soc@kernel.org, linux-arm-kernel@lists.infradead.org, linux-wireless@vger.kernel.org, brcm80211-dev-list.pdl@broadcom.com, linux-rpi-kernel@lists.infradead.org, Stefan Wahren Subject: [PATCH RFC 3/4] ARM: dts: Add Raspberry Pi Zero 2 W Date: Sat, 1 Jan 2022 21:26:51 +0100 Message-Id: <1641068812-5851-4-git-send-email-stefan.wahren@i2se.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1641068812-5851-1-git-send-email-stefan.wahren@i2se.com> References: <1641068812-5851-1-git-send-email-stefan.wahren@i2se.com> X-Provags-ID: V03:K1:Ugrnq3amehdAgqqPE2x4fooxljBnrwEoKjV2c9w9SvlkLmFrD6e KxgeYJ+EcN+8ZGBaHFFFL/dxKt5/k/IVfZuvll5uHNREtKEEnxVcQLuLcDcljb1EiKDCXV+ sN6nA4Cmw+0y7cLS6Urs6VkvdxeLyxB5AYtxGLXxdIqra4cSTkpxdieVhq7aPeW59l5j8HD 5eWYHkk22/qqlB65KFWkg== X-UI-Out-Filterresults: notjunk:1;V03:K0:3GftqFuhLOA=:CmWLUwUBkzm4jDzmS7HfDx zD+7dbhGIbefbiotjdiE4fcLXzdb/dSLDGFC6fHkl+iuYIEQE48xU/ECZLVCxQ74cmZOioMs/ tG+KdKh+9TGPpWPTdBwqgNfZZ/YbsRmHq3bq8xZqea4Ogpy4G4GycfmblkWMAGXrFLWrG+Wb9 Eamf1eoQZKCRmXzNXnoD0OMuJVqQXcfqwq1zH4hwbsZ/5u6j+lM228xxmUNLvFMEmEHbQcnpj mDSbnvT5/FmM7bJfFZvmVBAe/jXG40bhFqAL0YVGJokHRwyPYjyZDFMVHw6EIxyr1Zx0pGReI vUuJJr8TdROUtAUhqNPdpl1pEH1A7idihAQOuIlSuuH98Kr0n5DWYkdg4OHp2sApYJQbHc1sJ 5Z6WoQaOKVoJ3XGIw9cqg7xE40qucQ1CqJdY/JaIalYEzaFuO0cw8FrHQitZwaO9hjJnG7l5T ThGa45iSdkjHmjIVUXML1m449i3SSJod3IN6gzr0Eh6o7byCA+u3JLMTKeoP3epGkEb6YW8FW +5UWNo+LTUqudxFdJtFxotdfZ9nHihG5kCbi8cNnkhd/voxe6m2deCZVfdhKBBQgX1XKUCNCi cFBVUm+KRewBlQtVTtbritCiZEGysnHJVeOoiFrScSEUmz6JxiuCJ3ZwO59jCGwEy5Kv/mVJx dvI5a565RO1J6hY9VqtBbL9qNbUB85uBDC4BRDCRRAbMFJ+sJqogDufb4FLKk78TMaKkpBiCf fSiNGwbC3C9ECP0P Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org The Raspberry Pi Zero 2 W mostly bases on the Raspberry Pi Zero W with the following differences: * Broadcom BCM2710A1, quad-core 64-bit SoC @ 1 GHz * Synaptics BCM43436, 2.4GHz IEEE 802.11b/g/n wireless LAN Contrary to the Raspberry Pi 3 boards there is no GPIO expander. Signed-off-by: Stefan Wahren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts | 136 +++++++++++++++++++++++++++++ 2 files changed, 137 insertions(+) create mode 100644 arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e41eca7..3d5785a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ + bcm2837-rpi-zero-2-w.dtb \ bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts new file mode 100644 index 0000000..60e6880 --- /dev/null +++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022 Stefan Wahren + */ + +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" +#include "bcm283x-rpi-wifi-bt.dtsi" + +/ { + compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837"; + model = "Raspberry Pi Zero 2 W"; + + memory@0 { + device_type = "memory"; + reg = <0 0x20000000>; + }; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + leds { + led-act { + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&bt { + shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_N", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "CAM_GPIO0", /* GPIO40 */ + "WL_ON", /* GPIO41 */ + "BT_ON", /* GPIO42 */ + "WIFI_CLK", /* GPIO43 */ + "SDA0", /* GPIO44 */ + "SCL0", /* GPIO45 */ + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + power-domains = <&power RPI_POWER_DOMAIN_HDMI>; + status = "okay"; +}; + +&sdhci { + pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; + +&wifi_pwrseq { + reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +};