@@ -1835,6 +1835,20 @@ struct rtw_phy_cond {
#define BRANCH_ENDIF 3
};
+struct rtw_phy_cond2 {
+#ifdef __LITTLE_ENDIAN
+ u8 type_glna;
+ u8 type_gpa;
+ u8 type_alna;
+ u8 type_apa;
+#else
+ u8 type_apa;
+ u8 type_alna;
+ u8 type_gpa;
+ u8 type_glna;
+#endif
+};
+
struct rtw_fifo_conf {
/* tx fifo information */
u16 rsvd_boundary;
@@ -1916,6 +1930,7 @@ struct rtw_hal {
u8 oem_id;
u8 pkg_type;
struct rtw_phy_cond phy_cond;
+ struct rtw_phy_cond2 phy_cond2;
bool rfe_btg;
u8 ps_mode;
@@ -18,7 +18,10 @@ struct phy_cfg_pair {
};
union phy_table_tile {
- struct rtw_phy_cond cond;
+ struct {
+ struct rtw_phy_cond cond;
+ struct rtw_phy_cond2 cond2;
+ } __packed;
struct phy_cfg_pair cfg;
};
@@ -1041,7 +1044,8 @@ void rtw_phy_setup_phy_cond(struct rtw_dev *rtwdev, u32 pkg)
{
struct rtw_hal *hal = &rtwdev->hal;
struct rtw_efuse *efuse = &rtwdev->efuse;
- struct rtw_phy_cond cond = {0};
+ struct rtw_phy_cond cond = {};
+ struct rtw_phy_cond2 cond2 = {};
cond.cut = hal->cut_version ? hal->cut_version : 15;
cond.pkg = pkg ? pkg : 15;
@@ -1061,15 +1065,34 @@ void rtw_phy_setup_phy_cond(struct rtw_dev *rtwdev, u32 pkg)
break;
}
+ if (rtwdev->chip->id == RTW_CHIP_TYPE_8812A ||
+ rtwdev->chip->id == RTW_CHIP_TYPE_8821A) {
+ cond.rfe = 0;
+ cond.rfe |= efuse->ext_lna_2g;
+ cond.rfe |= efuse->ext_pa_2g << 1;
+ cond.rfe |= efuse->ext_lna_5g << 2;
+ cond.rfe |= efuse->ext_pa_5g << 3;
+ cond.rfe |= efuse->btcoex << 4;
+
+ cond2.type_alna = efuse->alna_type;
+ cond2.type_glna = efuse->glna_type;
+ cond2.type_apa = efuse->apa_type;
+ cond2.type_gpa = efuse->gpa_type;
+ }
+
hal->phy_cond = cond;
+ hal->phy_cond2 = cond2;
- rtw_dbg(rtwdev, RTW_DBG_PHY, "phy cond=0x%08x\n", *((u32 *)&hal->phy_cond));
+ rtw_dbg(rtwdev, RTW_DBG_PHY, "phy cond=0x%08x cond2=0x%08x\n",
+ *((u32 *)&hal->phy_cond), *((u32 *)&hal->phy_cond2));
}
-static bool check_positive(struct rtw_dev *rtwdev, struct rtw_phy_cond cond)
+static bool check_positive(struct rtw_dev *rtwdev, struct rtw_phy_cond cond,
+ struct rtw_phy_cond2 cond2)
{
struct rtw_hal *hal = &rtwdev->hal;
struct rtw_phy_cond drv_cond = hal->phy_cond;
+ struct rtw_phy_cond2 drv_cond2 = hal->phy_cond2;
if (cond.cut && cond.cut != drv_cond.cut)
return false;
@@ -1080,8 +1103,29 @@ static bool check_positive(struct rtw_dev *rtwdev, struct rtw_phy_cond cond)
if (cond.intf && cond.intf != drv_cond.intf)
return false;
- if (cond.rfe != drv_cond.rfe)
- return false;
+ if (rtwdev->chip->id == RTW_CHIP_TYPE_8812A ||
+ rtwdev->chip->id == RTW_CHIP_TYPE_8821A) {
+ if (!(cond.rfe & 0x0f))
+ return true;
+
+ if ((cond.rfe & drv_cond.rfe) != cond.rfe)
+ return false;
+
+ if ((cond.rfe & BIT(0)) && cond2.type_glna != drv_cond2.type_glna)
+ return false;
+
+ if ((cond.rfe & BIT(1)) && cond2.type_gpa != drv_cond2.type_gpa)
+ return false;
+
+ if ((cond.rfe & BIT(2)) && cond2.type_alna != drv_cond2.type_alna)
+ return false;
+
+ if ((cond.rfe & BIT(3)) && cond2.type_apa != drv_cond2.type_apa)
+ return false;
+ } else {
+ if (cond.rfe != drv_cond.rfe)
+ return false;
+ }
return true;
}
@@ -1090,7 +1134,8 @@ void rtw_parse_tbl_phy_cond(struct rtw_dev *rtwdev, const struct rtw_table *tbl)
{
const union phy_table_tile *p = tbl->data;
const union phy_table_tile *end = p + tbl->size / 2;
- struct rtw_phy_cond pos_cond = {0};
+ struct rtw_phy_cond pos_cond = {};
+ struct rtw_phy_cond2 pos_cond2 = {};
bool is_matched = true, is_skipped = false;
BUILD_BUG_ON(sizeof(union phy_table_tile) != sizeof(struct phy_cfg_pair));
@@ -1109,11 +1154,12 @@ void rtw_parse_tbl_phy_cond(struct rtw_dev *rtwdev, const struct rtw_table *tbl)
case BRANCH_ELIF:
default:
pos_cond = p->cond;
+ pos_cond2 = p->cond2;
break;
}
} else if (p->cond.neg) {
if (!is_skipped) {
- if (check_positive(rtwdev, pos_cond)) {
+ if (check_positive(rtwdev, pos_cond, pos_cond2)) {
is_matched = true;
is_skipped = true;
} else {
The chips supported so far only use the first condition, and so the parsing code ignores the second condition. RTL8812AU's init tables use the second condition also. Make the parsing code check it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- v2: - Initialise structs with {} instead of {0}. v3: - Check for !(cond.rfe & 0x0f) in order to reduce the indentation level. --- drivers/net/wireless/realtek/rtw88/main.h | 15 ++++++ drivers/net/wireless/realtek/rtw88/phy.c | 62 ++++++++++++++++++++--- 2 files changed, 69 insertions(+), 8 deletions(-)