@@ -1406,7 +1406,7 @@ ATHEROS ATH6KL WIRELESS DRIVER
M: Kalle Valo <kvalo@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ath6kl
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl.git
+T: git git://github.com/kvalo/ath.git
S: Supported
F: drivers/net/wireless/ath/ath6kl/
@@ -6726,6 +6726,14 @@ T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
F: drivers/media/tuners/qt1010*
+QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
+M: Kalle Valo <kvalo@qca.qualcomm.com>
+L: ath10k@lists.infradead.org
+W: http://wireless.kernel.org/en/users/Drivers/ath10k
+T: git git://github.com/kvalo/ath.git
+S: Supported
+F: drivers/net/wireless/ath/ath10k/
+
QUALCOMM HEXAGON ARCHITECTURE
M: Richard Kuo <rkuo@codeaurora.org>
L: linux-hexagon@vger.kernel.org
@@ -8270,7 +8278,7 @@ S: Maintained
F: sound/soc/codecs/twl4030*
TI WILINK WIRELESS DRIVERS
-M: Luciano Coelho <coelho@ti.com>
+M: Luciano Coelho <luca@coelho.fi>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/wl12xx
W: http://wireless.kernel.org/en/users/Drivers/wl1251
@@ -91,6 +91,10 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe04d) },
+ { USB_DEVICE(0x04c5, 0x1330) },
+ { USB_DEVICE(0x13d3, 0x3402) },
+ { USB_DEVICE(0x0cf3, 0x3121) },
+ { USB_DEVICE(0x0cf3, 0xe003) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -128,6 +132,10 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
@@ -193,24 +201,44 @@ error:
static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
{
- int pipe = 0;
+ int ret, pipe = 0;
+ char *buf;
+
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
pipe = usb_rcvctrlpipe(udev, 0);
- return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
- USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- state, 0x01, USB_CTRL_SET_TIMEOUT);
+ ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
+
+ *state = *buf;
+ kfree(buf);
+
+ return ret;
}
static int ath3k_get_version(struct usb_device *udev,
struct ath3k_version *version)
{
- int pipe = 0;
+ int ret, pipe = 0;
+ struct ath3k_version *buf;
+ const int size = sizeof(*buf);
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
pipe = usb_rcvctrlpipe(udev, 0);
- return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
- USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
- sizeof(struct ath3k_version),
- USB_CTRL_SET_TIMEOUT);
+ ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ buf, size, USB_CTRL_SET_TIMEOUT);
+
+ memcpy(version, buf, size);
+ kfree(buf);
+
+ return ret;
}
static int ath3k_load_fwfile(struct usb_device *udev,
@@ -154,6 +154,10 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -1095,7 +1099,7 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
if (IS_ERR(skb)) {
BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
hdev->name, cmd->opcode, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
/* It ensures that the returned event matches the event data read from
@@ -1147,7 +1151,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
if (IS_ERR(skb)) {
BT_ERR("%s sending initial HCI reset command failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
@@ -1161,7 +1165,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
if (IS_ERR(skb)) {
BT_ERR("%s reading Intel fw version command failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
if (skb->len != sizeof(*ver)) {
@@ -1219,7 +1223,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
release_firmware(fw);
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
if (skb->data[0]) {
@@ -1276,7 +1280,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
@@ -1292,7 +1296,7 @@ exit_mfg_disable:
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
@@ -1310,7 +1314,7 @@ exit_mfg_deactivate:
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
- return -PTR_ERR(skb);
+ return PTR_ERR(skb);
}
kfree_skb(skb);
@@ -1,6 +1,6 @@
config ATH10K
tristate "Atheros 802.11ac wireless cards support"
- depends on MAC80211
+ depends on MAC80211 && HAS_DMA
select ATH_COMMON
---help---
This module adds support for wireless adapters based on
@@ -1093,8 +1093,11 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
err = brcmf_fil_cmd_data_set(vif->ifp,
BRCMF_C_DISASSOC, NULL, 0);
- if (err)
+ if (err) {
brcmf_err("WLC_DISASSOC failed (%d)\n", err);
+ cfg80211_disconnected(vif->wdev.netdev, 0,
+ NULL, 0, GFP_KERNEL);
+ }
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state);
}
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);
@@ -97,6 +97,8 @@
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
+#define APMG_RTC_INT_STT_RFKILL (0x10000000)
+
/* Device system time */
#define DEVICE_SYSTEM_TIME_REG 0xA0206C
@@ -134,7 +134,7 @@ struct wowlan_key_data {
struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc;
struct iwl_wowlan_tkip_params_cmd *tkip;
bool error, use_rsc_tsc, use_tkip;
- int gtk_key_idx;
+ int wep_key_idx;
};
static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw,
@@ -188,8 +188,8 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw,
wkc.wep_key.key_offset = 0;
} else {
/* others start at 1 */
- data->gtk_key_idx++;
- wkc.wep_key.key_offset = data->gtk_key_idx;
+ data->wep_key_idx++;
+ wkc.wep_key.key_offset = data->wep_key_idx;
}
ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC,
@@ -316,8 +316,13 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw,
mvm->ptk_ivlen = key->iv_len;
mvm->ptk_icvlen = key->icv_len;
} else {
- data->gtk_key_idx++;
- key->hw_key_idx = data->gtk_key_idx;
+ /*
+ * firmware only supports TSC/RSC for a single key,
+ * so if there are multiple keep overwriting them
+ * with new ones -- this relies on mac80211 doing
+ * list_add_tail().
+ */
+ key->hw_key_idx = 1;
mvm->gtk_ivlen = key->iv_len;
mvm->gtk_icvlen = key->icv_len;
}
@@ -69,7 +69,6 @@
/* Scan Commands, Responses, Notifications */
/* Masks for iwl_scan_channel.type flags */
-#define SCAN_CHANNEL_TYPE_PASSIVE 0
#define SCAN_CHANNEL_TYPE_ACTIVE BIT(0)
#define SCAN_CHANNEL_NARROW_BAND BIT(22)
@@ -512,6 +512,27 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
goto out_unlock;
/*
+ * TODO: remove this temporary code.
+ * Currently MVM FW supports power management only on single MAC.
+ * If new interface added, disable PM on existing interface.
+ * P2P device is a special case, since it is handled by FW similary to
+ * scan. If P2P deviced is added, PM remains enabled on existing
+ * interface.
+ * Note: the method below does not count the new interface being added
+ * at this moment.
+ */
+ if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
+ mvm->vif_count++;
+ if (mvm->vif_count > 1) {
+ IWL_DEBUG_MAC80211(mvm,
+ "Disable power on existing interfaces\n");
+ ieee80211_iterate_active_interfaces_atomic(
+ mvm->hw,
+ IEEE80211_IFACE_ITER_NORMAL,
+ iwl_mvm_pm_disable_iterator, mvm);
+ }
+
+ /*
* The AP binding flow can be done only after the beacon
* template is configured (which happens only in the mac80211
* start_ap() flow), and adding the broadcast station can happen
@@ -534,27 +555,6 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
goto out_unlock;
}
- /*
- * TODO: remove this temporary code.
- * Currently MVM FW supports power management only on single MAC.
- * If new interface added, disable PM on existing interface.
- * P2P device is a special case, since it is handled by FW similary to
- * scan. If P2P deviced is added, PM remains enabled on existing
- * interface.
- * Note: the method below does not count the new interface being added
- * at this moment.
- */
- if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
- mvm->vif_count++;
- if (mvm->vif_count > 1) {
- IWL_DEBUG_MAC80211(mvm,
- "Disable power on existing interfaces\n");
- ieee80211_iterate_active_interfaces_atomic(
- mvm->hw,
- IEEE80211_IFACE_ITER_NORMAL,
- iwl_mvm_pm_disable_iterator, mvm);
- }
-
ret = iwl_mvm_mac_ctxt_add(mvm, vif);
if (ret)
goto out_release;
@@ -178,19 +178,12 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd,
struct iwl_scan_channel *chan = (struct iwl_scan_channel *)
(cmd->data + le16_to_cpu(cmd->tx_cmd.len));
int i;
- __le32 chan_type_value;
-
- if (req->n_ssids > 0)
- chan_type_value = cpu_to_le32(BIT(req->n_ssids) - 1);
- else
- chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE;
for (i = 0; i < cmd->channel_count; i++) {
chan->channel = cpu_to_le16(req->channels[i]->hw_value);
+ chan->type = cpu_to_le32(BIT(req->n_ssids) - 1);
if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN)
- chan->type = SCAN_CHANNEL_TYPE_PASSIVE;
- else
- chan->type = chan_type_value;
+ chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE);
chan->active_dwell = cpu_to_le16(active_dwell);
chan->passive_dwell = cpu_to_le16(passive_dwell);
chan->iteration_count = cpu_to_le16(1);
@@ -915,6 +915,7 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv;
struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
u16 txq_id;
+ enum iwl_mvm_agg_state old_state;
/*
* First set the agg state to OFF to avoid calling
@@ -924,13 +925,17 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
txq_id = tid_data->txq_id;
IWL_DEBUG_TX_QUEUES(mvm, "Flush AGG: sta %d tid %d q %d state %d\n",
mvmsta->sta_id, tid, txq_id, tid_data->state);
+ old_state = tid_data->state;
tid_data->state = IWL_AGG_OFF;
spin_unlock_bh(&mvmsta->lock);
- if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true))
- IWL_ERR(mvm, "Couldn't flush the AGG queue\n");
+ if (old_state >= IWL_AGG_ON) {
+ if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true))
+ IWL_ERR(mvm, "Couldn't flush the AGG queue\n");
+
+ iwl_trans_txq_disable(mvm->trans, tid_data->txq_id);
+ }
- iwl_trans_txq_disable(mvm->trans, tid_data->txq_id);
mvm->queue_to_mac80211[tid_data->txq_id] =
IWL_INVALID_MAC80211_QUEUE;
@@ -130,6 +130,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
+ {IWL_PCI_DEVICE(0x423C, 0x1326, iwl5150_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
@@ -888,6 +888,14 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill) {
+ /*
+ * Clear the interrupt in APMG if the NIC is going down.
+ * Note that when the NIC exits RFkill (else branch), we
+ * can't access prph and the NIC will be reset in
+ * start_hw anyway.
+ */
+ iwl_write_prph(trans, APMG_RTC_INT_STT_REG,
+ APMG_RTC_INT_STT_RFKILL);
set_bit(STATUS_RFKILL, &trans_pcie->status);
if (test_and_clear_bit(STATUS_HCMD_ACTIVE,
&trans_pcie->status))
@@ -670,6 +670,11 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
return err;
}
+ /* Reset the entire device */
+ iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+ usleep_range(10, 15);
+
iwl_pcie_apm_init(trans);
/* From now on, the op_mode will be kept updated about RF kill state */
@@ -1716,9 +1716,9 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
int ret;
- if (priv->bss_mode != NL80211_IFTYPE_STATION) {
+ if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) {
wiphy_err(wiphy,
- "%s: reject infra assoc request in non-STA mode\n",
+ "%s: reject infra assoc request in non-STA role\n",
dev->name);
return -EINVAL;
}
@@ -415,7 +415,8 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates)
u32 k = 0;
struct mwifiex_adapter *adapter = priv->adapter;
- if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+ if (priv->bss_mode == NL80211_IFTYPE_STATION ||
+ priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
switch (adapter->config_bands) {
case BAND_B:
dev_dbg(adapter->dev, "info: infra band=%d "
@@ -1291,8 +1291,10 @@ int mwifiex_associate(struct mwifiex_private *priv,
{
u8 current_bssid[ETH_ALEN];
- /* Return error if the adapter or table entry is not marked as infra */
- if ((priv->bss_mode != NL80211_IFTYPE_STATION) ||
+ /* Return error if the adapter is not STA role or table entry
+ * is not marked as infra.
+ */
+ if ((GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) ||
(bss_desc->bss_mode != NL80211_IFTYPE_STATION))
return -1;
@@ -1639,8 +1639,8 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
/* Allocate buffer and copy payload */
blk_size = MWIFIEX_SDIO_BLOCK_SIZE;
buf_block_len = (pkt_len + blk_size - 1) / blk_size;
- *(u16 *) &payload[0] = (u16) pkt_len;
- *(u16 *) &payload[2] = type;
+ *(__le16 *)&payload[0] = cpu_to_le16((u16)pkt_len);
+ *(__le16 *)&payload[2] = cpu_to_le16(type);
/*
* This is SDIO specific header
@@ -257,10 +257,10 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
goto done;
}
- if (priv->bss_mode == NL80211_IFTYPE_STATION) {
+ if (priv->bss_mode == NL80211_IFTYPE_STATION ||
+ priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
u8 config_bands;
- /* Infra mode */
ret = mwifiex_deauthenticate(priv, NULL);
if (ret)
goto done;
@@ -936,13 +936,8 @@ void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index)
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
-void rt2x00queue_pause_queue(struct data_queue *queue)
+void rt2x00queue_pause_queue_nocheck(struct data_queue *queue)
{
- if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
- !test_bit(QUEUE_STARTED, &queue->flags) ||
- test_and_set_bit(QUEUE_PAUSED, &queue->flags))
- return;
-
switch (queue->qid) {
case QID_AC_VO:
case QID_AC_VI:
@@ -958,6 +953,15 @@ void rt2x00queue_pause_queue(struct data_queue *queue)
break;
}
}
+void rt2x00queue_pause_queue(struct data_queue *queue)
+{
+ if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+ !test_bit(QUEUE_STARTED, &queue->flags) ||
+ test_and_set_bit(QUEUE_PAUSED, &queue->flags))
+ return;
+
+ rt2x00queue_pause_queue_nocheck(queue);
+}
EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue);
void rt2x00queue_unpause_queue(struct data_queue *queue)
@@ -1019,7 +1023,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue)
return;
}
- rt2x00queue_pause_queue(queue);
+ rt2x00queue_pause_queue_nocheck(queue);
queue->rt2x00dev->ops->lib->stop_queue(queue);
@@ -59,7 +59,7 @@ struct nfc_hci_ops {
struct nfc_target *target);
int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event,
struct sk_buff *skb);
- int (*fw_upload)(struct nfc_hci_dev *hdev, const char *firmware_name);
+ int (*fw_download)(struct nfc_hci_dev *hdev, const char *firmware_name);
int (*discover_se)(struct nfc_hci_dev *dev);
int (*enable_se)(struct nfc_hci_dev *dev, u32 se_idx);
int (*disable_se)(struct nfc_hci_dev *dev, u32 se_idx);
@@ -68,7 +68,7 @@ struct nfc_ops {
void *cb_context);
int (*tm_send)(struct nfc_dev *dev, struct sk_buff *skb);
int (*check_presence)(struct nfc_dev *dev, struct nfc_target *target);
- int (*fw_upload)(struct nfc_dev *dev, const char *firmware_name);
+ int (*fw_download)(struct nfc_dev *dev, const char *firmware_name);
/* Secure Element API */
int (*discover_se)(struct nfc_dev *dev);
@@ -127,7 +127,7 @@ struct nfc_dev {
int targets_generation;
struct device dev;
bool dev_up;
- bool fw_upload_in_progress;
+ bool fw_download_in_progress;
u8 rf_mode;
bool polling;
struct nfc_target *active_target;
@@ -69,8 +69,8 @@
* starting a poll from a device which has a secure element enabled means
* we want to do SE based card emulation.
* @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element.
- * @NFC_CMD_FW_UPLOAD: Request to Load/flash firmware, or event to inform that
- * some firmware was loaded
+ * @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform
+ * that some firmware was loaded
*/
enum nfc_commands {
NFC_CMD_UNSPEC,
@@ -94,7 +94,7 @@ enum nfc_commands {
NFC_CMD_DISABLE_SE,
NFC_CMD_LLC_SDREQ,
NFC_EVENT_LLC_SDRES,
- NFC_CMD_FW_UPLOAD,
+ NFC_CMD_FW_DOWNLOAD,
NFC_EVENT_SE_ADDED,
NFC_EVENT_SE_REMOVED,
/* private: internal use only */
@@ -513,7 +513,10 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt)
hci_setup_event_mask(req);
- if (hdev->hci_ver > BLUETOOTH_VER_1_1)
+ /* AVM Berlin (31), aka "BlueFRITZ!", doesn't support the read
+ * local supported commands HCI command.
+ */
+ if (hdev->manufacturer != 31 && hdev->hci_ver > BLUETOOTH_VER_1_1)
hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
if (lmp_ssp_capable(hdev)) {
@@ -2165,10 +2168,6 @@ int hci_register_dev(struct hci_dev *hdev)
BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
- write_lock(&hci_dev_list_lock);
- list_add(&hdev->list, &hci_dev_list);
- write_unlock(&hci_dev_list_lock);
-
hdev->workqueue = alloc_workqueue("%s", WQ_HIGHPRI | WQ_UNBOUND |
WQ_MEM_RECLAIM, 1, hdev->name);
if (!hdev->workqueue) {
@@ -2203,6 +2202,10 @@ int hci_register_dev(struct hci_dev *hdev)
if (hdev->dev_type != HCI_AMP)
set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
+ write_lock(&hci_dev_list_lock);
+ list_add(&hdev->list, &hci_dev_list);
+ write_unlock(&hci_dev_list_lock);
+
hci_notify(hdev, HCI_DEV_REG);
hci_dev_hold(hdev);
@@ -2215,9 +2218,6 @@ err_wqueue:
destroy_workqueue(hdev->req_workqueue);
err:
ida_simple_remove(&hci_index_ida, hdev->id);
- write_lock(&hci_dev_list_lock);
- list_del(&hdev->list);
- write_unlock(&hci_dev_list_lock);
return error;
}
@@ -3399,8 +3399,16 @@ void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status)
*/
if (hdev->sent_cmd) {
req_complete = bt_cb(hdev->sent_cmd)->req.complete;
- if (req_complete)
+
+ if (req_complete) {
+ /* We must set the complete callback to NULL to
+ * avoid calling the callback more than once if
+ * this function gets called again.
+ */
+ bt_cb(hdev->sent_cmd)->req.complete = NULL;
+
goto call_complete;
+ }
}
/* Remove all pending commands belonging to this request */
@@ -229,6 +229,10 @@ void ieee80211_mps_sta_status_update(struct sta_info *sta)
enum nl80211_mesh_power_mode pm;
bool do_buffer;
+ /* For non-assoc STA, prevent buffering or frame transmission */
+ if (sta->sta_state < IEEE80211_STA_ASSOC)
+ return;
+
/*
* use peer-specific power mode if peering is established and the
* peer's power mode is known
@@ -99,10 +99,13 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
}
mutex_unlock(&local->sta_mtx);
- /* remove all interfaces */
+ /* remove all interfaces that were created in the driver */
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
+ if (!ieee80211_sdata_running(sdata) ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+ sdata->vif.type == NL80211_IFTYPE_MONITOR)
continue;
+
drv_remove_interface(local, sdata);
}
@@ -44,7 +44,7 @@ DEFINE_MUTEX(nfc_devlist_mutex);
/* NFC device ID bitmap */
static DEFINE_IDA(nfc_index_ida);
-int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name)
+int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name)
{
int rc = 0;
@@ -62,28 +62,28 @@ int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name)
goto error;
}
- if (!dev->ops->fw_upload) {
+ if (!dev->ops->fw_download) {
rc = -EOPNOTSUPP;
goto error;
}
- dev->fw_upload_in_progress = true;
- rc = dev->ops->fw_upload(dev, firmware_name);
+ dev->fw_download_in_progress = true;
+ rc = dev->ops->fw_download(dev, firmware_name);
if (rc)
- dev->fw_upload_in_progress = false;
+ dev->fw_download_in_progress = false;
error:
device_unlock(&dev->dev);
return rc;
}
-int nfc_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
+int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name)
{
- dev->fw_upload_in_progress = false;
+ dev->fw_download_in_progress = false;
- return nfc_genl_fw_upload_done(dev, firmware_name);
+ return nfc_genl_fw_download_done(dev, firmware_name);
}
-EXPORT_SYMBOL(nfc_fw_upload_done);
+EXPORT_SYMBOL(nfc_fw_download_done);
/**
* nfc_dev_up - turn on the NFC device
@@ -110,7 +110,7 @@ int nfc_dev_up(struct nfc_dev *dev)
goto error;
}
- if (dev->fw_upload_in_progress) {
+ if (dev->fw_download_in_progress) {
rc = -EBUSY;
goto error;
}
@@ -809,14 +809,14 @@ static void nfc_hci_recv_from_llc(struct nfc_hci_dev *hdev, struct sk_buff *skb)
}
}
-static int hci_fw_upload(struct nfc_dev *nfc_dev, const char *firmware_name)
+static int hci_fw_download(struct nfc_dev *nfc_dev, const char *firmware_name)
{
struct nfc_hci_dev *hdev = nfc_get_drvdata(nfc_dev);
- if (!hdev->ops->fw_upload)
+ if (!hdev->ops->fw_download)
return -ENOTSUPP;
- return hdev->ops->fw_upload(hdev, firmware_name);
+ return hdev->ops->fw_download(hdev, firmware_name);
}
static struct nfc_ops hci_nfc_ops = {
@@ -831,7 +831,7 @@ static struct nfc_ops hci_nfc_ops = {
.im_transceive = hci_transceive,
.tm_send = hci_tm_send,
.check_presence = hci_check_presence,
- .fw_upload = hci_fw_upload,
+ .fw_download = hci_fw_download,
.discover_se = hci_discover_se,
.enable_se = hci_enable_se,
.disable_se = hci_disable_se,
@@ -11,6 +11,7 @@ config NFC_NCI
config NFC_NCI_SPI
depends on NFC_NCI && SPI
+ select CRC_CCITT
bool "NCI over SPI protocol support"
default n
help
@@ -1089,7 +1089,7 @@ exit:
return rc;
}
-static int nfc_genl_fw_upload(struct sk_buff *skb, struct genl_info *info)
+static int nfc_genl_fw_download(struct sk_buff *skb, struct genl_info *info)
{
struct nfc_dev *dev;
int rc;
@@ -1108,13 +1108,13 @@ static int nfc_genl_fw_upload(struct sk_buff *skb, struct genl_info *info)
nla_strlcpy(firmware_name, info->attrs[NFC_ATTR_FIRMWARE_NAME],
sizeof(firmware_name));
- rc = nfc_fw_upload(dev, firmware_name);
+ rc = nfc_fw_download(dev, firmware_name);
nfc_put_device(dev);
return rc;
}
-int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
+int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name)
{
struct sk_buff *msg;
void *hdr;
@@ -1124,7 +1124,7 @@ int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
return -ENOMEM;
hdr = genlmsg_put(msg, 0, 0, &nfc_genl_family, 0,
- NFC_CMD_FW_UPLOAD);
+ NFC_CMD_FW_DOWNLOAD);
if (!hdr)
goto free_msg;
@@ -1251,8 +1251,8 @@ static struct genl_ops nfc_genl_ops[] = {
.policy = nfc_genl_policy,
},
{
- .cmd = NFC_CMD_FW_UPLOAD,
- .doit = nfc_genl_fw_upload,
+ .cmd = NFC_CMD_FW_DOWNLOAD,
+ .doit = nfc_genl_fw_download,
.policy = nfc_genl_policy,
},
{
@@ -123,10 +123,10 @@ static inline void nfc_device_iter_exit(struct class_dev_iter *iter)
class_dev_iter_exit(iter);
}
-int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name);
-int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name);
+int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name);
+int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name);
-int nfc_fw_upload_done(struct nfc_dev *dev, const char *firmware_name);
+int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name);
int nfc_dev_up(struct nfc_dev *dev);
@@ -2247,10 +2247,13 @@ int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env)
void wiphy_regulatory_register(struct wiphy *wiphy)
{
+ struct regulatory_request *lr;
+
if (!reg_dev_ignore_cell_hint(wiphy))
reg_num_devs_support_basehint++;
- wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
+ lr = get_last_request();
+ wiphy_update_regulatory(wiphy, lr->initiator);
}
void wiphy_regulatory_deregister(struct wiphy *wiphy)
Dave, This pull request is intended for the 3.11 stream. It is a bit larger than usual, as it includes pulls from most of my feeder trees as well... For the Bluetooth bits, Gustavo says: "A few fixes and devices ID additions for 3.11: * There are 4 new ath3k device ids * Fixed stack memory usage in ath3k. * Fixed the init process of BlueFRITZ! devices, they were failing to init due to an unsupported command we sent. * Fixed wrong use of PTR_ERR in btusb code that was preventing intel devices to work properly. * Fixed race condition between hci_register_dev() and hci_dev_open() that could cause a NULL pointer dereference. * Fixed race condition that could call hci_req_cmd_complete() and make some devices to fail as showed in the log added to the commit message." Regarding the NFC bits, Samuel says: "We have: 1) A build failure fix for the NCI SPI transport layer due to a missing CRC_CCITT Kconfig dependency. 2) A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11 merge window but the typical terminology for loading a firmware to a target is firmware download rather than upload. In order to avoid any confusion in a file exported to userspace, we rename this command to CMD_FW_DOWNLOAD." Samuel's item #2 isn't strictly a fix, but it seems safe and should avoid confusion in the future. As for the mac80211 bits, Johannes says: "I only have three fixes this time, a fix for a suspend regression, a patch correcting the initiator in regulatory code and one fix for mesh station powersave." With respect to the iwlwifi bits, Johannes says: "We have a scan fix for passive channels, a new PCI device ID for an old device, a NIC reset fix, an RF-Kill fix, a fix for powersave when GO interfaces are present as well as an aggregation session fix (for a corner case) and a workaround for a firmware design issue - it only supports a single GTK in D3." Bringing-up the rear with the Atheros trees, Kalle says: "Geert Uytterhoeven fixed an ath10k build problem when NO_DMA=y. I added a missing MAINTAINERS entry for ath10k and updated ath6kl git tree location." Along with the above... Arend van Spriel fixes a brcmfmac WARNING when unplugging the device. Avinash Patil proves a couple of minor mwifiex fixes relating to P2P mode. Luciano Coelho updates the MAINTAINERS entry for the wilink drivers. Stanislaw Gruszka brings an rt2x00 fix for a queue start/stop problem. Stone Piao fixes another mwifiex problem, a command timeout related to P2P mode. Tomasz Mo? corrects an endian problem in mwifiex. I'll remind my feeder maintainers to slowdown the patchflow. Beyond that, please let me know if there are problems! Thanks, John --- The following changes since commit b00589af3b04736376f24625ab0b394642e89e29: bridge: disable snooping if there is no querier (2013-07-31 17:40:21 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem for you to fetch changes up to 22e02a0272e5291a40ca28d2b7aea5231c832077: Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2013-08-01 14:30:59 -0400) ---------------------------------------------------------------- AceLan Kao (2): Bluetooth: Add support for Atheros [0cf3:3121] Bluetooth: Add support for Atheros [0cf3:e003] Adam Lee (1): Bluetooth: fix wrong use of PTR_ERR() in btusb Arend van Spriel (1): brcmfmac: inform cfg80211 about disconnect when device is unplugged Arik Nemtsov (1): regulatory: use correct regulatory initiator on wiphy register Avinash Patil (2): mwifiex: check for bss_role instead of bss_mode for STA operations mwifiex: fix wrong data rates in P2P client Chun-Yeow Yeoh (1): mac80211: prevent the buffering or frame transmission to non-assoc mesh STA David Spinadel (1): iwlwifi: mvm: set SSID bits for passive channels Emmanuel Grumbach (3): iwlwifi: add DELL SKU for 5150 HMC iwlwifi: pcie: reset the NIC before the bring up iwlwifi: pcie: clear RFKILL interrupt in AMPG Frederic Danis (1): NFC: Fix NCI over SPI build Geert Uytterhoeven (1): ath10k: ATH10K should depend on HAS_DMA Gustavo Padovan (1): Bluetooth: Fix race between hci_register_dev() and hci_dev_open() Ilan Peer (1): iwlwifi: mvm: Disable managed PS when GO is added Jaganath Kanakkassery (1): Bluetooth: Fix invalid length check in l2cap_information_rsp() Johan Hedberg (2): Bluetooth: Fix HCI init for BlueFRITZ! devices Bluetooth: Fix calling request callback more than once Johannes Berg (2): iwlwifi: mvm: use only a single GTK in D3 iwlwifi: mvm: fix flushing not started aggregation sessions John W. Linville (6): Merge branch 'for-linville-current' of git://github.com/kvalo/ath Merge branch 'for-john' of git://git.kernel.org/.../iwlwifi/iwlwifi-fixes Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211 Merge branch 'master' of git://git.kernel.org/.../bluetooth/bluetooth Merge tag 'nfc-fixes-3.11-2' of git://git.kernel.org/.../sameo/nfc-fixes Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem Kalle Valo (2): MAINTAINERS: add ath10k MAINTAINERS: update ath6kl git location Luciano Coelho (1): MAINTAINERS: change email of TI WiLink drivers' maintainer Samuel Ortiz (1): NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD Stanislaw Gruszka (3): mac80211: fix monitor interface suspend crash regression Bluetooth: ath3k: don't use stack memory for DMA rt2x00: fix stop queue Stone Piao (1): mwifiex: fix command 0x2c timeout during p2p_find or p2p_connect Sujith Manoharan (1): Bluetooth: ath3k: Add support for ID 0x13d3/0x3402 Thomas Loo (1): Bluetooth: ath3k: Add support for Fujitsu Lifebook UH5x2 [04c5:1330] Tomasz Mo? (1): mwifiex: Add missing endian conversion. MAINTAINERS | 12 +++++- drivers/bluetooth/ath3k.c | 46 +++++++++++++++++----- drivers/bluetooth/btusb.c | 18 +++++---- drivers/net/wireless/ath/ath10k/Kconfig | 2 +- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 5 ++- drivers/net/wireless/iwlwifi/iwl-prph.h | 2 + drivers/net/wireless/iwlwifi/mvm/d3.c | 15 ++++--- drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 1 - drivers/net/wireless/iwlwifi/mvm/mac80211.c | 42 ++++++++++---------- drivers/net/wireless/iwlwifi/mvm/scan.c | 11 +----- drivers/net/wireless/iwlwifi/mvm/sta.c | 11 ++++-- drivers/net/wireless/iwlwifi/pcie/drv.c | 1 + drivers/net/wireless/iwlwifi/pcie/rx.c | 8 ++++ drivers/net/wireless/iwlwifi/pcie/trans.c | 5 +++ drivers/net/wireless/mwifiex/cfg80211.c | 4 +- drivers/net/wireless/mwifiex/cfp.c | 3 +- drivers/net/wireless/mwifiex/join.c | 6 ++- drivers/net/wireless/mwifiex/sdio.c | 4 +- drivers/net/wireless/mwifiex/sta_ioctl.c | 4 +- drivers/net/wireless/rt2x00/rt2x00queue.c | 18 +++++---- include/net/nfc/hci.h | 2 +- include/net/nfc/nfc.h | 4 +- include/uapi/linux/nfc.h | 6 +-- net/bluetooth/hci_core.c | 26 +++++++----- net/mac80211/mesh_ps.c | 4 ++ net/mac80211/pm.c | 7 +++- net/nfc/core.c | 20 +++++----- net/nfc/hci/core.c | 8 ++-- net/nfc/nci/Kconfig | 1 + net/nfc/netlink.c | 12 +++--- net/nfc/nfc.h | 6 +-- net/wireless/reg.c | 5 ++- 32 files changed, 203 insertions(+), 116 deletions(-)