@@ -193,9 +193,10 @@ static int ath3k_load_firmware(struct usb_device *udev,
sent += 20;
count -= 20;
+ pipe = usb_sndbulkpipe(udev, 0x02);
+
while (count) {
size = min_t(uint, count, BULK_SIZE);
- pipe = usb_sndbulkpipe(udev, 0x02);
memcpy(send_buf, firmware->data + sent, size);
err = usb_bulk_msg(udev, pipe, send_buf, size,
@@ -1429,6 +1429,8 @@ static int at76_startup_device(struct at76_priv *priv)
/* remove BSSID from previous run */
memset(priv->bssid, 0, ETH_ALEN);
+ priv->scanning = false;
+
if (at76_set_radio(priv, 1) == 1)
at76_wait_completion(priv, CMD_RADIO_ON);
@@ -1502,6 +1504,52 @@ static void at76_work_submit_rx(struct work_struct *work)
mutex_unlock(&priv->mtx);
}
+/* This is a workaround to make scan working:
+ * currently mac80211 does not process frames with no frequency
+ * information.
+ * However during scan the HW performs a sweep by itself, and we
+ * are unable to know where the radio is actually tuned.
+ * This function tries to do its best to guess this information..
+ * During scan, If the current frame is a beacon or a probe response,
+ * the channel information is extracted from it.
+ * When not scanning, for other frames, or if it happens that for
+ * whatever reason we fail to parse beacons and probe responses, this
+ * function returns the priv->channel information, that should be correct
+ * at least when we are not scanning.
+ */
+static inline int at76_guess_freq(struct at76_priv *priv)
+{
+ size_t el_off;
+ const u8 *el;
+ int channel = priv->channel;
+ int len = priv->rx_skb->len;
+ struct ieee80211_hdr *hdr = (void *)priv->rx_skb->data;
+
+ if (!priv->scanning)
+ goto exit;
+
+ if (len < 24)
+ goto exit;
+
+ if (ieee80211_is_probe_resp(hdr->frame_control)) {
+ el_off = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
+ el = ((struct ieee80211_mgmt *)hdr)->u.probe_resp.variable;
+ } else if (ieee80211_is_beacon(hdr->frame_control)) {
+ el_off = offsetof(struct ieee80211_mgmt, u.beacon.variable);
+ el = ((struct ieee80211_mgmt *)hdr)->u.beacon.variable;
+ } else {
+ goto exit;
+ }
+ len -= el_off;
+
+ el = cfg80211_find_ie(WLAN_EID_DS_PARAMS, el, len);
+ if (el && el[1] > 0)
+ channel = el[2];
+
+exit:
+ return ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ);
+}
+
static void at76_rx_tasklet(unsigned long param)
{
struct urb *urb = (struct urb *)param;
@@ -1542,6 +1590,8 @@ static void at76_rx_tasklet(unsigned long param)
rx_status.signal = buf->rssi;
rx_status.flag |= RX_FLAG_DECRYPTED;
rx_status.flag |= RX_FLAG_IV_STRIPPED;
+ rx_status.band = IEEE80211_BAND_2GHZ;
+ rx_status.freq = at76_guess_freq(priv);
at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
priv->rx_skb->len, priv->rx_skb->data_len);
@@ -1894,6 +1944,8 @@ static void at76_dwork_hw_scan(struct work_struct *work)
if (is_valid_ether_addr(priv->bssid))
at76_join(priv);
+ priv->scanning = false;
+
mutex_unlock(&priv->mtx);
ieee80211_scan_completed(priv->hw, false);
@@ -1948,6 +2000,7 @@ static int at76_hw_scan(struct ieee80211_hw *hw,
goto exit;
}
+ priv->scanning = true;
ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
SCAN_POLL_INTERVAL);
@@ -418,6 +418,7 @@ struct at76_priv {
int scan_max_time; /* scan max channel time */
int scan_mode; /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */
int scan_need_any; /* if set, need to scan for any ESSID */
+ bool scanning; /* if set, the scan is running */
u16 assoc_id; /* current association ID, if associated */
@@ -420,12 +420,18 @@ static int conn_send(struct l2cap_conn *conn,
return 0;
}
-static void get_dest_bdaddr(struct in6_addr *ip6_daddr,
- bdaddr_t *addr, u8 *addr_type)
+static u8 get_addr_type_from_eui64(u8 byte)
{
- u8 *eui64;
+ /* Is universal(0) or local(1) bit, */
+ if (byte & 0x02)
+ return ADDR_LE_DEV_RANDOM;
- eui64 = ip6_daddr->s6_addr + 8;
+ return ADDR_LE_DEV_PUBLIC;
+}
+
+static void copy_to_bdaddr(struct in6_addr *ip6_daddr, bdaddr_t *addr)
+{
+ u8 *eui64 = ip6_daddr->s6_addr + 8;
addr->b[0] = eui64[7];
addr->b[1] = eui64[6];
@@ -433,16 +439,19 @@ static void get_dest_bdaddr(struct in6_addr *ip6_daddr,
addr->b[3] = eui64[2];
addr->b[4] = eui64[1];
addr->b[5] = eui64[0];
+}
- addr->b[5] ^= 2;
+static void convert_dest_bdaddr(struct in6_addr *ip6_daddr,
+ bdaddr_t *addr, u8 *addr_type)
+{
+ copy_to_bdaddr(ip6_daddr, addr);
- /* Set universal/local bit to 0 */
- if (addr->b[5] & 1) {
- addr->b[5] &= ~1;
- *addr_type = ADDR_LE_DEV_PUBLIC;
- } else {
- *addr_type = ADDR_LE_DEV_RANDOM;
- }
+ /* We need to toggle the U/L bit that we got from IPv6 address
+ * so that we get the proper address and type of the BD address.
+ */
+ addr->b[5] ^= 0x02;
+
+ *addr_type = get_addr_type_from_eui64(addr->b[5]);
}
static int header_create(struct sk_buff *skb, struct net_device *netdev,
@@ -473,9 +482,11 @@ static int header_create(struct sk_buff *skb, struct net_device *netdev,
/* Get destination BT device from skb.
* If there is no such peer then discard the packet.
*/
- get_dest_bdaddr(&hdr->daddr, &addr, &addr_type);
+ convert_dest_bdaddr(&hdr->daddr, &addr, &addr_type);
- BT_DBG("dest addr %pMR type %d", &addr, addr_type);
+ BT_DBG("dest addr %pMR type %s IP %pI6c", &addr,
+ addr_type == ADDR_LE_DEV_PUBLIC ? "PUBLIC" : "RANDOM",
+ &hdr->daddr);
read_lock_irqsave(&devices_lock, flags);
peer = peer_lookup_ba(dev, &addr, addr_type);
@@ -556,7 +567,7 @@ static netdev_tx_t bt_xmit(struct sk_buff *skb, struct net_device *netdev)
} else {
unsigned long flags;
- get_dest_bdaddr(&lowpan_cb(skb)->addr, &addr, &addr_type);
+ convert_dest_bdaddr(&lowpan_cb(skb)->addr, &addr, &addr_type);
eui64_addr = lowpan_cb(skb)->addr.s6_addr + 8;
dev = lowpan_dev(netdev);
@@ -564,8 +575,10 @@ static netdev_tx_t bt_xmit(struct sk_buff *skb, struct net_device *netdev)
peer = peer_lookup_ba(dev, &addr, addr_type);
read_unlock_irqrestore(&devices_lock, flags);
- BT_DBG("xmit from %s to %pMR (%pI6c) peer %p", netdev->name,
- &addr, &lowpan_cb(skb)->addr, peer);
+ BT_DBG("xmit %s to %pMR type %s IP %pI6c peer %p",
+ netdev->name, &addr,
+ addr_type == ADDR_LE_DEV_PUBLIC ? "PUBLIC" : "RANDOM",
+ &lowpan_cb(skb)->addr, peer);
if (peer && peer->conn)
err = send_pkt(peer->conn, netdev->dev_addr,
@@ -620,13 +633,13 @@ static void set_addr(u8 *eui, u8 *addr, u8 addr_type)
eui[6] = addr[1];
eui[7] = addr[0];
- eui[0] ^= 2;
-
- /* Universal/local bit set, RFC 4291 */
+ /* Universal/local bit set, BT 6lowpan draft ch. 3.2.1 */
if (addr_type == ADDR_LE_DEV_PUBLIC)
- eui[0] |= 1;
+ eui[0] &= ~0x02;
else
- eui[0] &= ~1;
+ eui[0] |= 0x02;
+
+ BT_DBG("type %d addr %*phC", addr_type, 8, eui);
}
static void set_dev_addr(struct net_device *netdev, bdaddr_t *addr,
@@ -634,7 +647,6 @@ static void set_dev_addr(struct net_device *netdev, bdaddr_t *addr,
{
netdev->addr_assign_type = NET_ADDR_PERM;
set_addr(netdev->dev_addr, addr->b, addr_type);
- netdev->dev_addr[0] ^= 2;
}
static void ifup(struct net_device *netdev)
@@ -684,13 +696,6 @@ static int add_peer_conn(struct l2cap_conn *conn, struct lowpan_dev *dev)
memcpy(&peer->eui64_addr, (u8 *)&peer->peer_addr.s6_addr + 8,
EUI64_ADDR_LEN);
- peer->eui64_addr[0] ^= 2; /* second bit-flip (Universe/Local)
- * is done according RFC2464
- */
-
- raw_dump_inline(__func__, "peer IPv6 address",
- (unsigned char *)&peer->peer_addr, 16);
- raw_dump_inline(__func__, "peer EUI64 address", peer->eui64_addr, 8);
write_lock_irqsave(&devices_lock, flags);
INIT_LIST_HEAD(&peer->list);
@@ -1453,6 +1453,7 @@ static int hci_outgoing_auth_needed(struct hci_dev *hdev,
* is requested.
*/
if (!hci_conn_ssp_enabled(conn) && !(conn->auth_type & 0x01) &&
+ conn->pending_sec_level != BT_SECURITY_FIPS &&
conn->pending_sec_level != BT_SECURITY_HIGH &&
conn->pending_sec_level != BT_SECURITY_MEDIUM)
return 0;
@@ -3076,7 +3077,8 @@ static void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
}
if (key->type == HCI_LK_COMBINATION && key->pin_len < 16 &&
- conn->pending_sec_level == BT_SECURITY_HIGH) {
+ (conn->pending_sec_level == BT_SECURITY_HIGH ||
+ conn->pending_sec_level == BT_SECURITY_FIPS)) {
BT_DBG("%s ignoring key unauthenticated for high security",
hdev->name);
goto not_found;
@@ -471,8 +471,14 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
chan->max_tx = L2CAP_DEFAULT_MAX_TX;
chan->tx_win = L2CAP_DEFAULT_TX_WINDOW;
chan->tx_win_max = L2CAP_DEFAULT_TX_WINDOW;
+ chan->remote_max_tx = chan->max_tx;
+ chan->remote_tx_win = chan->tx_win;
chan->ack_win = L2CAP_DEFAULT_TX_WINDOW;
chan->sec_level = BT_SECURITY_LOW;
+ chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
+ chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
+ chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
+ chan->conf_state = 0;
set_bit(FLAG_FORCE_ACTIVE, &chan->flags);
}
@@ -1180,13 +1180,16 @@ static struct l2cap_chan *l2cap_sock_new_connection_cb(struct l2cap_chan *chan)
/* Check for backlog size */
if (sk_acceptq_is_full(parent)) {
BT_DBG("backlog full %d", parent->sk_ack_backlog);
+ release_sock(parent);
return NULL;
}
sk = l2cap_sock_alloc(sock_net(parent), NULL, BTPROTO_L2CAP,
GFP_ATOMIC);
- if (!sk)
+ if (!sk) {
+ release_sock(parent);
return NULL;
+ }
bt_sock_reclassify_lock(sk, BTPROTO_L2CAP);
@@ -4546,10 +4546,16 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev,
else
type = HCI_SMP_LTK_SLAVE;
- if (key->type == MGMT_LTK_UNAUTHENTICATED)
+ switch (key->type) {
+ case MGMT_LTK_UNAUTHENTICATED:
authenticated = 0x00;
- else
+ break;
+ case MGMT_LTK_AUTHENTICATED:
authenticated = 0x01;
+ break;
+ default:
+ continue;
+ }
hci_add_ltk(hdev, &key->addr.bdaddr, addr_type, type,
authenticated, key->val, key->enc_size, key->ediv,
@@ -909,10 +909,11 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
authreq = seclevel_to_authreq(sec_level);
- /* hcon->auth_type is set by pair_device in mgmt.c. If the MITM
- * flag is set we should also set it for the SMP request.
+ /* Require MITM if IO Capability allows or the security level
+ * requires it.
*/
- if ((hcon->auth_type & 0x01))
+ if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
+ sec_level > BT_SECURITY_MEDIUM)
authreq |= SMP_AUTH_MITM;
if (hcon->link_mode & HCI_LM_MASTER) {