@@ -978,7 +978,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
struct ath_hw *ah = common->ah;
struct ath_htc_rx_status *rxstatus;
struct ath_rx_status rx_stats;
- bool decrypt_error;
+ bool decrypt_error = false;
if (skb->len < HTC_RX_FRAME_HEADER_SIZE) {
ath_err(common, "Corrupted RX frame, dropping (len: %d)\n",
@@ -27,10 +27,17 @@ config BRCMFMAC
one of the bus interface support. If you choose to build a module,
it'll be called brcmfmac.ko.
+config BRCMFMAC_PROTO_BCDC
+ bool
+
+config BRCMFMAC_PROTO_MSGBUF
+ bool
+
config BRCMFMAC_SDIO
bool "SDIO bus interface support for FullMAC driver"
depends on (MMC = y || MMC = BRCMFMAC)
depends on BRCMFMAC
+ select BRCMFMAC_PROTO_BCDC
select FW_LOADER
default y
---help---
@@ -42,6 +49,7 @@ config BRCMFMAC_USB
bool "USB bus interface support for FullMAC driver"
depends on (USB = y || USB = BRCMFMAC)
depends on BRCMFMAC
+ select BRCMFMAC_PROTO_BCDC
select FW_LOADER
---help---
This option enables the USB bus interface support for Broadcom
@@ -52,6 +60,8 @@ config BRCMFMAC_PCIE
bool "PCIE bus interface support for FullMAC driver"
depends on BRCMFMAC
depends on PCI
+ depends on HAS_DMA
+ select BRCMFMAC_PROTO_MSGBUF
select FW_LOADER
---help---
This option enables the PCIE bus interface support for Broadcom
@@ -30,16 +30,18 @@ brcmfmac-objs += \
fwsignal.o \
p2p.o \
proto.o \
- bcdc.o \
- commonring.o \
- flowring.o \
- msgbuf.o \
dhd_common.o \
dhd_linux.o \
firmware.o \
feature.o \
btcoex.o \
vendor.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_BCDC) += \
+ bcdc.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_MSGBUF) += \
+ commonring.o \
+ flowring.o \
+ msgbuf.o
brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
dhd_sdio.o \
bcmsdh.o
@@ -16,9 +16,12 @@
#ifndef BRCMFMAC_BCDC_H
#define BRCMFMAC_BCDC_H
-
+#ifdef CONFIG_BRCMFMAC_PROTO_BCDC
int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
-
+#else
+static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
+static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+#endif
#endif /* BRCMFMAC_BCDC_H */
@@ -185,7 +185,13 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr,
ifevent->action, ifevent->ifidx, ifevent->bssidx,
ifevent->flags, ifevent->role);
- if (ifevent->flags & BRCMF_E_IF_FLAG_NOIF) {
+ /* The P2P Device interface event must not be ignored
+ * contrary to what firmware tells us. The only way to
+ * distinguish the P2P Device is by looking at the ifidx
+ * and bssidx received.
+ */
+ if (!(ifevent->ifidx == 0 && ifevent->bssidx == 1) &&
+ (ifevent->flags & BRCMF_E_IF_FLAG_NOIF)) {
brcmf_dbg(EVENT, "event can be ignored\n");
return;
}
@@ -210,12 +216,12 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr,
return;
}
- if (ifevent->action == BRCMF_E_IF_CHANGE)
+ if (ifp && ifevent->action == BRCMF_E_IF_CHANGE)
brcmf_fws_reset_interface(ifp);
err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data);
- if (ifevent->action == BRCMF_E_IF_DEL) {
+ if (ifp && ifevent->action == BRCMF_E_IF_DEL) {
brcmf_fws_del_interface(ifp);
brcmf_del_if(drvr, ifevent->bssidx);
}
@@ -172,6 +172,8 @@ enum brcmf_fweh_event_code {
#define BRCMF_E_IF_ROLE_STA 0
#define BRCMF_E_IF_ROLE_AP 1
#define BRCMF_E_IF_ROLE_WDS 2
+#define BRCMF_E_IF_ROLE_P2P_GO 3
+#define BRCMF_E_IF_ROLE_P2P_CLIENT 4
/**
* definitions for event packet validation.
@@ -15,6 +15,7 @@
#ifndef BRCMFMAC_MSGBUF_H
#define BRCMFMAC_MSGBUF_H
+#ifdef CONFIG_BRCMFMAC_PROTO_MSGBUF
#define BRCMF_H2D_MSGRING_CONTROL_SUBMIT_MAX_ITEM 20
#define BRCMF_H2D_MSGRING_RXPOST_SUBMIT_MAX_ITEM 256
@@ -32,9 +33,15 @@
int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr);
void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr);
-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
-
+#else
+static inline int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
+{
+ return 0;
+}
+static inline void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr) {}
+#endif
#endif /* BRCMFMAC_MSGBUF_H */
@@ -497,8 +497,11 @@ brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable)
static void
brcmf_cfg80211_update_proto_addr_mode(struct wireless_dev *wdev)
{
- struct net_device *ndev = wdev->netdev;
- struct brcmf_if *ifp = netdev_priv(ndev);
+ struct brcmf_cfg80211_vif *vif;
+ struct brcmf_if *ifp;
+
+ vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
+ ifp = vif->ifp;
if ((wdev->iftype == NL80211_IFTYPE_ADHOC) ||
(wdev->iftype == NL80211_IFTYPE_AP) ||
@@ -5143,6 +5146,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
ch.band = BRCMU_CHAN_BAND_2G;
ch.bw = BRCMU_CHAN_BW_40;
+ ch.sb = BRCMU_CHAN_SB_NONE;
ch.chnum = 0;
cfg->d11inf.encchspec(&ch);
@@ -5176,6 +5180,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_cfg80211_info *cfg)
brcmf_update_bw40_channel_flag(&band->channels[j], &ch);
}
+ kfree(pbuf);
}
return err;
}
@@ -163,6 +163,7 @@ static const struct acpi_device_id rfkill_acpi_match[] = {
{ "LNV4752", RFKILL_TYPE_GPS },
{ },
};
+MODULE_DEVICE_TABLE(acpi, rfkill_acpi_match);
#endif
static struct platform_driver rfkill_gpio_driver = {
Dave, Please pull this batch of fixes intended for the 3.17 stream... Arend van Spriel sends a trio of minor brcmfmac fixes, including a fix for a Kconfig/build issue, a fix for a crash (null reference), and a regression fix related to event handling on a P2P interface. Hante Meuleman follows-up with a brcmfmac fix for a memory leak. Johannes Stezenbach brings an ath9k_htc fix for a regression related to hardware decryption offload. Marcel Holtmann delivers a one-liner to properly mark a device ID table in rfkill-gpio. Please let me know if there are problems! Thanks, John --- The following changes since commit ae0fd6354134e63aa3e62456e2080c430287144d: Revert "ath9k: Calculate sleep duration" (2014-09-11 14:17:20 -0400) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git tags/master-2014-09-16 for you to fetch changes up to dda3b191eb6c5a56d443723dcb71ade60d97c04f: net: rfkill: gpio: Enable module auto-loading for ACPI based switches (2014-09-16 16:09:01 -0400) ---------------------------------------------------------------- Arend van Spriel (3): brcmfmac: conditionally compile firmware protocol source code brcmfmac: obtain ifp through wdev structure brcmfmac: handle IF event for P2P_DEVICE interface Hante Meuleman (1): brcmfmac: Fix memory leak and missing assignment. Johannes Stezenbach (1): ath9k_htc: fix random decryption failure Marcel Holtmann (1): net: rfkill: gpio: Enable module auto-loading for ACPI based switches drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 2 +- drivers/net/wireless/brcm80211/Kconfig | 10 ++++++++++ drivers/net/wireless/brcm80211/brcmfmac/Makefile | 10 ++++++---- drivers/net/wireless/brcm80211/brcmfmac/bcdc.h | 7 +++++-- drivers/net/wireless/brcm80211/brcmfmac/fweh.c | 12 +++++++++--- drivers/net/wireless/brcm80211/brcmfmac/fweh.h | 2 ++ drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h | 11 +++++++++-- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 9 +++++++-- net/rfkill/rfkill-gpio.c | 1 + 9 files changed, 50 insertions(+), 14 deletions(-)