@@ -510,7 +510,7 @@ static int ath10k_download_fw(struct ath10k *ar, enum ath10k_firmware_mode mode)
data_len = ar->firmware_len;
mode_name = "normal";
ret = ath10k_swap_code_seg_configure(ar,
- ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
+ ATH10K_SWAP_CODE_SEG_BIN_TYPE_FW);
if (ret) {
ath10k_err(ar, "failed to configure fw code swap: %d\n",
ret);
@@ -1263,10 +1263,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
goto err;
/* Some of of qca988x solutions are having global reset issue
- * during target initialization. Bypassing PLL setting before
- * downloading firmware and letting the SoC run on REF_CLK is
- * fixing the problem. Corresponding firmware change is also needed
- * to set the clock source once the target is initialized.
+ * during target initialization. Bypassing PLL setting before
+ * downloading firmware and letting the SoC run on REF_CLK is
+ * fixing the problem. Corresponding firmware change is also needed
+ * to set the clock source once the target is initialized.
*/
if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT,
ar->fw_features)) {
@@ -4656,7 +4656,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
info->use_cts_prot ? 1 : 0);
if (ret)
ath10k_warn(ar, "failed to set protection mode %d on vdev %i: %d\n",
- info->use_cts_prot, arvif->vdev_id, ret);
+ info->use_cts_prot, arvif->vdev_id, ret);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -6268,8 +6268,8 @@ ath10k_mac_update_rx_channel(struct ath10k *ar,
rcu_read_lock();
if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) {
ieee80211_iter_chan_contexts_atomic(ar->hw,
- ath10k_mac_get_any_chandef_iter,
- &def);
+ ath10k_mac_get_any_chandef_iter,
+ &def);
if (vifs)
def = &vifs[0].new_ctx->def;
@@ -2257,7 +2257,7 @@ static int ath10k_pci_qca6174_chip_reset(struct ath10k *ar)
ret = ath10k_pci_wait_for_target_init(ar);
if (ret) {
ath10k_warn(ar, "failed to wait for target after cold reset: %d\n",
- ret);
+ ret);
return ret;
}
@@ -3507,7 +3507,7 @@ void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
tsf);
if (res < 0) {
ath10k_dbg(ar, ATH10K_DBG_WMI, "failed to process fft report: %d\n",
- res);
+ res);
return;
}
break;
checkpatch found: drivers/net/wireless/ath/ath10k/core.c:513: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/core.c:1266: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/core.c:1267: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/core.c:1268: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/core.c:1269: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/mac.c:4659: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/mac.c:6271: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/pci.c:2260: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/wmi.c:3510: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 10 +++++----- drivers/net/wireless/ath/ath10k/mac.c | 6 +++--- drivers/net/wireless/ath/ath10k/pci.c | 2 +- drivers/net/wireless/ath/ath10k/wmi.c | 2 +- 4 files changed, 10 insertions(+), 10 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html