@@ -2161,6 +2161,59 @@ static const struct file_operations fops_btcoex = {
.open = simple_open
};
+static ssize_t ath10k_debug_fw_checksums_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ unsigned int len = 0, buf_len = 4096;
+ ssize_t ret_cnt;
+ char *buf;
+
+ buf = kzalloc(buf_len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (len > buf_len)
+ len = buf_len;
+
+ len += scnprintf(buf + len, buf_len - len,
+ "firmware-N.bin\t\t%08x\n",
+ crc32_le(0, ar->firmware->data, ar->firmware->size));
+ len += scnprintf(buf + len, buf_len - len,
+ "athwlan\t\t\t%08x\n",
+ crc32_le(0, ar->firmware_data, ar->firmware_len));
+ len += scnprintf(buf + len, buf_len - len,
+ "otp\t\t\t%08x\n",
+ crc32_le(0, ar->otp_data, ar->otp_len));
+ len += scnprintf(buf + len, buf_len - len,
+ "codeswap\t\t%08x\n",
+ crc32_le(0, ar->swap.firmware_codeswap_data,
+ ar->swap.firmware_codeswap_len));
+ len += scnprintf(buf + len, buf_len - len,
+ "board-N.bin\t\t%08x\n",
+ crc32_le(0, ar->board->data, ar->board->size));
+ len += scnprintf(buf + len, buf_len - len,
+ "board\t\t\t%08x\n",
+ crc32_le(0, ar->board_data, ar->board_len));
+
+ ret_cnt = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+
+ mutex_unlock(&ar->conf_mutex);
+
+ kfree(buf);
+ return ret_cnt;
+}
+
+static const struct file_operations fops_fw_checksums = {
+ .read = ath10k_debug_fw_checksums_read,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
int ath10k_debug_create(struct ath10k *ar)
{
ar->debug.fw_crash_data = vzalloc(sizeof(*ar->debug.fw_crash_data));
@@ -2274,6 +2327,9 @@ int ath10k_debug_register(struct ath10k *ar)
debugfs_create_file("btcoex", S_IRUGO | S_IWUSR,
ar->debug.debugfs_phy, ar, &fops_btcoex);
+ debugfs_create_file("fw_checksums", S_IRUSR,
+ ar->debug.debugfs_phy, ar, &fops_fw_checksums);
+
return 0;
}
When debugging firmware problems it's useful to check checksums of each component. Add a debugfs interface to retrieve crc32 checksums: # cat /sys/kernel/debug/ieee80211/phy0/ath10k/fw_checksums firmware-N.bin cc3fb466 athwlan c0089f21 otp f3efeb4f codeswap 00000000 board-N.bin bebc7c08 board bebc7c08 Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> --- drivers/net/wireless/ath/ath10k/debug.c | 56 +++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html