| Message ID | 20180727204337.60767-1-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | [v2] PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry | expand |
On 07/27/2018 01:43 PM, Andy Shevchenko wrote: > There are a lot of examples in the kernel where PCI_VDEVICE() is used and still > looks not so convenient due to additional driver_data field attached. > > Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest > possible form. For example, > > before: > > { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), > (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, > > after: > > { PCI_VDEVICE(INTEL, INTEL_MRFLD, &dwc3_pci_mrfld_properties }, { PCI_DEVICE_DATA( ies) }, I guess. or what? > > Drivers can be converted later on in independent way. > > While here, remove the unused macro with the same name > from Ralink wireless driver. > > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > --- > drivers/net/wireless/ralink/rt2x00/rt2x00pci.h | 6 ------ > include/linux/pci.h | 15 +++++++++++++++ > 2 files changed, 15 insertions(+), 6 deletions(-) > > diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h > index bc0ca5f58f38..283e2e607bba 100644 > --- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h > +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h > @@ -27,12 +27,6 @@ > #include <linux/io.h> > #include <linux/pci.h> > > -/* > - * This variable should be used with the > - * pci_driver structure initialization. > - */ > -#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) > - > /* > * PCI driver handlers. > */ > diff --git a/include/linux/pci.h b/include/linux/pci.h > index d0961aefdbae..754da6f9adb3 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -825,6 +825,21 @@ struct pci_driver { > .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \ > .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0 > > +/** > + * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very short form > + * @vend: the vendor name (without PCI_VENDOR_ID_ prefix) > + * @dev: the device name (without PCI_DEVICE_ID_ prefix) > + * @data: the driver data to be filled > + * > + * This macro is used to create a struct pci_device_id that matches a > + * specific PCI device. The subvendor, and subdevice fields will be set > + * to PCI_ANY_ID. > + */ > +#define PCI_DEVICE_DATA(vend, dev, data) \ > + .vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##dev, \ > + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \ > + .driver_data = (kernel_ulong_t)(data) > + > enum { > PCI_REASSIGN_ALL_RSRC = 0x00000001, /* Ignore firmware setup */ > PCI_REASSIGN_ALL_BUS = 0x00000002, /* Reassign all bus numbers */ >
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h index bc0ca5f58f38..283e2e607bba 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h @@ -27,12 +27,6 @@ #include <linux/io.h> #include <linux/pci.h> -/* - * This variable should be used with the - * pci_driver structure initialization. - */ -#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) - /* * PCI driver handlers. */ diff --git a/include/linux/pci.h b/include/linux/pci.h index d0961aefdbae..754da6f9adb3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -825,6 +825,21 @@ struct pci_driver { .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0 +/** + * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very short form + * @vend: the vendor name (without PCI_VENDOR_ID_ prefix) + * @dev: the device name (without PCI_DEVICE_ID_ prefix) + * @data: the driver data to be filled + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI device. The subvendor, and subdevice fields will be set + * to PCI_ANY_ID. + */ +#define PCI_DEVICE_DATA(vend, dev, data) \ + .vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##dev, \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \ + .driver_data = (kernel_ulong_t)(data) + enum { PCI_REASSIGN_ALL_RSRC = 0x00000001, /* Ignore firmware setup */ PCI_REASSIGN_ALL_BUS = 0x00000002, /* Reassign all bus numbers */
There are a lot of examples in the kernel where PCI_VDEVICE() is used and still looks not so convenient due to additional driver_data field attached. Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest possible form. For example, before: { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, after: { PCI_VDEVICE(INTEL, INTEL_MRFLD, &dwc3_pci_mrfld_properties }, Drivers can be converted later on in independent way. While here, remove the unused macro with the same name from Ralink wireless driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/net/wireless/ralink/rt2x00/rt2x00pci.h | 6 ------ include/linux/pci.h | 15 +++++++++++++++ 2 files changed, 15 insertions(+), 6 deletions(-)