@@ -81,7 +81,7 @@ mt76x0_mcu_calibrate(struct mt76x0_dev *dev, enum mcu_calibrate cal, u32 val)
int mt76x0_write_reg_pairs(struct mt76x0_dev *dev, u32 base,
const struct mt76_reg_pair *data, int n)
{
- const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8;
+ const int max_vals_per_cmd = MT_INBAND_PACKET_MAX_LEN / 8;
struct sk_buff *skb;
int cnt, i, ret;
@@ -111,7 +111,7 @@ int mt76x0_write_reg_pairs(struct mt76x0_dev *dev, u32 base,
int mt76x0_read_reg_pairs(struct mt76x0_dev *dev, u32 base,
struct mt76_reg_pair *data, int n)
{
- const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8;
+ const int max_vals_per_cmd = MT_INBAND_PACKET_MAX_LEN / 8;
struct mt76_usb *usb = &dev->mt76.usb;
struct sk_buff *skb;
int cnt, i, ret;
@@ -154,7 +154,7 @@ int mt76x0_read_reg_pairs(struct mt76x0_dev *dev, u32 base,
int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
const u32 *data, int n)
{
- const int max_regs_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1;
+ const int max_regs_per_cmd = MT_INBAND_PACKET_MAX_LEN / 4 - 1;
struct sk_buff *skb;
int cnt, i, ret;
@@ -185,7 +185,7 @@ int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
static int mt76x0_burst_read_regs(struct mt76x0_dev *dev, u32 base,
struct mt76_reg_pair *data, int n)
{
- const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1;
+ const int max_vals_per_cmd = MT_INBAND_PACKET_MAX_LEN / 4 - 1;
struct mt76_usb *usb = &dev->mt76.usb;
struct sk_buff *skb;
int cnt, ret;
@@ -15,65 +15,18 @@
#ifndef __MT76X0U_MCU_H
#define __MT76X0U_MCU_H
-struct mt76x0_dev;
+#include "../mt76x02_mcu.h"
-/* Register definitions */
-#define MT_MCU_RESET_CTL 0x070C
-#define MT_MCU_INT_LEVEL 0x0718
-#define MT_MCU_COM_REG0 0x0730
-#define MT_MCU_COM_REG1 0x0734
-#define MT_MCU_COM_REG2 0x0738
-#define MT_MCU_COM_REG3 0x073C
+struct mt76x0_dev;
#define MT_MCU_IVB_SIZE 0x40
#define MT_MCU_DLM_OFFSET 0x80000
-#define MT_MCU_MEMMAP_WLAN 0x00410000
/* We use same space for BBP as for MAC regs
* #define MT_MCU_MEMMAP_BBP 0x40000000
*/
#define MT_MCU_MEMMAP_RF 0x80000000
-#define INBAND_PACKET_MAX_LEN 192
-
-enum mcu_cmd {
- CMD_FUN_SET_OP = 1,
- CMD_LOAD_CR = 2,
- CMD_INIT_GAIN_OP = 3,
- CMD_DYNC_VGA_OP = 6,
- CMD_TDLS_CH_SW = 7,
- CMD_BURST_WRITE = 8,
- CMD_READ_MODIFY_WRITE = 9,
- CMD_RANDOM_READ = 10,
- CMD_BURST_READ = 11,
- CMD_RANDOM_WRITE = 12,
- CMD_LED_MODE_OP = 16,
- CMD_POWER_SAVING_OP = 20,
- CMD_WOW_CONFIG = 21,
- CMD_WOW_QUERY = 22,
- CMD_WOW_FEATURE = 24,
- CMD_CARRIER_DETECT_OP = 28,
- CMD_RADOR_DETECT_OP = 29,
- CMD_SWITCH_CHANNEL_OP = 30,
- CMD_CALIBRATION_OP = 31,
- CMD_BEACON_OP = 32,
- CMD_ANTENNA_OP = 33,
-};
-
-enum mcu_function {
- Q_SELECT = 1,
- BW_SETTING = 2,
- ATOMIC_TSSI_SETTING = 5,
-};
-
-enum mcu_power_mode {
- RADIO_OFF = 0x30,
- RADIO_ON = 0x31,
- RADIO_OFF_AUTO_WAKEUP = 0x32,
- RADIO_OFF_ADVANCE = 0x33,
- RADIO_ON_ADVANCE = 0x34,
-};
-
enum mcu_calibrate {
MCU_CAL_R = 1,
MCU_CAL_RXDCOC,
new file mode 100644
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __MT76x02_MCU_H
+#define __MT76x0x_MCU_H
+
+#define MT_MCU_RESET_CTL 0x070C
+#define MT_MCU_INT_LEVEL 0x0718
+#define MT_MCU_COM_REG0 0x0730
+#define MT_MCU_COM_REG1 0x0734
+#define MT_MCU_COM_REG2 0x0738
+#define MT_MCU_COM_REG3 0x073C
+
+#define MT_INBAND_PACKET_MAX_LEN 192
+#define MT_MCU_MEMMAP_WLAN 0x410000
+
+enum mcu_cmd {
+ CMD_FUN_SET_OP = 1,
+ CMD_LOAD_CR = 2,
+ CMD_INIT_GAIN_OP = 3,
+ CMD_DYNC_VGA_OP = 6,
+ CMD_TDLS_CH_SW = 7,
+ CMD_BURST_WRITE = 8,
+ CMD_READ_MODIFY_WRITE = 9,
+ CMD_RANDOM_READ = 10,
+ CMD_BURST_READ = 11,
+ CMD_RANDOM_WRITE = 12,
+ CMD_LED_MODE_OP = 16,
+ CMD_POWER_SAVING_OP = 20,
+ CMD_WOW_CONFIG = 21,
+ CMD_WOW_QUERY = 22,
+ CMD_WOW_FEATURE = 24,
+ CMD_CARRIER_DETECT_OP = 28,
+ CMD_RADOR_DETECT_OP = 29,
+ CMD_SWITCH_CHANNEL_OP = 30,
+ CMD_CALIBRATION_OP = 31,
+ CMD_BEACON_OP = 32,
+ CMD_ANTENNA_OP = 33,
+};
+
+enum mcu_power_mode {
+ RADIO_OFF = 0x30,
+ RADIO_ON = 0x31,
+ RADIO_OFF_AUTO_WAKEUP = 0x32,
+ RADIO_OFF_ADVANCE = 0x33,
+ RADIO_ON_ADVANCE = 0x34,
+};
+
+enum mcu_function {
+ Q_SELECT = 1,
+ BW_SETTING = 2,
+ USB2_SW_DISCONNECT = 2,
+ USB3_SW_DISCONNECT = 3,
+ LOG_FW_DEBUG_MSG = 4,
+ GET_FW_VERSION = 5,
+};
+
+#endif /* __MT76x02_MCU_H */
@@ -17,15 +17,11 @@
#ifndef __MT76x2_MCU_H
#define __MT76x2_MCU_H
+#include "mt76x02_mcu.h"
+
/* Register definitions */
#define MT_MCU_CPU_CTL 0x0704
#define MT_MCU_CLOCK_CTL 0x0708
-#define MT_MCU_RESET_CTL 0x070C
-#define MT_MCU_INT_LEVEL 0x0718
-#define MT_MCU_COM_REG0 0x0730
-#define MT_MCU_COM_REG1 0x0734
-#define MT_MCU_COM_REG2 0x0738
-#define MT_MCU_COM_REG3 0x073C
#define MT_MCU_PCIE_REMAP_BASE1 0x0740
#define MT_MCU_PCIE_REMAP_BASE2 0x0744
#define MT_MCU_PCIE_REMAP_BASE3 0x0748
@@ -69,47 +65,6 @@
#define MT_MCU_DLM_ADDR 0x90000
#define MT_MCU_DLM_ADDR_E3 0x90800
-enum mcu_cmd {
- CMD_FUN_SET_OP = 1,
- CMD_LOAD_CR = 2,
- CMD_INIT_GAIN_OP = 3,
- CMD_DYNC_VGA_OP = 6,
- CMD_TDLS_CH_SW = 7,
- CMD_BURST_WRITE = 8,
- CMD_READ_MODIFY_WRITE = 9,
- CMD_RANDOM_READ = 10,
- CMD_BURST_READ = 11,
- CMD_RANDOM_WRITE = 12,
- CMD_LED_MODE_OP = 16,
- CMD_POWER_SAVING_OP = 20,
- CMD_WOW_CONFIG = 21,
- CMD_WOW_QUERY = 22,
- CMD_WOW_FEATURE = 24,
- CMD_CARRIER_DETECT_OP = 28,
- CMD_RADOR_DETECT_OP = 29,
- CMD_SWITCH_CHANNEL_OP = 30,
- CMD_CALIBRATION_OP = 31,
- CMD_BEACON_OP = 32,
- CMD_ANTENNA_OP = 33,
-};
-
-enum mcu_function {
- Q_SELECT = 1,
- BW_SETTING = 2,
- USB2_SW_DISCONNECT = 2,
- USB3_SW_DISCONNECT = 3,
- LOG_FW_DEBUG_MSG = 4,
- GET_FW_VERSION = 5,
-};
-
-enum mcu_power_mode {
- RADIO_OFF = 0x30,
- RADIO_ON = 0x31,
- RADIO_OFF_AUTO_WAKEUP = 0x32,
- RADIO_OFF_ADVANCE = 0x33,
- RADIO_ON_ADVANCE = 0x34,
-};
-
enum mcu_calibration {
MCU_CAL_R = 1,
MCU_CAL_TEMP_SENSOR,
@@ -20,8 +20,6 @@
#include "mt76x2_eeprom.h"
#define MT_CMD_HDR_LEN 4
-#define MT_INBAND_PACKET_MAX_LEN 192
-#define MT_MCU_MEMMAP_WLAN 0x410000
#define MCU_FW_URB_MAX_PAYLOAD 0x3900
#define MCU_ROM_PATCH_MAX_PAYLOAD 2048
Move mt76x0 and mt76x2 mcu shared definition in mt76x02_mcu.h and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> --- .../net/wireless/mediatek/mt76/mt76x0/mcu.c | 8 +-- .../net/wireless/mediatek/mt76/mt76x0/mcu.h | 51 +------------ .../net/wireless/mediatek/mt76/mt76x02_mcu.h | 71 +++++++++++++++++++ .../net/wireless/mediatek/mt76/mt76x2_mcu.h | 49 +------------ .../net/wireless/mediatek/mt76/mt76x2u_mcu.c | 2 - 5 files changed, 79 insertions(+), 102 deletions(-) create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x02_mcu.h