@@ -275,6 +275,19 @@ struct mt76_sband {
struct mt76_channel_state *chan;
};
+struct mt76_rate_power {
+ union {
+ struct {
+ s8 cck[4];
+ s8 ofdm[8];
+ s8 stbc[10];
+ s8 ht[16];
+ s8 vht[10];
+ };
+ s8 all[48];
+ };
+};
+
/* addr req mask */
#define MT_VEND_TYPE_EEPROM BIT(31)
#define MT_VEND_TYPE_CFG BIT(30)
@@ -395,6 +408,10 @@ struct mt76_dev {
struct debugfs_blob_wrapper otp;
struct mt76_hw_cap cap;
+ struct mt76_rate_power rate_power;
+ int txpower_conf;
+ int txpower_cur;
+
u32 debugfs_reg;
struct led_classdev led_cdev;
@@ -418,19 +435,6 @@ enum mt76_phy_type {
MT_PHY_TYPE_VHT,
};
-struct mt76_rate_power {
- union {
- struct {
- s8 cck[4];
- s8 ofdm[8];
- s8 stbc[10];
- s8 ht[16];
- s8 vht[10];
- };
- s8 all[48];
- };
-};
-
struct mt76_rx_status {
struct mt76_wcid *wcid;
@@ -82,8 +82,6 @@ struct mt76x2_dev {
struct mutex mutex;
const u16 *beacon_offsets;
- int txpower_conf;
- int txpower_cur;
u8 txdone_seq;
DECLARE_KFIFO_PTR(txstatus_fifo, struct mt76x02_tx_status);
@@ -113,7 +111,6 @@ struct mt76x2_dev {
s8 target_power;
s8 target_power_delta[2];
- struct mt76_rate_power rate_power;
bool enable_tpc;
u8 coverage_class;
@@ -55,16 +55,16 @@ static int read_txpower(struct seq_file *file, void *data)
mt76_seq_puts_array(file, "Delta", dev->target_power_delta,
ARRAY_SIZE(dev->target_power_delta));
- mt76_seq_puts_array(file, "CCK", dev->rate_power.cck,
- ARRAY_SIZE(dev->rate_power.cck));
- mt76_seq_puts_array(file, "OFDM", dev->rate_power.ofdm,
- ARRAY_SIZE(dev->rate_power.ofdm));
- mt76_seq_puts_array(file, "STBC", dev->rate_power.stbc,
- ARRAY_SIZE(dev->rate_power.stbc));
- mt76_seq_puts_array(file, "HT", dev->rate_power.ht,
- ARRAY_SIZE(dev->rate_power.ht));
- mt76_seq_puts_array(file, "VHT", dev->rate_power.vht,
- ARRAY_SIZE(dev->rate_power.vht));
+ mt76_seq_puts_array(file, "CCK", dev->mt76.rate_power.cck,
+ ARRAY_SIZE(dev->mt76.rate_power.cck));
+ mt76_seq_puts_array(file, "OFDM", dev->mt76.rate_power.ofdm,
+ ARRAY_SIZE(dev->mt76.rate_power.ofdm));
+ mt76_seq_puts_array(file, "STBC", dev->mt76.rate_power.stbc,
+ ARRAY_SIZE(dev->mt76.rate_power.stbc));
+ mt76_seq_puts_array(file, "HT", dev->mt76.rate_power.ht,
+ ARRAY_SIZE(dev->mt76.rate_power.ht));
+ mt76_seq_puts_array(file, "VHT", dev->mt76.rate_power.vht,
+ ARRAY_SIZE(dev->mt76.rate_power.vht));
return 0;
}
@@ -100,7 +100,7 @@ void mt76x2_mac_write_txwi(struct mt76x2_dev *dev, struct mt76x02_txwi *txwi,
}
spin_unlock_bh(&dev->mt76.lock);
- txpwr_adj = mt76x2_tx_get_txpwr_adj(dev, dev->txpower_conf,
+ txpwr_adj = mt76x2_tx_get_txpwr_adj(dev, dev->mt76.txpower_conf,
max_txpwr_adj);
txwi->ctl2 = FIELD_PREP(MT_TX_PWR_ADJ, txpwr_adj);
@@ -106,14 +106,14 @@ mt76x2_config(struct ieee80211_hw *hw, u32 changed)
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
- dev->txpower_conf = hw->conf.power_level * 2;
+ dev->mt76.txpower_conf = hw->conf.power_level * 2;
/* convert to per-chain power for 2x2 devices */
- dev->txpower_conf -= 6;
+ dev->mt76.txpower_conf -= 6;
if (test_bit(MT76_STATE_RUNNING, &dev->mt76.state)) {
mt76x2_phy_set_txpower(dev);
- mt76x2_tx_set_txpwr_auto(dev, dev->txpower_conf);
+ mt76x2_tx_set_txpwr_auto(dev, dev->mt76.txpower_conf);
}
}
@@ -206,7 +206,7 @@ mt76x2_get_txpower(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int *dbm)
{
struct mt76x2_dev *dev = hw->priv;
- *dbm = dev->txpower_cur / 2;
+ *dbm = dev->mt76.txpower_cur / 2;
/* convert from per-chain power to combined output on 2x2 devices */
*dbm += 3;
@@ -192,8 +192,8 @@ void mt76x2_phy_set_txpower(struct mt76x2_dev *dev)
mt76x2_get_rate_power(dev, &t, chan);
mt76x2_add_rate_power_offset(&t, txp.chain[0].target_power);
- mt76x2_limit_rate_power(&t, dev->txpower_conf);
- dev->txpower_cur = mt76x2_get_max_rate_power(&t);
+ mt76x2_limit_rate_power(&t, dev->mt76.txpower_conf);
+ dev->mt76.txpower_cur = mt76x2_get_max_rate_power(&t);
base_power = mt76x2_get_min_rate_power(&t);
delta += base_power - txp.chain[0].target_power;
@@ -215,7 +215,7 @@ void mt76x2_phy_set_txpower(struct mt76x2_dev *dev)
dev->target_power = txp.chain[0].target_power;
dev->target_power_delta[0] = txp_0 - txp.chain[0].target_power;
dev->target_power_delta[1] = txp_1 - txp.chain[0].target_power;
- dev->rate_power = t;
+ dev->mt76.rate_power = t;
mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_0, txp_0);
mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_1, txp_1);
@@ -57,23 +57,23 @@ s8 mt76x2_tx_get_max_txpwr_adj(struct mt76_dev *mdev,
u8 mcs = ieee80211_rate_get_vht_mcs(rate);
if (mcs == 8 || mcs == 9) {
- max_txpwr = dev->rate_power.vht[8];
+ max_txpwr = mdev->rate_power.vht[8];
} else {
u8 nss, idx;
nss = ieee80211_rate_get_vht_nss(rate);
idx = ((nss - 1) << 3) + mcs;
- max_txpwr = dev->rate_power.ht[idx & 0xf];
+ max_txpwr = mdev->rate_power.ht[idx & 0xf];
}
} else if (rate->flags & IEEE80211_TX_RC_MCS) {
- max_txpwr = dev->rate_power.ht[rate->idx & 0xf];
+ max_txpwr = mdev->rate_power.ht[rate->idx & 0xf];
} else {
enum nl80211_band band = dev->mt76.chandef.chan->band;
if (band == NL80211_BAND_2GHZ) {
const struct ieee80211_rate *r;
struct wiphy *wiphy = mt76_hw(dev)->wiphy;
- struct mt76_rate_power *rp = &dev->rate_power;
+ struct mt76_rate_power *rp = &mdev->rate_power;
r = &wiphy->bands[band]->bitrates[rate->idx];
if (r->flags & IEEE80211_RATE_SHORT_PREAMBLE)
@@ -81,7 +81,7 @@ s8 mt76x2_tx_get_max_txpwr_adj(struct mt76_dev *mdev,
else
max_txpwr = rp->ofdm[r->hw_value & 0x7];
} else {
- max_txpwr = dev->rate_power.ofdm[rate->idx & 0x7];
+ max_txpwr = mdev->rate_power.ofdm[rate->idx & 0x7];
}
}
@@ -91,7 +91,7 @@ EXPORT_SYMBOL_GPL(mt76x2_tx_get_max_txpwr_adj);
s8 mt76x2_tx_get_txpwr_adj(struct mt76x2_dev *dev, s8 txpwr, s8 max_txpwr_adj)
{
- txpwr = min_t(s8, txpwr, dev->txpower_conf);
+ txpwr = min_t(s8, txpwr, dev->mt76.txpower_conf);
txpwr -= (dev->target_power + dev->target_power_delta[0]);
txpwr = min_t(s8, txpwr, max_txpwr_adj);
@@ -109,7 +109,7 @@ void mt76x2_tx_set_txpwr_auto(struct mt76x2_dev *dev, s8 txpwr)
s8 txpwr_adj;
txpwr_adj = mt76x2_tx_get_txpwr_adj(dev, txpwr,
- dev->rate_power.ofdm[4]);
+ dev->mt76.rate_power.ofdm[4]);
mt76_rmw_field(dev, MT_PROT_AUTO_TX_CFG,
MT_PROT_AUTO_TX_CFG_PROT_PADJ, txpwr_adj);
mt76_rmw_field(dev, MT_PROT_AUTO_TX_CFG,
@@ -128,10 +128,10 @@ mt76x2u_config(struct ieee80211_hw *hw, u32 changed)
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
- dev->txpower_conf = hw->conf.power_level * 2;
+ dev->mt76.txpower_conf = hw->conf.power_level * 2;
/* convert to per-chain power for 2x2 devices */
- dev->txpower_conf -= 6;
+ dev->mt76.txpower_conf -= 6;
if (test_bit(MT76_STATE_RUNNING, &dev->mt76.state))
mt76x2_phy_set_txpower(dev);
Move mt76_rate_power data structure from mt76x2_dev to mt76_dev in order to share it with mt76x0 driver. Moreover move txpower_conf and txpower_cur in mt76_dev Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> --- drivers/net/wireless/mediatek/mt76/mt76.h | 30 +++++++++++-------- drivers/net/wireless/mediatek/mt76/mt76x2.h | 3 -- .../wireless/mediatek/mt76/mt76x2_debugfs.c | 20 ++++++------- .../mediatek/mt76/mt76x2_mac_common.c | 2 +- .../net/wireless/mediatek/mt76/mt76x2_main.c | 8 ++--- .../mediatek/mt76/mt76x2_phy_common.c | 6 ++-- .../wireless/mediatek/mt76/mt76x2_tx_common.c | 14 ++++----- .../net/wireless/mediatek/mt76/mt76x2u_main.c | 4 +-- 8 files changed, 44 insertions(+), 43 deletions(-)