@@ -161,6 +161,13 @@ void mt76x02_set_beacon_offsets(struct mt76x02_dev *dev);
void mt76x02_set_irq_mask(struct mt76x02_dev *dev, u32 clear, u32 set);
void mt76x02_mac_start(struct mt76x02_dev *dev);
+static inline bool is_mt76x2(struct mt76x02_dev *dev)
+{
+ return mt76_chip(&dev->mt76) == 0x7612 ||
+ mt76_chip(&dev->mt76) == 0x7662 ||
+ mt76_chip(&dev->mt76) == 0x7602;
+}
+
static inline void mt76x02_irq_enable(struct mt76x02_dev *dev, u32 mask)
{
mt76x02_set_irq_mask(dev, 0, mask);
@@ -156,48 +156,6 @@ void mt76x02_txq_init(struct mt76x02_dev *dev, struct ieee80211_txq *txq)
}
EXPORT_SYMBOL_GPL(mt76x02_txq_init);
-static void
-mt76x02_mac_fill_txwi(struct mt76x02_txwi *txwi, struct sk_buff *skb,
- struct ieee80211_sta *sta, int len, u8 nss)
-{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- u16 txwi_flags = 0;
-
- if (info->flags & IEEE80211_TX_CTL_LDPC)
- txwi->rate |= cpu_to_le16(MT_RXWI_RATE_LDPC);
- if ((info->flags & IEEE80211_TX_CTL_STBC) && nss == 1)
- txwi->rate |= cpu_to_le16(MT_RXWI_RATE_STBC);
- if (nss > 1 && sta && sta->smps_mode == IEEE80211_SMPS_DYNAMIC)
- txwi_flags |= MT_TXWI_FLAGS_MMPS;
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
- txwi->ack_ctl |= MT_TXWI_ACK_CTL_REQ;
- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
- txwi->ack_ctl |= MT_TXWI_ACK_CTL_NSEQ;
- if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
- txwi->pktid |= MT_TXWI_PKTID_PROBE;
- if ((info->flags & IEEE80211_TX_CTL_AMPDU) && sta) {
- u8 ba_size = IEEE80211_MIN_AMPDU_BUF;
-
- ba_size <<= sta->ht_cap.ampdu_factor;
- ba_size = min_t(int, 63, ba_size - 1);
- if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
- ba_size = 0;
- txwi->ack_ctl |= FIELD_PREP(MT_TXWI_ACK_CTL_BA_WINDOW, ba_size);
-
- txwi_flags |= MT_TXWI_FLAGS_AMPDU |
- FIELD_PREP(MT_TXWI_FLAGS_MPDU_DENSITY,
- sta->ht_cap.ampdu_density);
- }
-
- if (ieee80211_is_probe_resp(hdr->frame_control) ||
- ieee80211_is_beacon(hdr->frame_control))
- txwi_flags |= MT_TXWI_FLAGS_TS;
-
- txwi->flags |= cpu_to_le16(txwi_flags);
- txwi->len_ctl = cpu_to_le16(len);
-}
-
static __le16
mt76x02_mac_tx_rate_val(struct mt76x02_dev *dev,
const struct ieee80211_tx_rate *rate, u8 *nss_val)
@@ -344,10 +302,12 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
struct sk_buff *skb, struct mt76_wcid *wcid,
struct ieee80211_sta *sta, int len)
{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_tx_rate *rate = &info->control.rates[0];
struct ieee80211_key_conf *key = info->control.hw_key;
u16 rate_ht_mask = FIELD_PREP(MT_RXWI_RATE_PHY, BIT(1) | BIT(2));
+ u16 txwi_flags = 0;
u8 nss;
s8 txpwr_adj, max_txpwr_adj;
u8 ccmp_pn[8], nstreams = dev->mt76.chainmask & 0xf;
@@ -396,7 +356,38 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
!(txwi->rate & cpu_to_le16(rate_ht_mask)))
txwi->txstream = 0x93;
- mt76x02_mac_fill_txwi(txwi, skb, sta, len, nss);
+ if (is_mt76x2(dev) && (info->flags & IEEE80211_TX_CTL_LDPC))
+ txwi->rate |= cpu_to_le16(MT_RXWI_RATE_LDPC);
+ if ((info->flags & IEEE80211_TX_CTL_STBC) && nss == 1)
+ txwi->rate |= cpu_to_le16(MT_RXWI_RATE_STBC);
+ if (nss > 1 && sta && sta->smps_mode == IEEE80211_SMPS_DYNAMIC)
+ txwi_flags |= MT_TXWI_FLAGS_MMPS;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+ txwi->ack_ctl |= MT_TXWI_ACK_CTL_REQ;
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+ txwi->ack_ctl |= MT_TXWI_ACK_CTL_NSEQ;
+ if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
+ txwi->pktid |= MT_TXWI_PKTID_PROBE;
+ if ((info->flags & IEEE80211_TX_CTL_AMPDU) && sta) {
+ u8 ba_size = IEEE80211_MIN_AMPDU_BUF;
+
+ ba_size <<= sta->ht_cap.ampdu_factor;
+ ba_size = min_t(int, 63, ba_size - 1);
+ if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
+ ba_size = 0;
+ txwi->ack_ctl |= FIELD_PREP(MT_TXWI_ACK_CTL_BA_WINDOW, ba_size);
+
+ txwi_flags |= MT_TXWI_FLAGS_AMPDU |
+ FIELD_PREP(MT_TXWI_FLAGS_MPDU_DENSITY,
+ sta->ht_cap.ampdu_density);
+ }
+
+ if (ieee80211_is_probe_resp(hdr->frame_control) ||
+ ieee80211_is_beacon(hdr->frame_control))
+ txwi_flags |= MT_TXWI_FLAGS_TS;
+
+ txwi->flags |= cpu_to_le16(txwi_flags);
+ txwi->len_ctl = cpu_to_le16(len);
}
EXPORT_SYMBOL_GPL(mt76x02_mac_write_txwi);
Disable ldpc coding for mt76x0 devices. Morover remove mt76x02_mac_fill_txwi routine since it is used just in mt76x02_mac_write_txwi Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> --- drivers/net/wireless/mediatek/mt76/mt76x02.h | 7 ++ .../net/wireless/mediatek/mt76/mt76x02_mac.c | 77 ++++++++----------- 2 files changed, 41 insertions(+), 43 deletions(-)