diff mbox series

[v2] mmc: core: Prevent processing SDIO IRQs when the card is suspended

Message ID 20190618120517.23123-1-ulf.hansson@linaro.org (mailing list archive)
State Not Applicable
Delegated to: Johannes Berg
Headers show
Series [v2] mmc: core: Prevent processing SDIO IRQs when the card is suspended | expand

Commit Message

Ulf Hansson June 18, 2019, 12:05 p.m. UTC 
Processing of SDIO IRQs must obviously be prevented while the card is
system suspended, otherwise we may end up trying to communicate with an
uninitialized SDIO card.

Reports throughout the years shows that this is not only a theoretical
problem, but a real issue. So, let's finally fix this problem, by keeping
track of the state for the card and bail out before processing the SDIO
IRQ, in case the card is suspended.

Cc: stable@vger.kernel.org
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---

Changes in v2:
	- Respect error code in mmc_sdio_suspend(), pointed out by Doug.

---
 drivers/mmc/core/sdio.c     | 13 ++++++++++++-
 drivers/mmc/core/sdio_irq.c |  4 ++++
 2 files changed, 16 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index d1aa1c7577bb..712a7742765e 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -937,6 +937,10 @@  static int mmc_sdio_pre_suspend(struct mmc_host *host)
  */
 static int mmc_sdio_suspend(struct mmc_host *host)
 {
+	/* Prevent processing of SDIO IRQs in suspended state. */
+	mmc_card_set_suspended(host->card);
+	cancel_delayed_work_sync(&host->sdio_irq_work);
+
 	mmc_claim_host(host);
 
 	if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
@@ -985,13 +989,20 @@  static int mmc_sdio_resume(struct mmc_host *host)
 		err = sdio_enable_4bit_bus(host->card);
 	}
 
-	if (!err && host->sdio_irqs) {
+	if (err)
+		goto out;
+
+	/* Allow SDIO IRQs to be processed again. */
+	mmc_card_clr_suspended(host->card);
+
+	if (host->sdio_irqs) {
 		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
 			wake_up_process(host->sdio_irq_thread);
 		else if (host->caps & MMC_CAP_SDIO_IRQ)
 			host->ops->enable_sdio_irq(host, 1);
 	}
 
+out:
 	mmc_release_host(host);
 
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 931e6226c0b3..9f54a259a1b3 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -34,6 +34,10 @@  static int process_sdio_pending_irqs(struct mmc_host *host)
 	unsigned char pending;
 	struct sdio_func *func;
 
+	/* Don't process SDIO IRQs if the card is suspended. */
+	if (mmc_card_suspended(card))
+		return 0;
+
 	/*
 	 * Optimization, if there is only 1 function interrupt registered
 	 * and we know an IRQ was signaled then call irq handler directly.