@@ -153,22 +153,22 @@ config IPVLAN_L3S
select NET_L3_MASTER_DEV
config IPVLAN
- tristate "IP-VLAN support"
- depends on INET
- depends on IPV6 || !IPV6
- ---help---
- This allows one to create virtual devices off of a main interface
- and packets will be delivered based on the dest L3 (IPv6/IPv4 addr)
- on packets. All interfaces (including the main interface) share L2
- making it transparent to the connected L2 switch.
+ tristate "IP-VLAN support"
+ depends on INET
+ depends on IPV6 || !IPV6
+ ---help---
+ This allows one to create virtual devices off of a main interface
+ and packets will be delivered based on the dest L3 (IPv6/IPv4 addr)
+ on packets. All interfaces (including the main interface) share L2
+ making it transparent to the connected L2 switch.
- Ipvlan devices can be added using the "ip" command from the
- iproute2 package starting with the iproute2-3.19 release:
+ Ipvlan devices can be added using the "ip" command from the
+ iproute2 package starting with the iproute2-3.19 release:
- "ip link add link <main-dev> [ NAME ] type ipvlan"
+ "ip link add link <main-dev> [ NAME ] type ipvlan"
- To compile this driver as a module, choose M here: the module
- will be called ipvlan.
+ To compile this driver as a module, choose M here: the module
+ will be called ipvlan.
config IPVTAP
tristate "IP-VLAN based tap driver"
@@ -185,11 +185,11 @@ config IPVTAP
will be called ipvtap.
config VXLAN
- tristate "Virtual eXtensible Local Area Network (VXLAN)"
- depends on INET
- select NET_UDP_TUNNEL
- select GRO_CELLS
- ---help---
+ tristate "Virtual eXtensible Local Area Network (VXLAN)"
+ depends on INET
+ select NET_UDP_TUNNEL
+ select GRO_CELLS
+ ---help---
This allows one to create vxlan virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. VXLAN is often used
to tunnel virtual network infrastructure in virtualized environments.
@@ -200,12 +200,12 @@ config VXLAN
will be called vxlan.
config GENEVE
- tristate "Generic Network Virtualization Encapsulation"
- depends on INET
- depends on IPV6 || !IPV6
- select NET_UDP_TUNNEL
- select GRO_CELLS
- ---help---
+ tristate "Generic Network Virtualization Encapsulation"
+ depends on INET
+ depends on IPV6 || !IPV6
+ select NET_UDP_TUNNEL
+ select GRO_CELLS
+ ---help---
This allows one to create geneve virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. GENEVE is often used
to tunnel virtual network infrastructure in virtualized environments.
@@ -244,8 +244,8 @@ config MACSEC
config NETCONSOLE
tristate "Network console logging support"
---help---
- If you want to log kernel messages over the network, enable this.
- See <file:Documentation/networking/netconsole.txt> for details.
+ If you want to log kernel messages over the network, enable this.
+ See <file:Documentation/networking/netconsole.txt> for details.
config NETCONSOLE_DYNAMIC
bool "Dynamic reconfiguration of logging targets"
@@ -362,12 +362,12 @@ config NET_VRF
support enables VRF devices.
config VSOCKMON
- tristate "Virtual vsock monitoring device"
- depends on VHOST_VSOCK
- ---help---
- This option enables a monitoring net device for vsock sockets. It is
- mostly intended for developers or support to debug vsock issues. If
- unsure, say N.
+ tristate "Virtual vsock monitoring device"
+ depends on VHOST_VSOCK
+ ---help---
+ This option enables a monitoring net device for vsock sockets. It is
+ mostly intended for developers or support to debug vsock issues. If
+ unsure, say N.
endif # NET_CORE
@@ -16,37 +16,37 @@ config CAIF_TTY
depends on CAIF && TTY
default n
---help---
- The CAIF TTY transport driver is a Line Discipline (ldisc)
- identified as N_CAIF. When this ldisc is opened from user space
- it will redirect the TTY's traffic into the CAIF stack.
+ The CAIF TTY transport driver is a Line Discipline (ldisc)
+ identified as N_CAIF. When this ldisc is opened from user space
+ it will redirect the TTY's traffic into the CAIF stack.
config CAIF_SPI_SLAVE
tristate "CAIF SPI transport driver for slave interface"
depends on CAIF && HAS_DMA
default n
---help---
- The CAIF Link layer SPI Protocol driver for Slave SPI interface.
- This driver implements a platform driver to accommodate for a
- platform specific SPI device. A sample CAIF SPI Platform device is
- provided in <file:Documentation/networking/caif/spi_porting.txt>.
+ The CAIF Link layer SPI Protocol driver for Slave SPI interface.
+ This driver implements a platform driver to accommodate for a
+ platform specific SPI device. A sample CAIF SPI Platform device is
+ provided in <file:Documentation/networking/caif/spi_porting.txt>.
config CAIF_SPI_SYNC
bool "Next command and length in start of frame"
depends on CAIF_SPI_SLAVE
default n
---help---
- Putting the next command and length in the start of the frame can
- help to synchronize to the next transfer in case of over or under-runs.
- This option also needs to be enabled on the modem.
+ Putting the next command and length in the start of the frame can
+ help to synchronize to the next transfer in case of over or under-runs.
+ This option also needs to be enabled on the modem.
config CAIF_HSI
- tristate "CAIF HSI transport driver"
- depends on CAIF
- default n
- ---help---
- The CAIF low level driver for CAIF over HSI.
- Be aware that if you enable this then you also need to
- enable a low-level HSI driver.
+ tristate "CAIF HSI transport driver"
+ depends on CAIF
+ default n
+ ---help---
+ The CAIF low level driver for CAIF over HSI.
+ Be aware that if you enable this then you also need to
+ enable a low-level HSI driver.
config CAIF_VIRTIO
tristate "CAIF virtio transport driver"
@@ -56,7 +56,7 @@ config CAIF_VIRTIO
select GENERIC_ALLOCATOR
default n
---help---
- The CAIF driver for CAIF over Virtio.
+ The CAIF driver for CAIF over Virtio.
if CAIF_VIRTIO
source "drivers/vhost/Kconfig.vringh"
@@ -1,9 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
config FS_ENET
- tristate "Freescale Ethernet Driver"
- depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
- select MII
- select PHYLIB
+ tristate "Freescale Ethernet Driver"
+ depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
+ select MII
+ select PHYLIB
config FS_ENET_MPC5121_FEC
def_bool y if (FS_ENET && PPC_MPC512x)
@@ -74,9 +74,9 @@ config IEEE802154_ATUSB
The module will be called 'atusb'.
config IEEE802154_ADF7242
- tristate "ADF7242 transceiver driver"
- depends on IEEE802154_DRIVERS && MAC802154
- depends on SPI
+ tristate "ADF7242 transceiver driver"
+ depends on IEEE802154_DRIVERS && MAC802154
+ depends on SPI
---help---
Say Y here to enable the ADF7242 SPI 802.15.4 wireless
controller.
@@ -107,9 +107,9 @@ config IEEE802154_CA8210_DEBUGFS
management entities.
config IEEE802154_MCR20A
- tristate "MCR20A transceiver driver"
- depends on IEEE802154_DRIVERS && MAC802154
- depends on SPI
+ tristate "MCR20A transceiver driver"
+ depends on IEEE802154_DRIVERS && MAC802154
+ depends on SPI
---help---
Say Y here to enable the MCR20A SPI 802.15.4 wireless
controller.
@@ -30,12 +30,12 @@ config ATH_DEBUG
Right now only ath9k makes use of this.
config ATH_TRACEPOINTS
- bool "Atheros wireless tracing"
- depends on ATH_DEBUG
- depends on EVENT_TRACING
- ---help---
- This option enables tracepoints for atheros wireless drivers.
- Currently, ath9k makes use of this facility.
+ bool "Atheros wireless tracing"
+ depends on ATH_DEBUG
+ depends on EVENT_TRACING
+ ---help---
+ This option enables tracepoints for atheros wireless drivers.
+ Currently, ath9k makes use of this facility.
config ATH_REG_DYNAMIC_USER_REG_HINTS
bool "Atheros dynamic user regulatory hints"
@@ -1,9 +1,9 @@
# SPDX-License-Identifier: ISC
config AR5523
- tristate "Atheros AR5523 wireless driver support"
- depends on MAC80211 && USB
- select ATH_COMMON
- select FW_LOADER
- ---help---
- This module add support for AR5523 based USB dongles such as D-Link
- DWL-G132, Netgear WPN111 and many more.
+ tristate "Atheros AR5523 wireless driver support"
+ depends on MAC80211 && USB
+ select ATH_COMMON
+ select FW_LOADER
+ ---help---
+ This module add support for AR5523 based USB dongles such as D-Link
+ DWL-G132, Netgear WPN111 and many more.
@@ -144,13 +144,13 @@ config ATH9K_RFKILL
a platform that can toggle the RF-Kill GPIO.
config ATH9K_CHANNEL_CONTEXT
- bool "Channel Context support"
- depends on ATH9K
- default n
- ---help---
- This option enables channel context support in ath9k, which is needed
- for multi-channel concurrency. Enable this if P2P PowerSave support
- is required.
+ bool "Channel Context support"
+ depends on ATH9K
+ default n
+ ---help---
+ This option enables channel context support in ath9k, which is needed
+ for multi-channel concurrency. Enable this if P2P PowerSave support
+ is required.
config ATH9K_PCOEM
bool "Atheros ath9k support for PC OEM cards" if EXPERT
@@ -162,32 +162,32 @@ config ATH9K_PCI_NO_EEPROM
depends on ATH9K_PCI
default n
help
- This separate driver provides a loader in order to support the
- AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have
- their initialization data (which contains the real PCI Device ID
- that ath9k will need) stored together with the calibration data out
- of reach for the ath9k chip.
+ This separate driver provides a loader in order to support the
+ AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have
+ their initialization data (which contains the real PCI Device ID
+ that ath9k will need) stored together with the calibration data out
+ of reach for the ath9k chip.
- These devices are usually various network appliances, routers or
- access Points and such.
+ These devices are usually various network appliances, routers or
+ access Points and such.
- If unsure say N.
+ If unsure say N.
config ATH9K_HTC
- tristate "Atheros HTC based wireless cards support"
- depends on USB && MAC80211
- select ATH9K_HW
- select MAC80211_LEDS
- select LEDS_CLASS
- select NEW_LEDS
- select ATH9K_COMMON
- ---help---
- Support for Atheros HTC based cards.
- Chipsets supported: AR9271
-
- For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
-
- The built module will be ath9k_htc.
+ tristate "Atheros HTC based wireless cards support"
+ depends on USB && MAC80211
+ select ATH9K_HW
+ select MAC80211_LEDS
+ select LEDS_CLASS
+ select NEW_LEDS
+ select ATH9K_COMMON
+ ---help---
+ Support for Atheros HTC based cards.
+ Chipsets supported: AR9271
+
+ For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
+
+ The built module will be ath9k_htc.
config ATH9K_HTC_DEBUGFS
bool "Atheros ath9k_htc debugging"
@@ -13,29 +13,29 @@ config WLAN_VENDOR_ATMEL
if WLAN_VENDOR_ATMEL
config ATMEL
- tristate "Atmel at76c50x chipset 802.11b support"
- depends on CFG80211 && (PCI || PCMCIA)
- select WIRELESS_EXT
- select WEXT_PRIV
- select FW_LOADER
- select CRC32
- ---help---
- A driver 802.11b wireless cards based on the Atmel fast-vnet
- chips. This driver supports standard Linux wireless extensions.
-
- Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
- one of these, you will need to provide a firmware image
- to be loaded into the card by the driver. The Atmel
- firmware package can be downloaded from
- <http://www.thekelleys.org.uk/atmel>
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on CFG80211 && (PCI || PCMCIA)
+ select WIRELESS_EXT
+ select WEXT_PRIV
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
config PCI_ATMEL
- tristate "Atmel at76c506 PCI cards"
- depends on ATMEL && PCI
- ---help---
- Enable support for PCI and mini-PCI cards containing the
- Atmel at76c506 chip.
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
config PCMCIA_ATMEL
tristate "Atmel at76c502/at76c504 PCMCIA cards"
@@ -95,20 +95,20 @@ config RT2800PCI_RT35XX
config RT2800PCI_RT53XX
- bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
- default y
- ---help---
- This adds support for rt53xx wireless chipset family to the
- rt2800pci driver.
- Supported chips: RT5390
+ bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
+ default y
+ ---help---
+ This adds support for rt53xx wireless chipset family to the
+ rt2800pci driver.
+ Supported chips: RT5390
config RT2800PCI_RT3290
- bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
- default y
- ---help---
- This adds support for rt3290 wireless chipset family to the
- rt2800pci driver.
- Supported chips: RT3290
+ bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
+ default y
+ ---help---
+ This adds support for rt3290 wireless chipset family to the
+ rt2800pci driver.
+ Supported chips: RT3290
endif
config RT2500USB
@@ -174,18 +174,18 @@ config RT2800USB_RT3573
in the rt2800usb driver.
config RT2800USB_RT53XX
- bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
- ---help---
- This adds support for rt53xx wireless chipset family to the
- rt2800usb driver.
- Supported chips: RT5370
+ bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
+ ---help---
+ This adds support for rt53xx wireless chipset family to the
+ rt2800usb driver.
+ Supported chips: RT5370
config RT2800USB_RT55XX
- bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)"
- ---help---
- This adds support for rt55xx wireless chipset family to the
- rt2800usb driver.
- Supported chips: RT5572
+ bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)"
+ ---help---
+ This adds support for rt55xx wireless chipset family to the
+ rt2800usb driver.
+ Supported chips: RT5572
config RT2800USB_UNKNOWN
bool "rt2800usb - Include support for unknown (USB) devices"
@@ -1,10 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
config WL12XX
- tristate "TI wl12xx support"
+ tristate "TI wl12xx support"
depends on MAC80211
- select WLCORE
- ---help---
+ select WLCORE
+ ---help---
This module adds support for wireless adapters based on TI wl1271,
wl1273, wl1281 and wl1283 chipsets. This module does *not* include
support for wl1251. For wl1251 support, use the separate homonymous
- driver instead.
+ driver instead.
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- drivers/net/Kconfig | 64 +++++++++---------- drivers/net/caif/Kconfig | 36 +++++------ .../net/ethernet/freescale/fs_enet/Kconfig | 8 +-- drivers/net/ieee802154/Kconfig | 12 ++-- drivers/net/wireless/ath/Kconfig | 12 ++-- drivers/net/wireless/ath/ar5523/Kconfig | 14 ++-- drivers/net/wireless/ath/ath9k/Kconfig | 58 ++++++++--------- drivers/net/wireless/atmel/Kconfig | 42 ++++++------ drivers/net/wireless/ralink/rt2x00/Kconfig | 44 ++++++------- drivers/net/wireless/ti/wl12xx/Kconfig | 8 +-- 10 files changed, 149 insertions(+), 149 deletions(-)