@@ -311,6 +311,7 @@ static const struct ieee80211_ops rt2800pci_mac80211_ops = {
.get_survey = rt2800_get_survey,
.get_ringparam = rt2x00mac_get_ringparam,
.tx_frames_pending = rt2x00mac_tx_frames_pending,
+ .reconfig_complete = rt2x00mac_reconfig_complete,
};
static const struct rt2800_ops rt2800pci_rt2800_ops = {
@@ -156,6 +156,7 @@ static const struct ieee80211_ops rt2800soc_mac80211_ops = {
.get_survey = rt2800_get_survey,
.get_ringparam = rt2x00mac_get_ringparam,
.tx_frames_pending = rt2x00mac_tx_frames_pending,
+ .reconfig_complete = rt2x00mac_reconfig_complete,
};
static const struct rt2800_ops rt2800soc_rt2800_ops = {
@@ -654,6 +654,7 @@ static const struct ieee80211_ops rt2800usb_mac80211_ops = {
.get_survey = rt2800_get_survey,
.get_ringparam = rt2x00mac_get_ringparam,
.tx_frames_pending = rt2x00mac_tx_frames_pending,
+ .reconfig_complete = rt2x00mac_reconfig_complete,
};
static const struct rt2800_ops rt2800usb_rt2800_ops = {
@@ -1439,6 +1439,8 @@ void rt2x00mac_tx(struct ieee80211_hw *hw,
struct sk_buff *skb);
int rt2x00mac_start(struct ieee80211_hw *hw);
void rt2x00mac_stop(struct ieee80211_hw *hw);
+void rt2x00mac_reconfig_complete(struct ieee80211_hw *hw,
+ enum ieee80211_reconfig_type reconfig_type);
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
@@ -1255,16 +1255,6 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
{
int retval = 0;
- if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) {
- /*
- * This is special case for ieee80211_restart_hw(), otherwise
- * mac80211 never call start() two times in row without stop();
- */
- set_bit(DEVICE_STATE_RESET, &rt2x00dev->flags);
- rt2x00dev->ops->lib->pre_reset_hw(rt2x00dev);
- rt2x00lib_stop(rt2x00dev);
- }
-
/*
* If this is the first interface which is added,
* we should load the firmware now.
@@ -1292,7 +1282,6 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
out:
- clear_bit(DEVICE_STATE_RESET, &rt2x00dev->flags);
return retval;
}
@@ -165,6 +165,15 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
return 0;
+ if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) {
+ /*
+ * This is special case for ieee80211_restart_hw(), otherwise
+ * mac80211 never call start() two times in row without stop();
+ */
+ set_bit(DEVICE_STATE_RESET, &rt2x00dev->flags);
+ rt2x00dev->ops->lib->pre_reset_hw(rt2x00dev);
+ rt2x00lib_stop(rt2x00dev);
+ }
return rt2x00lib_start(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00mac_start);
@@ -180,6 +189,17 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
}
EXPORT_SYMBOL_GPL(rt2x00mac_stop);
+void
+rt2x00mac_reconfig_complete(struct ieee80211_hw *hw,
+ enum ieee80211_reconfig_type reconfig_type)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+
+ if (reconfig_type == IEEE80211_RECONFIG_TYPE_RESTART)
+ clear_bit(DEVICE_STATE_RESET, &rt2x00dev->flags);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_reconfig_complete);
+
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
mac80211 has .reconfig_complete that can be used as indicator of HW restart end. This will allow to configure keys/IV differently for HW restart and normal configuration. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> --- drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 1 + drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 1 + drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 1 + drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 ++ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 11 ----------- drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 20 ++++++++++++++++++++ 6 files changed, 25 insertions(+), 11 deletions(-)