diff mbox series

[02/11] rtw88: fix TX secondary channel offset of 40M if current bw is 20M or 40M

Message ID 20191220092156.13443-3-yhchuang@realtek.com (mailing list archive)
State Accepted
Commit 73a2d0b83424f7150a1f607470dac67c95b8b2d4
Delegated to: Kalle Valo
Headers show
Series rtw88: some driver fixes | expand

Commit Message

Tony Chuang Dec. 20, 2019, 9:21 a.m. UTC 
From: Ping-Ke Shih <pkshih@realtek.com>

TX secondary channel offset is valid only if current bandwidth is 80M,
otherwise leave this value as zero. The wrong value of txsc40 causes
MAC unpredictable behavior.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/mac.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c
index 507970387b2a..ed9bb427ba60 100644
--- a/drivers/net/wireless/realtek/rtw88/mac.c
+++ b/drivers/net/wireless/realtek/rtw88/mac.c
@@ -16,10 +16,12 @@  void rtw_set_channel_mac(struct rtw_dev *rtwdev, u8 channel, u8 bw,
 	u8 value8;
 
 	txsc20 = primary_ch_idx;
-	if (txsc20 == 1 || txsc20 == 3)
-		txsc40 = 9;
-	else
-		txsc40 = 10;
+	if (bw == RTW_CHANNEL_WIDTH_80) {
+		if (txsc20 == 1 || txsc20 == 3)
+			txsc40 = 9;
+		else
+			txsc40 = 10;
+	}
 	rtw_write8(rtwdev, REG_DATA_SC,
 		   BIT_TXSC_20M(txsc20) | BIT_TXSC_40M(txsc40));