| Message ID | 20200423091856.24297-2-wgong@codeaurora.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | ath10k: sdio: add support for rx/tx bitrate reporting | expand |
Wen Gong <wgong@codeaurora.org> wrote: > For wmi tlv type, firmware disable peer stats info by default, after > enable it, firmware will report WMI_TLV_PEER_STATS_INFO_EVENTID if > ath10k send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware. > > Enable it will only set a flag in firmware, firmware will not report > it without receive request WMI command. > > Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042. > > Signed-off-by: Wen Gong <wgong@codeaurora.org> Fails to apply, please rebase. error: patch failed: drivers/net/wireless/ath/ath10k/core.h:502 error: drivers/net/wireless/ath/ath10k/core.h: patch does not apply error: patch failed: drivers/net/wireless/ath/ath10k/mac.c:8326 error: drivers/net/wireless/ath/ath10k/mac.c: patch does not apply stg import: Diff does not apply cleanly 4 patches set to Changes Requested. 11505367 [1/4] ath10k: enable firmware peer stats info for wmi tlv 11505377 [2/4] ath10k: add rx bitrate report for SDIO 11505371 [3/4] ath10k: add bitrate parse for peer stats info 11505369 [4/4] ath10k: correct tx bitrate of iw for SDIO
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6791c0035be0..47fd5035f000 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2959,6 +2959,11 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw, arvif->aid = bss_conf->aid; ether_addr_copy(arvif->bssid, bss_conf->bssid); + ret = ath10k_wmi_pdev_set_param(ar, + ar->wmi.pdev_param->peer_stats_info_enable, 1); + if (ret) + ath10k_warn(ar, "failed to enable peer stats info: %d\n", ret); + ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid); if (ret) { ath10k_warn(ar, "failed to set vdev %d up: %d\n", diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index e1ab900f2662..27aaa48615d2 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -4269,6 +4269,7 @@ static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = { .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, .rfkill_config = WMI_TLV_PDEV_PARAM_HW_RFKILL_CONFIG, .rfkill_enable = WMI_TLV_PDEV_PARAM_RFKILL_ENABLE, + .peer_stats_info_enable = WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE, }; static struct wmi_peer_param_map wmi_tlv_peer_param_map = { diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index 4972dc12991c..cd400b19a64d 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -451,6 +451,7 @@ enum wmi_tlv_pdev_param { WMI_TLV_PDEV_PARAM_VDEV_RATE_STATS_UPDATE_PERIOD, WMI_TLV_PDEV_PARAM_TXPOWER_REASON_NONE, WMI_TLV_PDEV_PARAM_TXPOWER_REASON_SAR, + WMI_TLV_PDEV_PARAM_PEER_STATS_INFO_ENABLE = 0x8b, WMI_TLV_PDEV_PARAM_TXPOWER_REASON_MAX, }; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 209070714d1a..46740e16f3ce 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -3798,6 +3798,7 @@ struct wmi_pdev_param_map { u32 enable_btcoex; u32 rfkill_config; u32 rfkill_enable; + u32 peer_stats_info_enable; }; #define WMI_PDEV_PARAM_UNSUPPORTED 0
For wmi tlv type, firmware disable peer stats info by default, after enable it, firmware will report WMI_TLV_PEER_STATS_INFO_EVENTID if ath10k send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware. Enable it will only set a flag in firmware, firmware will not report it without receive request WMI command. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042. Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/mac.c | 5 +++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 + drivers/net/wireless/ath/ath10k/wmi-tlv.h | 1 + drivers/net/wireless/ath/ath10k/wmi.h | 1 + 4 files changed, 8 insertions(+)