@@ -1317,7 +1317,12 @@ static int wcn36xx_smd_config_sta_v1(struct wcn36xx *wcn,
struct wcn36xx_hal_config_sta_req_msg_v1 msg_body;
struct wcn36xx_hal_config_sta_params_v1 *sta = &msg_body.sta_params;
- INIT_HAL_MSG(msg_body, WCN36XX_HAL_CONFIG_STA_REQ);
+ if (wcn->rf_id == RF_IRIS_WCN3680) {
+ INIT_HAL_MSG_V1(msg_body, WCN36XX_HAL_CONFIG_STA_REQ);
+ } else {
+ INIT_HAL_MSG(msg_body, WCN36XX_HAL_CONFIG_STA_REQ);
+ msg_body.header.len -= WCN36XX_DIFF_STA_PARAMS_V1_NOVHT;
+ }
wcn36xx_smd_convert_sta_to_v1(wcn, &orig->sta_params,
&msg_body.sta_params);
@@ -1388,7 +1393,12 @@ static int wcn36xx_smd_config_bss_v1(struct wcn36xx *wcn,
if (!msg_body)
return -ENOMEM;
- INIT_HAL_MSG((*msg_body), WCN36XX_HAL_CONFIG_BSS_REQ);
+ if (wcn->rf_id == RF_IRIS_WCN3680) {
+ INIT_HAL_MSG_V1((*msg_body), WCN36XX_HAL_CONFIG_BSS_REQ);
+ } else {
+ INIT_HAL_MSG((*msg_body), WCN36XX_HAL_CONFIG_BSS_REQ);
+ msg_body->header.len -= WCN36XX_DIFF_BSS_PARAMS_V1_NOVHT;
+ }
bss = &msg_body->bss_params;
sta = &bss->sta;
In order to send VHT parameters to wcn3680 we need to pass the extended V1 parameter structures to the firmware. These commands need to have the version number set to 1. This patch makes the conversion. The conversion consists of 1. Setting the version number for wcn3680 or leaving it at 0 otherwise 2. Setting the sizeo of the packet header lower for wcn3620 and wcn3660 Once done all three chips can continue to use the same code to pass parameters to their respective firmware. In the case of the wcn3680 the passed structures will be slightly larger to accommodate communication of VHT descriptors. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- drivers/net/wireless/ath/wcn36xx/smd.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)