diff mbox series

[v3,4/7] wcn36xx: Add wcn36xx_smd_set_sta_vht_params()

Message ID 20200908182437.2870281-5-bryan.odonoghue@linaro.org (mailing list archive)
State Superseded
Delegated to: Kalle Valo
Headers show
Series wcn36xx: Tidy up BSS/STA config | expand

Commit Message

Bryan O'Donoghue Sept. 8, 2020, 6:24 p.m. UTC 
This commit adds support for setting VHT parameters based on the declared
VHT capability bits in the VHT capability structure.

We cannot do 160MHz so VHT Channel width set should be zero.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 3f57acfe11bb..a563a30c3a0c 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -174,6 +174,28 @@  static void wcn36xx_smd_set_sta_ht_params(struct ieee80211_sta *sta,
 	}
 }
 
+void wcn36xx_smd_set_sta_vht_params(struct wcn36xx *wcn,
+		struct ieee80211_sta *sta,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params)
+{
+	if (sta->vht_cap.vht_supported) {
+		unsigned long caps = sta->vht_cap.cap;
+
+		sta_params->vht_capable = sta->vht_cap.vht_supported;
+		sta_params->vht_ldpc_enabled =
+			is_cap_supported(caps, IEEE80211_VHT_CAP_RXLDPC);
+		if (get_feat_caps(wcn->fw_feat_caps, MU_MIMO)) {
+			sta_params->vht_tx_mu_beamformee_capable =
+				is_cap_supported(caps, IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE);
+			if (sta_params->vht_tx_mu_beamformee_capable)
+			       sta_params->vht_tx_bf_enabled = 1;
+		} else {
+			sta_params->vht_tx_mu_beamformee_capable = 0;
+		}
+		sta_params->vht_tx_channel_width_set = 0;
+	}
+}
+
 static void wcn36xx_smd_set_sta_default_ht_params(
 		struct wcn36xx_hal_config_sta_params *sta_params)
 {