| Message ID | 20201215172435.5388-1-youghand@codeaurora.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | mac80211: Trigger disconnect for STA during recovery | expand |
On Tue, Dec 15, 2020 at 9:24 AM Youghandhar Chintala <youghand@codeaurora.org> wrote: > > From: Rakesh Pillai <pillair@codeaurora.org> > > Currently after the hardware restart triggered from the driver, > the station interface connection remains intact, since a disconnect > trigger is not sent to userspace. This can lead to a problem in > hardwares where the wifi mac sequence is added by the firmware. > > After the firmware restart, during subsytem recovery, the firmware > restarts its wifi mac sequence number. Hence AP to which our device > is connected will receive frames with a wifi mac sequence number jump > to the past, thereby resulting in the AP dropping all these frames, > until the frame arrives with a wifi mac sequence number which AP was > expecting. > > To avoid such frame drops, its better to trigger a station disconnect > upon the hardware restart. Indicate this support via a WIPHY flag > to mac80211, if the hardware params flag mentions the support to > add wifi mac sequence numbers for TX frames in the firmware. > > All the other hardwares, except WCN3990, are not affected by this > change, since the hardware params flag is not set for any hardware > except for WCN3990 > > Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 > Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 > Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048 > > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> > Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org> > --- > drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++++++++ > drivers/net/wireless/ath/ath10k/hw.h | 3 +++ > drivers/net/wireless/ath/ath10k/mac.c | 3 +++ > 3 files changed, 21 insertions(+) > > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c > index 796107b..4155f94 100644 > --- a/drivers/net/wireless/ath/ath10k/core.c > +++ b/drivers/net/wireless/ath/ath10k/core.c > @@ -90,6 +90,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { > .hw_filter_reset_required = true, > .fw_diag_ce_download = false, > .tx_stats_over_pktlog = true, > + .tx_mac_seq_by_fw = false, Probably orthogonal to this patch, there is a static array maintained for different hardware configs and the structure members like "tx_mac_seq_by_fw" are initialized. This does not seem to be scalable and probably these parameters can be auto populated based on FW capabilities and so we don't have to maintain the static array. Thoughts? -Abhishek
Abhishek Kumar <kuabhs@chromium.org> writes: > On Tue, Dec 15, 2020 at 9:24 AM Youghandhar Chintala > <youghand@codeaurora.org> wrote: >> >> From: Rakesh Pillai <pillair@codeaurora.org> >> >> Currently after the hardware restart triggered from the driver, >> the station interface connection remains intact, since a disconnect >> trigger is not sent to userspace. This can lead to a problem in >> hardwares where the wifi mac sequence is added by the firmware. >> >> After the firmware restart, during subsytem recovery, the firmware >> restarts its wifi mac sequence number. Hence AP to which our device >> is connected will receive frames with a wifi mac sequence number jump >> to the past, thereby resulting in the AP dropping all these frames, >> until the frame arrives with a wifi mac sequence number which AP was >> expecting. >> >> To avoid such frame drops, its better to trigger a station disconnect >> upon the hardware restart. Indicate this support via a WIPHY flag >> to mac80211, if the hardware params flag mentions the support to >> add wifi mac sequence numbers for TX frames in the firmware. >> >> All the other hardwares, except WCN3990, are not affected by this >> change, since the hardware params flag is not set for any hardware >> except for WCN3990 >> >> Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 >> Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 >> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048 >> >> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> >> Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org> >> --- >> drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++++++++ >> drivers/net/wireless/ath/ath10k/hw.h | 3 +++ >> drivers/net/wireless/ath/ath10k/mac.c | 3 +++ >> 3 files changed, 21 insertions(+) >> >> diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c >> index 796107b..4155f94 100644 >> --- a/drivers/net/wireless/ath/ath10k/core.c >> +++ b/drivers/net/wireless/ath/ath10k/core.c >> @@ -90,6 +90,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { >> .hw_filter_reset_required = true, >> .fw_diag_ce_download = false, >> .tx_stats_over_pktlog = true, >> + .tx_mac_seq_by_fw = false, > > Probably orthogonal to this patch, there is a static array maintained > for different hardware configs and the structure members like > "tx_mac_seq_by_fw" are initialized. This does not seem to be scalable > and probably these parameters can be auto populated based on FW > capabilities and so we don't have to maintain the static array. > Thoughts? I'm not sure what you mean. But if you are saying that we should move ath10k_hw_params_list entirely to firmware then that is a huge task as we would need to make changes in every firmware branch, and there are so many different branches that I have lost count. And due to backwards compatibility we still need to have ath10k_hw_params_list in ath10k for few years.
> I'm not sure what you mean. But if you are saying that we should move > ath10k_hw_params_list entirely to firmware then that is a huge task as > we would need to make changes in every firmware branch, and there are so > many different branches that I have lost count. And due to backwards > compatibility we still need to have ath10k_hw_params_list in ath10k for > few years. > Apologies for late reply on this thread. Yes you got me right( to move ath10k_hw_params_list entirely to firmware ). I wanted to trigger an idea and know what other people's views are, or atleast what are the challenges. As you said the task is much bigger with so many firmware branches. As long as you feel it is scalable for coming years, we should be good. As far as the patch is concerned, it LGTM. Reviewed-by: Abhishek Kumar <kuabhs@chromium.org> Thanks Abhishek
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 796107b..4155f94 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -90,6 +90,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = true, + .tx_mac_seq_by_fw = false, }, { .id = QCA988X_HW_2_0_VERSION, @@ -124,6 +125,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = true, + .tx_mac_seq_by_fw = false, }, { .id = QCA9887_HW_1_0_VERSION, @@ -159,6 +161,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA6174_HW_3_2_VERSION, @@ -187,6 +190,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .num_wds_entries = 0x20, .uart_pin_workaround = true, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, .bmi_large_size_download = true, .supports_peer_stats_info = true, }, @@ -223,6 +227,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA6174_HW_2_1_VERSION, @@ -257,6 +262,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA6174_HW_3_0_VERSION, @@ -291,6 +297,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA6174_HW_3_2_VERSION, @@ -328,6 +335,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = true, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, .supports_peer_stats_info = true, }, { @@ -369,6 +377,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA9984_HW_1_0_DEV_VERSION, @@ -416,6 +425,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA9888_HW_2_0_DEV_VERSION, @@ -460,6 +470,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA9377_HW_1_0_DEV_VERSION, @@ -494,6 +505,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA9377_HW_1_1_DEV_VERSION, @@ -530,6 +542,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = true, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = QCA9377_HW_1_1_DEV_VERSION, @@ -598,6 +611,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = true, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = false, }, { .id = WCN3990_HW_1_0_DEV_VERSION, @@ -625,6 +639,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .hw_filter_reset_required = false, .fw_diag_ce_download = false, .tx_stats_over_pktlog = false, + .tx_mac_seq_by_fw = true, }, }; diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index c6ded21..c146d02 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -623,6 +623,9 @@ struct ath10k_hw_params { /* provides bitrates for sta_statistics using WMI_TLV_PEER_STATS_INFO_EVENTID */ bool supports_peer_stats_info; + + /* tx mac seq num is added by FW */ + bool tx_mac_seq_by_fw; }; struct htt_rx_desc; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index dc32c78..6fe9cd6 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -9890,6 +9890,9 @@ int ath10k_mac_register(struct ath10k *ar) if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map)) ieee80211_hw_set(ar->hw, SUPPORTS_TDLS_BUFFER_STA); + if (ar->hw_params.tx_mac_seq_by_fw) + ar->hw->wiphy->flags |= WIPHY_FLAG_STA_DISCONNECT_ON_HW_RESTART; + ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; ar->hw->wiphy->max_remain_on_channel_duration = 5000;