@@ -485,6 +485,21 @@ struct ieee80211_supported_band {
const struct ieee80211_sband_iftype_data *iftype_data;
};
+/**
+ * struct cfg80211_multiple_bssid - AP settings for multi bssid
+ *
+ * @index: the index of this AP in the multi bssid group.
+ * @count: the total number of multi bssid peer APs.
+ * @parent: non-transmitted BSSs transmitted parents index
+ * @ema: Shall the beacons be sent out in EMA mode.
+ */
+struct cfg80211_multiple_bssid {
+ u8 index;
+ u8 count;
+ u32 parent;
+ bool ema;
+};
+
/**
* ieee80211_get_sband_iftype_data - return sband data for a given iftype
* @sband: the sband to search for the STA on
@@ -1032,6 +1047,23 @@ struct cfg80211_crypto_settings {
enum nl80211_sae_pwe_mechanism sae_pwe;
};
+/**
+ * struct cfg80211_multiple_bssid_data - Multiple BSSID elements
+ *
+ * @cnt: Number of elements in array %elems.
+ *
+ * @elems: Array of multiple BSSID element(s) to be added into Beacon frames.
+ * @elems.data: Data for multiple BSSID elements.
+ * @elems.len: Length of data.
+ */
+struct cfg80211_multiple_bssid_data {
+ u8 cnt;
+ struct {
+ u8 *data;
+ size_t len;
+ } elems[];
+};
+
/**
* struct cfg80211_beacon_data - beacon data
* @head: head portion of beacon (before TIM IE)
@@ -1058,6 +1090,7 @@ struct cfg80211_crypto_settings {
* Token (measurement type 11)
* @lci_len: LCI data length
* @civicloc_len: Civic location data length
+ * @multiple_bssid: multiple_bssid elements
*/
struct cfg80211_beacon_data {
const u8 *head, *tail;
@@ -1076,6 +1109,8 @@ struct cfg80211_beacon_data {
size_t probe_resp_len;
size_t lci_len;
size_t civicloc_len;
+
+ struct cfg80211_multiple_bssid_data *multiple_bssid;
};
struct mac_address {
@@ -1181,6 +1216,7 @@ enum cfg80211_ap_settings_flags {
* @he_oper: HE operation IE (or %NULL if HE isn't enabled)
* @fils_discovery: FILS discovery transmission parameters
* @unsol_bcast_probe_resp: Unsolicited broadcast probe response parameters
+ * @multiple_bssid: AP settings for multiple bssid.
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
@@ -1213,6 +1249,7 @@ struct cfg80211_ap_settings {
struct cfg80211_he_bss_color he_bss_color;
struct cfg80211_fils_discovery fils_discovery;
struct cfg80211_unsol_bcast_probe_resp unsol_bcast_probe_resp;
+ struct cfg80211_multiple_bssid multiple_bssid;
};
/**
@@ -4941,6 +4978,11 @@ struct wiphy_iftype_akm_suites {
* configuration through the %NL80211_TID_CONFIG_ATTR_RETRY_SHORT and
* %NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes
* @sar_capa: SAR control capabilities
+ *
+ * @multiple_bssid: Describes device's multiple BSSID config support
+ * @multiple_bssid.max_num_vaps: Maximum number of VAPS supported by the driver
+ * @multiple_bssid.max_profile_periodicity: Maximum EMA profile periodicity
+ * supported by the driver
*/
struct wiphy {
struct mutex mtx;
@@ -5083,6 +5125,11 @@ struct wiphy {
const struct cfg80211_sar_capa *sar_capa;
+ struct {
+ u8 max_num_vaps;
+ u8 max_profile_periodicity;
+ } multiple_bssid;
+
char priv[] __aligned(NETDEV_ALIGN);
};
@@ -2557,6 +2557,19 @@ enum nl80211_commands {
* disassoc events to indicate that an immediate reconnect to the AP
* is desired.
*
+ * @NL80211_ATTR_MULTIPLE_BSSID_CONFIG: Optional parameter to configure
+ * multiple BSSID and enhanced multi-BSSID advertisements.
+ * This attribute is also used to advertise the maximum number of VAPs
+ * supported by the driver to the application. It is a nested attribute,
+ * see &enum nl80211_multiple_bssid_config_attributes.
+ *
+ * @NL80211_ATTR_MULTIPLE_BSSID_ELEMS: Optional parameter for multiple BSSID
+ * elements data. This attribute is also used to advertise the maximum
+ * profile periodicity supported by the driver to the application, if
+ * enhanced multi-BSS advertisements (EMA) feature is enabled.
+ * It is a nested attribute, see
+ * &enum nl80211_multiple_bssid_elems_attributes.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3054,6 +3067,9 @@ enum nl80211_attrs {
NL80211_ATTR_DISABLE_HE,
+ NL80211_ATTR_MULTIPLE_BSSID_CONFIG,
+ NL80211_ATTR_MULTIPLE_BSSID_ELEMS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -5937,6 +5953,11 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
* configuration (AP/mesh) with HE rates.
*
+ * @NL80211_EXT_FEATURE_MULTIPLE_BSSID_AP: Driver/device supports multiple
+ * BSSID advertisements.
+ * @NL80211_EXT_FEATURE_EMA_AP: Driver/device supports enhanced multiple BSSID
+ * advertisements (EMA).
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5998,6 +6019,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_FILS_DISCOVERY,
NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
NL80211_EXT_FEATURE_BEACON_RATE_HE,
+ NL80211_EXT_FEATURE_MULTIPLE_BSSID_AP,
+ NL80211_EXT_FEATURE_EMA_AP,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -7277,4 +7300,65 @@ enum nl80211_sar_specs_attrs {
NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
};
+/**
+ * enum nl80211_multiple_bssid_config_attributes - Attributes to configure
+ * multiple BSSID and enhanced multi-BSSID advertisements.
+ *
+ * @__NL80211_MULTIPLE_BSSID_CONFIG_ATTR_INVALID: Invalid
+ *
+ * @NL80211_MULTIPLE_BSSID_CONFIG_ATTR_PARENT: For a non-transmitted BSSID, this
+ * attribute provides the interface index (u32) of the transmitted profile
+ * in the multiple BSSID set.
+ *
+ * @NL80211_MULTIPLE_BSSID_CONFIG_ATTR_INDEX: The index of this BSS (u8) inside
+ * multiple BSSID set.
+ *
+ * @NL80211_MULTIPLE_BSSID_CONFIG_ATTR_COUNT: Total number of BSSs (u8) in the
+ * multiple BSSID set.
+ *
+ * @NL80211_MULTIPLE_BSSID_CONFIG_ATTR_EMA: Flag to indicate if enhanced multi-BSSID
+ * advertisements (EMA) feature is enabled.
+ * If set to 1, elements provided through attribute
+ * %NL80211_ATTR_MULTIPLE_BSSID_ELEMS are split into multiple beacons.
+ * Otherwise, all elements will be included in every beacon.
+ *
+ * @__NL80211_MULTIPLE_BSSID_CONFIG_ATTR_LAST: Internal
+ * @NL80211_MULTIPLE_BSSID_CONFIG_ATTR_MAX: highest attribute
+ */
+enum nl80211_multiple_bssid_config_attributes {
+ __NL80211_MULTIPLE_BSSID_CONFIG_ATTR_INVALID,
+
+ NL80211_MULTIPLE_BSSID_CONFIG_ATTR_PARENT,
+ NL80211_MULTIPLE_BSSID_CONFIG_ATTR_INDEX,
+ NL80211_MULTIPLE_BSSID_CONFIG_ATTR_COUNT,
+ NL80211_MULTIPLE_BSSID_CONFIG_ATTR_EMA,
+
+ /* keep last */
+ __NL80211_MULTIPLE_BSSID_CONFIG_ATTR_LAST,
+ NL80211_MULTIPLE_BSSID_CONFIG_ATTR_MAX =
+ __NL80211_MULTIPLE_BSSID_CONFIG_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_multiple_bssid_elems_attributes - Attributes used to pass
+ * multiple BSSID elements data.
+ *
+ * @__NL80211_MULTIPLE_BSSID_ELEMS_ATTR_INVALID: Invalid
+ *
+ * @NL80211_MULTIPLE_BSSID_ELEMS_ATTR_COUNT: Number of multiple BSSID
+ * elements (u8).
+ *
+ * @NL80211_MULTIPLE_BSSID_ELEMS_ATTR_DATA: Array of multiple BSSID elements.
+ */
+enum nl80211_multiple_bssid_elems_attributes {
+ __NL80211_MULTIPLE_BSSID_ELEMS_ATTR_INVALID,
+
+ NL80211_MULTIPLE_BSSID_ELEMS_ATTR_COUNT,
+ NL80211_MULTIPLE_BSSID_ELEMS_ATTR_DATA,
+
+ __NL80211_MULTIPLE_BSSID_ELEMS_ATTR_LAST,
+ NL80211_MULTIPLE_BSSID_ELEMS_ATTR_MAX =
+ __NL80211_MULTIPLE_BSSID_ELEMS_ATTR_LAST - 1,
+};
+
#endif /* __LINUX_NL80211_H */
@@ -431,6 +431,20 @@ sar_policy[NL80211_SAR_ATTR_MAX + 1] = {
[NL80211_SAR_ATTR_SPECS] = NLA_POLICY_NESTED_ARRAY(sar_specs_policy),
};
+static const struct nla_policy
+nl80211_multiple_bssid_elems_policy[NL80211_MULTIPLE_BSSID_ELEMS_ATTR_MAX + 1] = {
+ [NL80211_MULTIPLE_BSSID_ELEMS_ATTR_COUNT] = { .type = NLA_U8 },
+ [NL80211_MULTIPLE_BSSID_ELEMS_ATTR_DATA] = { .type = NLA_NESTED },
+};
+
+static const struct nla_policy
+nl80211_multiple_bssid_policy[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_MAX + 1] = {
+ [NL80211_MULTIPLE_BSSID_CONFIG_ATTR_PARENT] = { .type = NLA_U32 },
+ [NL80211_MULTIPLE_BSSID_CONFIG_ATTR_INDEX] = { .type = NLA_U8 },
+ [NL80211_MULTIPLE_BSSID_CONFIG_ATTR_COUNT] = { .type = NLA_U8 },
+ [NL80211_MULTIPLE_BSSID_CONFIG_ATTR_EMA] = { .type = NLA_FLAG },
+};
+
static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[0] = { .strict_start_type = NL80211_ATTR_HE_OBSS_PD },
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
@@ -753,6 +767,10 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
[NL80211_ATTR_SAR_SPEC] = NLA_POLICY_NESTED(sar_policy),
[NL80211_ATTR_DISABLE_HE] = { .type = NLA_FLAG },
+ [NL80211_ATTR_MULTIPLE_BSSID_CONFIG] =
+ NLA_POLICY_NESTED(nl80211_multiple_bssid_policy),
+ [NL80211_ATTR_MULTIPLE_BSSID_ELEMS] =
+ NLA_POLICY_NESTED(nl80211_multiple_bssid_elems_policy),
};
/* policy for the key attributes */
@@ -2192,6 +2210,49 @@ nl80211_put_sar_specs(struct cfg80211_registered_device *rdev,
return -ENOBUFS;
}
+static int
+nl80211_put_multiple_bssid_support(struct wiphy *wiphy, struct sk_buff *msg)
+{
+ struct nlattr *config = NULL, *elems = NULL;
+
+ if (!wiphy_ext_feature_isset(wiphy,
+ NL80211_EXT_FEATURE_MULTIPLE_BSSID_AP))
+ return 0;
+
+ if (wiphy->multiple_bssid.max_num_vaps) {
+ config = nla_nest_start(msg,
+ NL80211_ATTR_MULTIPLE_BSSID_CONFIG);
+ if (!config)
+ return -ENOSPC;
+
+ if (nla_put_u8(msg, NL80211_MULTIPLE_BSSID_CONFIG_ATTR_COUNT,
+ wiphy->multiple_bssid.max_num_vaps))
+ goto fail_config;
+
+ nla_nest_end(msg, config);
+ }
+
+ if (wiphy_ext_feature_isset(wiphy, NL80211_EXT_FEATURE_EMA_AP) &&
+ wiphy->multiple_bssid.max_profile_periodicity) {
+ elems = nla_nest_start(msg, NL80211_ATTR_MULTIPLE_BSSID_ELEMS);
+ if (!elems)
+ goto fail_config;
+
+ if (nla_put_u8(msg, NL80211_MULTIPLE_BSSID_ELEMS_ATTR_COUNT,
+ wiphy->multiple_bssid.max_profile_periodicity))
+ goto fail_elems;
+
+ nla_nest_end(msg, elems);
+ }
+ return 0;
+
+fail_elems:
+ nla_nest_cancel(msg, elems);
+fail_config:
+ nla_nest_cancel(msg, config);
+ return -ENOBUFS;
+}
+
struct nl80211_dump_wiphy_state {
s64 filter_wiphy;
long start;
@@ -2774,6 +2835,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
if (nl80211_put_sar_specs(rdev, msg))
goto nla_put_failure;
+ if (nl80211_put_multiple_bssid_support(&rdev->wiphy, msg))
+ goto nla_put_failure;
+
/* done */
state->split_start = 0;
break;
@@ -4952,6 +5016,90 @@ static int validate_beacon_tx_rate(struct cfg80211_registered_device *rdev,
return 0;
}
+static int
+nl80211_parse_multiple_bssid_config(struct wiphy *wiphy,
+ struct nlattr *attrs,
+ struct cfg80211_ap_settings *params)
+{
+ struct nlattr *tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_MAX + 1];
+ int ret;
+ struct cfg80211_multiple_bssid *config = ¶ms->multiple_bssid;
+
+ if (!wiphy_ext_feature_isset(wiphy,
+ NL80211_EXT_FEATURE_MULTIPLE_BSSID_AP))
+ return -EINVAL;
+
+ ret = nla_parse_nested(tb, NL80211_MULTIPLE_BSSID_CONFIG_ATTR_MAX, attrs, NULL,
+ NULL);
+ if (ret)
+ return ret;
+
+ config->ema = nla_get_flag(tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_EMA]);
+ if (config->ema &&
+ (!wiphy_ext_feature_isset(wiphy,
+ NL80211_EXT_FEATURE_EMA_AP) ||
+ (wiphy->multiple_bssid.max_profile_periodicity &&
+ params->beacon.multiple_bssid->cnt >
+ wiphy->multiple_bssid.max_profile_periodicity)))
+ return -EINVAL;
+
+ if (!tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_COUNT])
+ return -EINVAL;
+
+ config->count = nla_get_u8(tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_COUNT]);
+ if (config->count < 1 ||
+ (wiphy->multiple_bssid.max_num_vaps &&
+ config->count > wiphy->multiple_bssid.max_num_vaps))
+ return -EINVAL;
+
+ if (tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_PARENT])
+ config->parent = nla_get_u32(tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_PARENT]);
+
+ if (tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_INDEX])
+ config->index = nla_get_u8(tb[NL80211_MULTIPLE_BSSID_CONFIG_ATTR_INDEX]);
+
+ return 0;
+}
+
+static struct cfg80211_multiple_bssid_data *
+nl80211_parse_multiple_bssid_elems(struct wiphy *wiphy, struct nlattr *attrs)
+{
+ struct cfg80211_multiple_bssid_data *multiple_bssid;
+ struct nlattr *nl_ie;
+ struct nlattr *tb[NL80211_MULTIPLE_BSSID_ELEMS_ATTR_MAX + 1];
+ int rem_ie;
+ u8 i = 0, err, num_elems;
+
+ if (!wiphy_ext_feature_isset(wiphy,
+ NL80211_EXT_FEATURE_MULTIPLE_BSSID_AP))
+ return NULL;
+
+ err = nla_parse_nested(tb, NL80211_MULTIPLE_BSSID_ELEMS_ATTR_MAX,
+ attrs, NULL, NULL);
+ if (err)
+ return NULL;
+
+ if (!tb[NL80211_MULTIPLE_BSSID_ELEMS_ATTR_COUNT] ||
+ !tb[NL80211_MULTIPLE_BSSID_ELEMS_ATTR_DATA])
+ return NULL;
+
+ num_elems = nla_get_u8(tb[NL80211_MULTIPLE_BSSID_ELEMS_ATTR_COUNT]);
+ multiple_bssid = kzalloc(struct_size(multiple_bssid, elems, num_elems),
+ GFP_KERNEL);
+ if (!multiple_bssid)
+ return NULL;
+
+ multiple_bssid->cnt = num_elems;
+ nla_for_each_nested(nl_ie, tb[NL80211_MULTIPLE_BSSID_ELEMS_ATTR_DATA],
+ rem_ie) {
+ multiple_bssid->elems[i].data = nla_data(nl_ie);
+ multiple_bssid->elems[i].len = nla_len(nl_ie);
+ i++;
+ }
+
+ return multiple_bssid;
+}
+
static int nl80211_parse_beacon(struct cfg80211_registered_device *rdev,
struct nlattr *attrs[],
struct cfg80211_beacon_data *bcn)
@@ -5032,6 +5180,14 @@ static int nl80211_parse_beacon(struct cfg80211_registered_device *rdev,
bcn->ftm_responder = -1;
}
+ if (attrs[NL80211_ATTR_MULTIPLE_BSSID_ELEMS]) {
+ bcn->multiple_bssid = nl80211_parse_multiple_bssid_elems(
+ &rdev->wiphy,
+ attrs[NL80211_ATTR_MULTIPLE_BSSID_ELEMS]);
+ if (!bcn->multiple_bssid)
+ return -EINVAL;
+ }
+
return 0;
}
@@ -5317,7 +5473,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
err = nl80211_parse_beacon(rdev, info->attrs, ¶ms.beacon);
if (err)
- return err;
+ goto out;
params.beacon_interval =
nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
@@ -5327,7 +5483,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
err = cfg80211_validate_beacon_int(rdev, dev->ieee80211_ptr->iftype,
params.beacon_interval);
if (err)
- return err;
+ goto out;
/*
* In theory, some of these attributes should be required here
@@ -5340,8 +5496,10 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
params.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
params.ssid_len =
nla_len(info->attrs[NL80211_ATTR_SSID]);
- if (params.ssid_len == 0)
- return -EINVAL;
+ if (params.ssid_len == 0) {
+ err = -EINVAL;
+ goto out;
+ }
}
if (info->attrs[NL80211_ATTR_HIDDEN_SSID])
@@ -5354,57 +5512,74 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
params.auth_type = nla_get_u32(
info->attrs[NL80211_ATTR_AUTH_TYPE]);
if (!nl80211_valid_auth_type(rdev, params.auth_type,
- NL80211_CMD_START_AP))
- return -EINVAL;
+ NL80211_CMD_START_AP)) {
+ err = -EINVAL;
+ goto out;
+ }
} else
params.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
err = nl80211_crypto_settings(rdev, info, ¶ms.crypto,
NL80211_MAX_NR_CIPHER_SUITES);
if (err)
- return err;
+ goto out;
if (info->attrs[NL80211_ATTR_INACTIVITY_TIMEOUT]) {
- if (!(rdev->wiphy.features & NL80211_FEATURE_INACTIVITY_TIMER))
- return -EOPNOTSUPP;
+ if (!(rdev->wiphy.features &
+ NL80211_FEATURE_INACTIVITY_TIMER)) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
params.inactivity_timeout = nla_get_u16(
info->attrs[NL80211_ATTR_INACTIVITY_TIMEOUT]);
}
if (info->attrs[NL80211_ATTR_P2P_CTWINDOW]) {
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
- return -EINVAL;
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
+ err = -EINVAL;
+ goto out;
+ }
params.p2p_ctwindow =
nla_get_u8(info->attrs[NL80211_ATTR_P2P_CTWINDOW]);
if (params.p2p_ctwindow != 0 &&
- !(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_CTWIN))
- return -EINVAL;
+ !(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_CTWIN)) {
+ err = -EINVAL;
+ goto out;
+ }
}
if (info->attrs[NL80211_ATTR_P2P_OPPPS]) {
u8 tmp;
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
- return -EINVAL;
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
+ err = -EINVAL;
+ goto out;
+ }
tmp = nla_get_u8(info->attrs[NL80211_ATTR_P2P_OPPPS]);
params.p2p_opp_ps = tmp;
if (params.p2p_opp_ps != 0 &&
- !(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_OPPPS))
- return -EINVAL;
+ !(rdev->wiphy.features & NL80211_FEATURE_P2P_GO_OPPPS)) {
+ err = -EINVAL;
+ goto out;
+ }
}
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
err = nl80211_parse_chandef(rdev, info, ¶ms.chandef);
if (err)
- return err;
+ goto out;
} else if (wdev->preset_chandef.chan) {
params.chandef = wdev->preset_chandef;
- } else if (!nl80211_get_ap_channel(rdev, ¶ms))
- return -EINVAL;
+ } else if (!nl80211_get_ap_channel(rdev, ¶ms)) {
+ err = -EINVAL;
+ goto out;
+ }
if (!cfg80211_reg_can_beacon_relax(&rdev->wiphy, ¶ms.chandef,
- wdev->iftype))
- return -EINVAL;
+ wdev->iftype)) {
+ err = -EINVAL;
+ goto out;
+ }
if (info->attrs[NL80211_ATTR_TX_RATES]) {
err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
@@ -5412,12 +5587,12 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
¶ms.beacon_rate,
dev, false);
if (err)
- return err;
+ goto out;
err = validate_beacon_tx_rate(rdev, params.chandef.chan->band,
¶ms.beacon_rate);
if (err)
- return err;
+ goto out;
}
if (info->attrs[NL80211_ATTR_SMPS_MODE]) {
@@ -5428,29 +5603,38 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
break;
case NL80211_SMPS_STATIC:
if (!(rdev->wiphy.features &
- NL80211_FEATURE_STATIC_SMPS))
- return -EINVAL;
+ NL80211_FEATURE_STATIC_SMPS)) {
+ err = -EINVAL;
+ goto out;
+ }
break;
case NL80211_SMPS_DYNAMIC:
if (!(rdev->wiphy.features &
- NL80211_FEATURE_DYNAMIC_SMPS))
- return -EINVAL;
+ NL80211_FEATURE_DYNAMIC_SMPS)) {
+ err = -EINVAL;
+ goto out;
+ }
break;
default:
- return -EINVAL;
+ err = -EINVAL;
+ goto out;
}
} else {
params.smps_mode = NL80211_SMPS_OFF;
}
params.pbss = nla_get_flag(info->attrs[NL80211_ATTR_PBSS]);
- if (params.pbss && !rdev->wiphy.bands[NL80211_BAND_60GHZ])
- return -EOPNOTSUPP;
+ if (params.pbss && !rdev->wiphy.bands[NL80211_BAND_60GHZ]) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
if (info->attrs[NL80211_ATTR_ACL_POLICY]) {
params.acl = parse_acl_data(&rdev->wiphy, info);
- if (IS_ERR(params.acl))
- return PTR_ERR(params.acl);
+ if (IS_ERR(params.acl)) {
+ err = PTR_ERR(params.acl);
+ goto out;
+ }
}
params.twt_responder =
@@ -5485,7 +5669,16 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
rdev, info->attrs[NL80211_ATTR_UNSOL_BCAST_PROBE_RESP],
¶ms);
if (err)
- return err;
+ goto out;
+ }
+
+ if (info->attrs[NL80211_ATTR_MULTIPLE_BSSID_CONFIG]) {
+ err = nl80211_parse_multiple_bssid_config(
+ &rdev->wiphy,
+ info->attrs[NL80211_ATTR_MULTIPLE_BSSID_CONFIG],
+ ¶ms);
+ if (err)
+ goto out;
}
nl80211_calculate_ap_params(¶ms);
@@ -5508,8 +5701,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
wdev_unlock(wdev);
out:
- kfree(params.acl);
-
+ if (!IS_ERR(params.acl))
+ kfree(params.acl);
+ kfree(params.beacon.multiple_bssid);
return err;
}
@@ -5533,12 +5727,14 @@ static int nl80211_set_beacon(struct sk_buff *skb, struct genl_info *info)
err = nl80211_parse_beacon(rdev, info->attrs, ¶ms);
if (err)
- return err;
+ goto out;
wdev_lock(wdev);
err = rdev_change_beacon(rdev, dev, ¶ms);
wdev_unlock(wdev);
+out:
+ kfree(params.multiple_bssid);
return err;
}
@@ -9218,12 +9414,14 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
err = nl80211_parse_beacon(rdev, info->attrs, ¶ms.beacon_after);
if (err)
- return err;
+ goto free;
csa_attrs = kcalloc(NL80211_ATTR_MAX + 1, sizeof(*csa_attrs),
GFP_KERNEL);
- if (!csa_attrs)
- return -ENOMEM;
+ if (!csa_attrs) {
+ err = -ENOMEM;
+ goto free;
+ }
err = nla_parse_nested_deprecated(csa_attrs, NL80211_ATTR_MAX,
info->attrs[NL80211_ATTR_CSA_IES],
@@ -9341,6 +9539,8 @@ static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info)
wdev_unlock(wdev);
free:
+ kfree(params.beacon_after.multiple_bssid);
+ kfree(params.beacon_csa.multiple_bssid);
kfree(csa_attrs);
return err;
}