@@ -11,9 +11,11 @@
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/pwrseq/driver.h>
+#include <linux/pwrseq/fallback.h>
#include <linux/regulator/consumer.h>
/* susclk rate */
@@ -369,5 +371,156 @@ static struct platform_driver pwrseq_qca_driver = {
},
};
-module_platform_driver(pwrseq_qca_driver);
+struct pwrseq_qca_fallback {
+ struct pwrseq_qca_one qca_one;
+ struct pwrseq_qca_common common;
+};
+
+static const struct of_device_id pwrseq_qca_bt_of_match[] = {
+ { .compatible = "qcom,qca6174-bt" },
+ { .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
+ { .compatible = "qcom,qca9377-bt" },
+ { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990 },
+ { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3990 },
+ { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998 },
+ { .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750 },
+ { /* sentinel */ },
+};
+
+static const struct qca_device_data qca_soc_data_wifi = {
+ .vregs = {
+ { "vdd-1.8-xo", 80000 },
+ { "vdd-1.3-rfa", 300000 },
+ { "vdd-3.3-ch0", 450000 },
+ { "vdd-3.3-ch1", 450000 },
+ },
+ .num_vregs = 4,
+};
+
+static const struct of_device_id pwrseq_qca_wifi_of_match[] = {
+ { .compatible = "qcom,wcn3990-wifi", .data = &qca_soc_data_wifi },
+ { /* sentinel */ }
+};
+
+static struct pwrseq * pwrseq_qca_fallback_get(struct device *dev)
+{
+ struct pwrseq_qca_fallback *fallback;
+ struct pwrseq *pwrseq;
+ const struct of_device_id *match;
+ const struct qca_device_data *data;
+ struct gpio_desc *gpiod;
+ int ret;
+
+ match = of_match_device(pwrseq_qca_bt_of_match, dev);
+ if (!match)
+ return ERR_PTR(-ENODEV);
+
+ data = match->data;
+ if (!data)
+ data = &qca_soc_data_default;
+
+ fallback = devm_kzalloc(dev, struct_size(fallback, common.vregs, data->num_vregs), GFP_KERNEL);
+ if (!data)
+ return ERR_PTR(-ENOMEM);
+
+ fallback->qca_one.common = &fallback->common;
+
+ ret = pwrseq_qca_common_init(dev, &fallback->common, data);
+ if (ret)
+ return ERR_PTR(ret);
+
+ if (data->has_enable_gpios) {
+ gpiod = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod))
+ return ERR_PTR(dev_err_probe(dev, PTR_ERR(gpiod), "failed to acquire enable GPIO\n"));
+ fallback->qca_one.enable = gpiod;
+ }
+
+ /* If we have no control over device's enablement, make sure that sleep clock is always running */
+ if (!fallback->common.vddio ||
+ !fallback->common.num_vregs ||
+ !fallback->qca_one.enable) {
+ ret = clk_set_rate(fallback->common.susclk, SUSCLK_RATE_32KHZ);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = clk_prepare_enable(fallback->common.susclk);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = devm_add_action_or_reset(dev, pwrseq_qca_unprepare_susclk, &fallback->common);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+
+ pwrseq = devm_pwrseq_create(dev, &pwrseq_qca_ops);
+ if (IS_ERR(pwrseq))
+ return pwrseq;
+
+ pwrseq_set_drvdata(pwrseq, &fallback->qca_one);
+
+ return pwrseq;
+}
+
+static struct pwrseq * pwrseq_qca_fallback_get_bt(struct device *dev, const char *id)
+{
+ if (strcmp(id, "bt"))
+ return ERR_PTR(-ENODEV);
+
+ return pwrseq_qca_fallback_get(dev);
+}
+
+static struct pwrseq * pwrseq_qca_fallback_get_wifi(struct device *dev, const char *id)
+{
+ if (strcmp(id, "wifi"))
+ return ERR_PTR(-ENODEV);
+
+ return pwrseq_qca_fallback_get(dev);
+}
+
+static struct pwrseq_fallback pwrseq_qca_fallback_bt = {
+ .get = pwrseq_qca_fallback_get_bt,
+ .of_match_table = pwrseq_qca_bt_of_match,
+};
+
+static struct pwrseq_fallback pwrseq_qca_fallback_wifi = {
+ .get = pwrseq_qca_fallback_get_wifi,
+ .of_match_table = pwrseq_qca_wifi_of_match,
+};
+
+static int __init pwrseq_qca_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&pwrseq_qca_driver);
+ if (ret)
+ return ret;
+
+ ret = pwrseq_fallback_register(&pwrseq_qca_fallback_bt);
+ if (ret)
+ goto err_bt;
+
+ ret = pwrseq_fallback_register(&pwrseq_qca_fallback_wifi);
+ if (ret)
+ goto err_wifi;
+
+ return 0;
+
+err_wifi:
+ pwrseq_fallback_unregister(&pwrseq_qca_fallback_bt);
+err_bt:
+ platform_driver_unregister(&pwrseq_qca_driver);
+
+ return ret;
+}
+module_init(pwrseq_qca_init);
+
+static void __exit pwrseq_qca_exit(void)
+{
+ pwrseq_fallback_unregister(&pwrseq_qca_fallback_wifi);
+ pwrseq_fallback_unregister(&pwrseq_qca_fallback_bt);
+ platform_driver_unregister(&pwrseq_qca_driver);
+}
+module_exit(pwrseq_qca_exit);
+
MODULE_LICENSE("GPL v2");
While we are waiting for all users of wcn399x-bt to be converted to the pwrseq declaration in the device tree, provide support for the pwrseq fallback: if the regulators are declared in the device itself, create pwrseq instance. This way the hci_qca driver doesn't have to cope with old and new dts bindings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/power/pwrseq/pwrseq_qca.c | 155 +++++++++++++++++++++++++++++- 1 file changed, 154 insertions(+), 1 deletion(-)