@@ -8,11 +8,11 @@ the filesystem. Instead, firmware can be looked for inside the kernel
directly. You can enable built-in firmware using the kernel configuration
options:
- * CONFIG_EXTRA_FIRMWARE
- * CONFIG_EXTRA_FIRMWARE_DIR
+ * CONFIG_FW_LOADER_BUILTIN_FILES
+ * CONFIG_FW_LOADER_BUILTIN_DIR
There are a few reasons why you might want to consider building your firmware
-into the kernel with CONFIG_EXTRA_FIRMWARE:
+into the kernel with CONFIG_FW_LOADER_BUILTIN_FILES:
* Speed
* Firmware is needed for accessing the boot device, and the user doesn't
@@ -114,13 +114,13 @@ Builtin microcode
=================
The loader supports also loading of a builtin microcode supplied through
-the regular builtin firmware method CONFIG_EXTRA_FIRMWARE. Only 64-bit is
-currently supported.
+the regular builtin firmware method using CONFIG_FW_LOADER_BUILTIN_FILES.
+Only 64-bit is currently supported.
Here's an example::
- CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
- CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
+ CONFIG_FW_LOADER_BUILTIN_FILES="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
+ CONFIG_FW_LOADER_BUILTIN_DIR="/lib/firmware"
This basically means, you have the following tree structure locally::
@@ -1305,8 +1305,8 @@ config MICROCODE
initrd for microcode blobs.
In addition, you can build the microcode into the kernel. For that you
- need to add the vendor-supplied microcode to the CONFIG_EXTRA_FIRMWARE
- config option.
+ need to add the vendor-supplied microcode to the configuration option
+ CONFIG_FW_LOADER_BUILTIN_FILES
config MICROCODE_INTEL
bool "Intel microcode loading support"
@@ -22,14 +22,14 @@ config FW_LOADER
You typically want this built-in (=y) but you can also enable this
as a module, in which case the firmware_class module will be built.
You also want to be sure to enable this built-in if you are going to
- enable built-in firmware (CONFIG_EXTRA_FIRMWARE).
+ enable built-in firmware (CONFIG_FW_LOADER_BUILTIN_FILES).
if FW_LOADER
config FW_LOADER_PAGED_BUF
bool
-config EXTRA_FIRMWARE
+config FW_LOADER_BUILTIN_FILES
string "Build named firmware blobs into the kernel binary"
help
Device drivers which require firmware can typically deal with
@@ -43,14 +43,21 @@ config EXTRA_FIRMWARE
in boot and cannot rely on the firmware being placed in an initrd or
initramfs.
- This option is a string and takes the (space-separated) names of the
+ Support for built-in firmware is not supported if you are using
+ the firmware loader as a module.
+
+ This option is a string and takes the space-separated names of the
firmware files -- the same names that appear in MODULE_FIRMWARE()
and request_firmware() in the source. These files should exist under
- the directory specified by the EXTRA_FIRMWARE_DIR option, which is
+ the directory specified by the FW_LOADER_BUILTIN_DIR option, which is
/lib/firmware by default.
- For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy
- the usb8388.bin file into /lib/firmware, and build the kernel. Then
+ For example, you might have set:
+
+ CONFIG_FW_LOADER_BUILTIN_FILES="usb8388.bin"
+
+ After this you would copy the usb8388.bin file into directory
+ specified by FW_LOADER_BUILTIN_DIR and build the kernel. Then
any request_firmware("usb8388.bin") will be satisfied internally
inside the kernel without ever looking at your filesystem at runtime.
@@ -60,13 +67,15 @@ config EXTRA_FIRMWARE
image since it combines both GPL and non-GPL work. You should
consult a lawyer of your own before distributing such an image.
-config EXTRA_FIRMWARE_DIR
- string "Firmware blobs root directory"
- depends on EXTRA_FIRMWARE != ""
+config FW_LOADER_BUILTIN_DIR
+ string "Directory with firmware to be built-in to the kernel"
+ depends on FW_LOADER_BUILTIN_FILES != ""
default "/lib/firmware"
help
- This option controls the directory in which the kernel build system
- looks for the firmware files listed in the EXTRA_FIRMWARE option.
+ This option specifies the directory which the kernel build system
+ will use to look for the firmware files which are going to be
+ built into the kernel using the space-separated
+ FW_LOADER_BUILTIN_FILES entries.
config FW_LOADER_USER_HELPER
bool "Enable the firmware sysfs fallback mechanism"
@@ -1,12 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += main.o
-# Create $(fwdir) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
+# Create $(fwdir) from $(CONFIG_FW_LOADER_BUILTIN_DIR) -- if it doesn't have a
# leading /, it's relative to $(srctree).
-fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR))
+fwdir := $(subst $(quote),,$(CONFIG_FW_LOADER_BUILTIN_DIR))
fwdir := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
-firmware := $(addsuffix .gen.o, $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE)))
+firmware := $(addsuffix .gen.o, $(subst $(quote),,$(CONFIG_FW_LOADER_BUILTIN_FILES)))
obj-y += $(firmware)
FWNAME = $(patsubst $(obj)/%.gen.S,%,$@)
@@ -31,8 +31,8 @@ config DVB_AV7110
or /lib/firmware (depending on configuration of firmware hotplug).
Alternatively, you can download the file and use the kernel's
- EXTRA_FIRMWARE configuration option to build it into your
- kernel image by adding the filename to the EXTRA_FIRMWARE
+ FW_LOADER_BUILTIN_FILES configuration option to build it into your
+ kernel image by adding the filename to the FW_LOADER_BUILTIN_FILES
configuration option string.
Say Y if you own such a card and want to use it.
Now that we've tied loose ends on the built-in firmware API, rename the kconfig symbols for it to reflect more that they are associated to the firmware_loader and to make it easier to understand what they are for. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> --- .../driver-api/firmware/built-in-fw.rst | 6 ++-- Documentation/x86/microcode.rst | 8 ++--- arch/x86/Kconfig | 4 +-- drivers/base/firmware_loader/Kconfig | 31 ++++++++++++------- drivers/base/firmware_loader/builtin/Makefile | 6 ++-- drivers/staging/media/av7110/Kconfig | 4 +-- 6 files changed, 34 insertions(+), 25 deletions(-)