From patchwork Wed Oct 27 17:03:05 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Li X-Patchwork-Id: 12587637 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2ED1FC433FE for ; Wed, 27 Oct 2021 17:03:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 16E1960F6F for ; Wed, 27 Oct 2021 17:03:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243198AbhJ0RGB (ORCPT ); Wed, 27 Oct 2021 13:06:01 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51654 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243183AbhJ0RF4 (ORCPT ); Wed, 27 Oct 2021 13:05:56 -0400 Received: from mail-io1-xd2c.google.com (mail-io1-xd2c.google.com [IPv6:2607:f8b0:4864:20::d2c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B2E16C061224 for ; Wed, 27 Oct 2021 10:03:30 -0700 (PDT) Received: by mail-io1-xd2c.google.com with SMTP id e144so4568521iof.3 for ; Wed, 27 Oct 2021 10:03:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=squareup.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=KS5UdkZMEdsSS7sRvW29mKpAHVC0RJgUbKs3rC8KkRA=; b=QCIATHeZUD0+8iQC0Uryon9qMumrpm3wA9rcxLO6jJcNr8EwP8SFcKLQvQWRrKAnp5 Ep2FT096SOaoZjHehOaYauW0Fo9oJ9Hm4FFVu6fErFA+lCV/uVKbcjbkOZippz3jslC3 09Bd38rzX/Od15pNHrdAcjfgL8taebm9/zQcI= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=KS5UdkZMEdsSS7sRvW29mKpAHVC0RJgUbKs3rC8KkRA=; b=SGQypdcxSaaA2bzkkhoN5fAryvphmwNn44+IMndG3W+OCYroq3yi6Lexh8ztUPGy/B og20VqibdzbOqPnr5JafNLNM3nI4+wh7DfabXJTtM+ok67CA2pBCjmFSngAF5x9ho9hG TDK8y1vI5r+mobCSdgtufAkBTnfnmFvQ8lSgwSvAKoIjrZ3DF6wg08OqO950uAdLKKJN 7qOlF6V6N67S3mTxxGtaGba5uCpb3lp8CIUM/o0TAvVpWQnim05G22T15szuztoNzeG2 zFSynh/G0zhbiY7slPP1kynFz4qDrXm/QJuXs5zpxfWdEeVDFUHVdiVoWq6dbkBP3qAZ XYKA== X-Gm-Message-State: AOAM532zk9tbfwcPvJ2PxJsN89Nti8AMO5QpOo71dot0hNuyAC0xSRKl 03CIqXJLrJU0QBiADiHu7wfw/Q== X-Google-Smtp-Source: ABdhPJwUsvq5sj/2Z+oqiMVE9ZasBnCzDky5j3uv7ukHPYOUHH+q0n7S3L0aoJqvP6zlbvAhOdhn0Q== X-Received: by 2002:a6b:b5c2:: with SMTP id e185mr7524258iof.127.1635354209659; Wed, 27 Oct 2021 10:03:29 -0700 (PDT) Received: from localhost ([2600:6c50:4d00:cd01::382]) by smtp.gmail.com with ESMTPSA id j22sm280170ila.6.2021.10.27.10.03.27 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Wed, 27 Oct 2021 10:03:29 -0700 (PDT) From: Benjamin Li To: Kalle Valo Cc: Joseph Gates , Bryan O'Donoghue , Loic Poulain , linux-arm-msm@vger.kernel.org, Benjamin Li , "David S. Miller" , Jakub Kicinski , Eugene Krasnikov , "John W. Linville" , wcn36xx@lists.infradead.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 3/3] wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan Date: Wed, 27 Oct 2021 10:03:05 -0700 Message-Id: <20211027170306.555535-4-benl@squareup.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20211027170306.555535-1-benl@squareup.com> References: <20211027170306.555535-1-benl@squareup.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org An SMD capture from the downstream prima driver on WCN3680B shows the following command sequence for connected scans: - init_scan_req - start_scan_req, channel 1 - end_scan_req, channel 1 - start_scan_req, channel 2 - ... - end_scan_req, channel 3 - finish_scan_req - init_scan_req - start_scan_req, channel 4 - ... - end_scan_req, channel 6 - finish_scan_req - ... - end_scan_req, channel 165 - finish_scan_req Upstream currently never calls wcn36xx_smd_end_scan, and in some cases[1] still sends finish_scan_req twice in a row or before init_scan_req. A typical connected scan looks like this: - init_scan_req - start_scan_req, channel 1 - finish_scan_req - init_scan_req - start_scan_req, channel 2 - ... - start_scan_req, channel 165 - finish_scan_req - finish_scan_req This patch cleans up scanning so that init/finish and start/end are always paired together and correctly nested. - init_scan_req - start_scan_req, channel 1 - end_scan_req, channel 1 - finish_scan_req - init_scan_req - start_scan_req, channel 2 - end_scan_req, channel 2 - ... - start_scan_req, channel 165 - end_scan_req, channel 165 - finish_scan_req Note that upstream will not do batching of 3 active-probe scans before returning to the operating channel, and this patch does not change that. To match downstream in this aspect, adjust IEEE80211_PROBE_DELAY and/or the 125ms max off-channel time in ieee80211_scan_state_decision. [1]: commit d195d7aac09b ("wcn36xx: Ensure finish scan is not requested before start scan") addressed one case of finish_scan_req being sent without a preceding init_scan_req (the case of the operating channel coinciding with the first scan channel); two other cases are: 1) if SW scan is started and aborted immediately, without scanning any channels, we send a finish_scan_req without ever sending init_scan_req, and 2) as SW scan logic always returns us to the operating channel before calling wcn36xx_sw_scan_complete, finish_scan_req is always sent twice at the end of a SW scan Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Benjamin Li Tested-by: Bryan O'Donoghue --- drivers/net/wireless/ath/wcn36xx/main.c | 34 +++++++++++++++++----- drivers/net/wireless/ath/wcn36xx/smd.c | 4 +++ drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 + 3 files changed, 32 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index 18383d0fc0933..37b4016f020c9 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -400,6 +400,7 @@ static void wcn36xx_change_opchannel(struct wcn36xx *wcn, int ch) static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed) { struct wcn36xx *wcn = hw->priv; + int ret; wcn36xx_dbg(WCN36XX_DBG_MAC, "mac config changed 0x%08x\n", changed); @@ -415,17 +416,31 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed) * want to receive/transmit regular data packets, then * simply stop the scan session and exit PS mode. */ - wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN, - wcn->sw_scan_vif); - wcn->sw_scan_channel = 0; + if (wcn->sw_scan_channel) + wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel); + if (wcn->sw_scan_init) { + wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN, + wcn->sw_scan_vif); + } } else if (wcn->sw_scan) { /* A scan is ongoing, do not change the operating * channel, but start a scan session on the channel. */ - wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN, - wcn->sw_scan_vif); + if (wcn->sw_scan_channel) + wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel); + if (!wcn->sw_scan_init) { + /* This can fail if we are unable to notify the + * operating channel. + */ + ret = wcn36xx_smd_init_scan(wcn, + HAL_SYS_MODE_SCAN, + wcn->sw_scan_vif); + if (ret) { + mutex_unlock(&wcn->conf_mutex); + return -EIO; + } + } wcn36xx_smd_start_scan(wcn, ch); - wcn->sw_scan_channel = ch; } else { wcn36xx_change_opchannel(wcn, ch); } @@ -723,7 +738,12 @@ static void wcn36xx_sw_scan_complete(struct ieee80211_hw *hw, wcn36xx_dbg(WCN36XX_DBG_MAC, "sw_scan_complete"); /* ensure that any scan session is finished */ - wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN, wcn->sw_scan_vif); + if (wcn->sw_scan_channel) + wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel); + if (wcn->sw_scan_init) { + wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN, + wcn->sw_scan_vif); + } wcn->sw_scan = false; wcn->sw_scan_opchannel = 0; } diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c index 3cecc8f9c9647..830341be72673 100644 --- a/drivers/net/wireless/ath/wcn36xx/smd.c +++ b/drivers/net/wireless/ath/wcn36xx/smd.c @@ -721,6 +721,7 @@ int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode, wcn36xx_err("hal_init_scan response failed err=%d\n", ret); goto out; } + wcn->sw_scan_init = true; out: mutex_unlock(&wcn->hal_mutex); return ret; @@ -751,6 +752,7 @@ int wcn36xx_smd_start_scan(struct wcn36xx *wcn, u8 scan_channel) wcn36xx_err("hal_start_scan response failed err=%d\n", ret); goto out; } + wcn->sw_scan_channel = scan_channel; out: mutex_unlock(&wcn->hal_mutex); return ret; @@ -781,6 +783,7 @@ int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel) wcn36xx_err("hal_end_scan response failed err=%d\n", ret); goto out; } + wcn->sw_scan_channel = 0; out: mutex_unlock(&wcn->hal_mutex); return ret; @@ -822,6 +825,7 @@ int wcn36xx_smd_finish_scan(struct wcn36xx *wcn, wcn36xx_err("hal_finish_scan response failed err=%d\n", ret); goto out; } + wcn->sw_scan_init = false; out: mutex_unlock(&wcn->hal_mutex); return ret; diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h index 1c8d918137da2..fbd0558c2c196 100644 --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h @@ -248,6 +248,7 @@ struct wcn36xx { struct cfg80211_scan_request *scan_req; bool sw_scan; u8 sw_scan_opchannel; + bool sw_scan_init; u8 sw_scan_channel; struct ieee80211_vif *sw_scan_vif; struct mutex scan_lock;