@@ -213,7 +213,7 @@ struct brcmnand_controller {
void __iomem *nand_base;
void __iomem *nand_fc; /* flash cache */
void __iomem *flash_dma_base;
- unsigned int irq;
+ int irq;
unsigned int dma_irq;
int nand_version;
@@ -1602,7 +1602,7 @@ static bool brcmstb_nand_wait_for_completion(struct nand_chip *chip)
bool err = false;
int sts;
- if (mtd->oops_panic_write) {
+ if (mtd->oops_panic_write || ctrl->irq < 0) {
/* switch to interrupt polling and PIO mode */
disable_ctrl_irqs(ctrl);
sts = bcmnand_ctrl_poll_status(ctrl, NAND_CTRL_RDY,
@@ -3130,33 +3130,29 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
}
/* IRQ */
- ctrl->irq = platform_get_irq(pdev, 0);
- if ((int)ctrl->irq < 0) {
- dev_err(dev, "no IRQ defined\n");
- ret = -ENODEV;
- goto err;
- }
-
- /*
- * Some SoCs integrate this controller (e.g., its interrupt bits) in
- * interesting ways
- */
- if (soc) {
- ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
- DRV_NAME, ctrl);
+ ctrl->irq = platform_get_irq_optional(pdev, 0);
+ if (ctrl->irq >= 0) {
+ /*
+ * Some SoCs integrate this controller (e.g., its interrupt bits) in
+ * interesting ways
+ */
+ if (soc) {
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
+ DRV_NAME, ctrl);
- /* Enable interrupt */
- ctrl->soc->ctlrdy_ack(ctrl->soc);
- ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
- } else {
- /* Use standard interrupt infrastructure */
- ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
- DRV_NAME, ctrl);
- }
- if (ret < 0) {
- dev_err(dev, "can't allocate IRQ %d: error %d\n",
- ctrl->irq, ret);
- goto err;
+ /* Enable interrupt */
+ ctrl->soc->ctlrdy_ack(ctrl->soc);
+ ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
+ } else {
+ /* Use standard interrupt infrastructure */
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
+ DRV_NAME, ctrl);
+ }
+ if (ret < 0) {
+ dev_err(dev, "can't allocate IRQ %d: error %d\n",
+ ctrl->irq, ret);
+ goto err;
+ }
}
for_each_available_child_of_node(dn, child) {
The BCMA devices include the brcmnand controller but they do not wire up any interrupt line, allow the main interrupt to be optional and update the completion path to also check for the lack of an interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 52 +++++++++++------------- 1 file changed, 24 insertions(+), 28 deletions(-)