@@ -5129,6 +5129,10 @@ struct wiphy_iftype_akm_suites {
* @ema_max_profile_periodicity: maximum profile periodicity supported by
* the driver. Setting this field to a non-zero value indicates that the
* driver supports enhanced multi-BSSID advertisements (EMA AP).
+ *
+ * @ru_punct_supp_bw: Whether the driver supports RU puncturing, and if so,
+ * for which bandwidths. See &enum nl80211_ru_punct_supp_bw for the
+ * possible values for this field.
*/
struct wiphy {
struct mutex mtx;
@@ -5276,6 +5280,8 @@ struct wiphy {
u8 mbssid_max_interfaces;
u8 ema_max_profile_periodicity;
+ enum nl80211_ru_punct_supp_bw ru_punct_supp_bw;
+
char priv[] __aligned(NETDEV_ALIGN);
};
@@ -2663,6 +2663,10 @@ enum nl80211_commands {
* association request when used with NL80211_CMD_NEW_STATION). Can be set
* only if %NL80211_STA_FLAG_WME is set.
*
+ * @NL80211_ATTR_RU_PUNCT_SUPP_BW: (u8) Minimum bandwidth for which
+ * the driver supports preamble puncturing, value should be of type
+ * &enum nl80211_ru_punct_supp_bw
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3175,6 +3179,8 @@ enum nl80211_attrs {
NL80211_ATTR_EHT_CAPABILITY,
+ NL80211_ATTR_RU_PUNCT_SUPP_BW,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -7600,4 +7606,20 @@ enum nl80211_ap_settings_flags {
NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
};
+/**
+ * enum nl80211_ru_punct_supp_bw - Bandwidths supporting preamble puncturing
+ *
+ * @NL80211_RU_PUNCT_NOT_SUPP: preamble puncturing is not supported
+ * @NL80211_RU_PUNCT_SUPP_BW_80: puncturing supported within channels of at
+ * least 80 MHz bandwidth
+ * @NL80211_RU_PUNCT_SUPP_BW_160: puncturing supported within channels of at
+ * least 160 MHz bandwidth
+ * @NL80211_RU_PUNCT_SUPP_BW_320: puncturing supported within 320 MHz.
+ */
+enum nl80211_ru_punct_supp_bw {
+ NL80211_RU_PUNCT_NOT_SUPP,
+ NL80211_RU_PUNCT_SUPP_BW_80,
+ NL80211_RU_PUNCT_SUPP_BW_160,
+ NL80211_RU_PUNCT_SUPP_BW_320,
+};
#endif /* __LINUX_NL80211_H */
@@ -892,6 +892,10 @@ int wiphy_register(struct wiphy *wiphy)
return -EINVAL;
}
+ if (WARN_ON(rdev->wiphy.ru_punct_supp_bw >
+ NL80211_RU_PUNCT_SUPP_BW_320))
+ return -EINVAL;
+
for (i = 0; i < rdev->wiphy.n_vendor_commands; i++) {
/*
* Validate we have a policy (can be explicitly set to
@@ -790,6 +790,8 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
NLA_POLICY_RANGE(NLA_BINARY,
NL80211_EHT_MIN_CAPABILITY_LEN,
NL80211_EHT_MAX_CAPABILITY_LEN),
+ [NL80211_ATTR_RU_PUNCT_SUPP_BW] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_RU_PUNCT_SUPP_BW_320),
};
/* policy for the key attributes */
@@ -2301,6 +2303,20 @@ static int nl80211_put_mbssid_support(struct wiphy *wiphy, struct sk_buff *msg)
return -ENOBUFS;
}
+static int
+nl80211_put_ru_punct_supp_bw(struct cfg80211_registered_device *rdev,
+ struct sk_buff *msg)
+{
+ if (!rdev->wiphy.ru_punct_supp_bw)
+ return 0;
+
+ if (nla_put_u8(msg, NL80211_ATTR_RU_PUNCT_SUPP_BW,
+ rdev->wiphy.ru_punct_supp_bw))
+ return -ENOBUFS;
+
+ return 0;
+}
+
struct nl80211_dump_wiphy_state {
s64 filter_wiphy;
long start;
@@ -2889,6 +2905,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
if (nl80211_put_mbssid_support(&rdev->wiphy, msg))
goto nla_put_failure;
+ if (nl80211_put_ru_punct_supp_bw(rdev, msg))
+ goto nla_put_failure;
+
/* done */
state->split_start = 0;
break;
RU preamble puncturing is allowed for bandwidths more that 80 MHz except 80+80. Drivers may not support puncturing at all or have restrictions for a minimum bandwidth. Add new attribute NL80211_ATTR_RU_PUNCT_SUPP_BW to advertise the driver support to the userspace. Default value (0) will indicate that RU puncturing is not supported. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> --- v2: Moved boundary check for ru_punct_supp_bw to wiphy_register(). include/net/cfg80211.h | 6 ++++++ include/uapi/linux/nl80211.h | 22 ++++++++++++++++++++++ net/wireless/core.c | 4 ++++ net/wireless/nl80211.c | 19 +++++++++++++++++++ 4 files changed, 51 insertions(+) base-commit: f5ba9781dde28f87d1e6db580ab63b308b5b5e1b