diff mbox series

brcmfmac: add 43439 SDIO ids and initialization

Message ID 20220827024903.617294-1-marex@denx.de (mailing list archive)
State Accepted
Commit be376df724aa3b7abdf79390eaab60c58a92f4f0
Delegated to: Kalle Valo
Headers show
Series brcmfmac: add 43439 SDIO ids and initialization | expand

Commit Message

Marek Vasut Aug. 27, 2022, 2:49 a.m. UTC 
Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
Add the firmware mapping structures for the CYW43439 chipset.
The 43439 needs some things setup similar to the 43430 chipset.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
To: linux-wireless@vger.kernel.org
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c    | 1 +
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c      | 5 ++++-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c   | 3 ++-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c      | 2 ++
 .../net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h    | 1 +
 include/linux/mmc/sdio_ids.h                                 | 1 +
 6 files changed, 11 insertions(+), 2 deletions(-)

Comments

Kalle Valo Aug. 31, 2022, 11:43 a.m. UTC | #1 
Marek Vasut <marex@denx.de> writes:

> Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
> Add the firmware mapping structures for the CYW43439 chipset.
> The 43439 needs some things setup similar to the 43430 chipset.
>
> Signed-off-by: Marek Vasut <marex@denx.de>

The title should be:

wifi: brcmfmac: add 43439 SDIO ids and initialization

I can fix that during commit.
Marek Vasut Aug. 31, 2022, 1:13 p.m. UTC | #2 
On 8/31/22 13:43, Kalle Valo wrote:
> Marek Vasut <marex@denx.de> writes:
> 
>> Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
>> Add the firmware mapping structures for the CYW43439 chipset.
>> The 43439 needs some things setup similar to the 43430 chipset.
>>
>> Signed-off-by: Marek Vasut <marex@denx.de>
> 
> The title should be:
> 
> wifi: brcmfmac: add 43439 SDIO ids and initialization
> 
> I can fix that during commit.

Please do, thank you.
Kalle Valo Sept. 7, 2022, 8:01 a.m. UTC | #3 
Marek Vasut <marex@denx.de> wrote:

> Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
> Add the firmware mapping structures for the CYW43439 chipset.
> The 43439 needs some things setup similar to the 43430 chipset.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Patch applied to wireless-next.git, thanks.

be376df724aa wifi: brcmfmac: add 43439 SDIO ids and initialization
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index d639bb8b51ae4..d0daef674e728 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -983,6 +983,7 @@  static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4359),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_4373),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012),
+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43439),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43752),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_89359),
 	{ /* end: all zeroes */ }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
index 4ec7773b69064..23295fceb0621 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
@@ -641,6 +641,7 @@  static void brcmf_chip_socram_ramsize(struct brcmf_core_priv *sr, u32 *ramsize,
 			*srsize = (32 * 1024);
 		break;
 	case BRCM_CC_43430_CHIP_ID:
+	case CY_CC_43439_CHIP_ID:
 		/* assume sr for now as we can not check
 		 * firmware sr capability at this point.
 		 */
@@ -1258,7 +1259,8 @@  brcmf_chip_cm3_set_passive(struct brcmf_chip_priv *chip)
 	brcmf_chip_resetcore(core, 0, 0, 0);
 
 	/* disable bank #3 remap for this device */
-	if (chip->pub.chip == BRCM_CC_43430_CHIP_ID) {
+	if (chip->pub.chip == BRCM_CC_43430_CHIP_ID ||
+	    chip->pub.chip == CY_CC_43439_CHIP_ID) {
 		sr = container_of(core, struct brcmf_core_priv, pub);
 		brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankidx), 3);
 		brcmf_chip_core_write32(sr, SOCRAMREGOFFS(bankpda), 0);
@@ -1416,6 +1418,7 @@  bool brcmf_chip_sr_capable(struct brcmf_chip *pub)
 		reg = chip->ops->read32(chip->ctx, addr);
 		return (reg & pmu_cc3_mask) != 0;
 	case BRCM_CC_43430_CHIP_ID:
+	case CY_CC_43439_CHIP_ID:
 		addr = CORE_CC_REG(base, sr_control1);
 		reg = chip->ops->read32(chip->ctx, addr);
 		return reg != 0;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index d2ac844e1e9ff..2c2f3e026c136 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -249,7 +249,8 @@  void brcmf_feat_attach(struct brcmf_pub *drvr)
 	memset(&gscan_cfg, 0, sizeof(gscan_cfg));
 	if (drvr->bus_if->chip != BRCM_CC_43430_CHIP_ID &&
 	    drvr->bus_if->chip != BRCM_CC_4345_CHIP_ID &&
-	    drvr->bus_if->chip != BRCM_CC_43454_CHIP_ID)
+	    drvr->bus_if->chip != BRCM_CC_43454_CHIP_ID &&
+	    drvr->bus_if->chip != CY_CC_43439_CHIP_ID)
 		brcmf_feat_iovar_data_set(ifp, BRCMF_FEAT_GSCAN,
 					  "pfn_gscan_cfg",
 					  &gscan_cfg, sizeof(gscan_cfg));
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 8968809399c7a..d7072009c47f1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -618,6 +618,7 @@  BRCMF_FW_DEF(43430A0, "brcmfmac43430a0-sdio");
 /* Note the names are not postfixed with a1 for backward compatibility */
 BRCMF_FW_CLM_DEF(43430A1, "brcmfmac43430-sdio");
 BRCMF_FW_DEF(43430B0, "brcmfmac43430b0-sdio");
+BRCMF_FW_CLM_DEF(43439, "brcmfmac43439-sdio");
 BRCMF_FW_CLM_DEF(43455, "brcmfmac43455-sdio");
 BRCMF_FW_DEF(43456, "brcmfmac43456-sdio");
 BRCMF_FW_CLM_DEF(4354, "brcmfmac4354-sdio");
@@ -657,6 +658,7 @@  static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
 	BRCMF_FW_ENTRY(BRCM_CC_4359_CHIP_ID, 0xFFFFFFFF, 4359),
 	BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373),
 	BRCMF_FW_ENTRY(CY_CC_43012_CHIP_ID, 0xFFFFFFFF, 43012),
+	BRCMF_FW_ENTRY(CY_CC_43439_CHIP_ID, 0xFFFFFFFF, 43439),
 	BRCMF_FW_ENTRY(CY_CC_43752_CHIP_ID, 0xFFFFFFFF, 43752)
 };
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
index ed0b707f0cdfc..1f225cdac9bdd 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcm_hw_ids.h
@@ -53,6 +53,7 @@ 
 #define BRCM_CC_4371_CHIP_ID		0x4371
 #define CY_CC_4373_CHIP_ID		0x4373
 #define CY_CC_43012_CHIP_ID		43012
+#define CY_CC_43439_CHIP_ID		43439
 #define CY_CC_43752_CHIP_ID		43752
 
 /* USB Device IDs */
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 53f0efa0bccf1..74f9d9a6d3307 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -74,6 +74,7 @@ 
 #define SDIO_DEVICE_ID_BROADCOM_43362		0xa962
 #define SDIO_DEVICE_ID_BROADCOM_43364		0xa9a4
 #define SDIO_DEVICE_ID_BROADCOM_43430		0xa9a6
+#define SDIO_DEVICE_ID_BROADCOM_CYPRESS_43439	0xa9af
 #define SDIO_DEVICE_ID_BROADCOM_43455		0xa9bf
 #define SDIO_DEVICE_ID_BROADCOM_CYPRESS_43752	0xaae8