@@ -384,7 +384,6 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD);
ieee80211_hw_set(hw, SUPPORTS_MULTI_BSSID);
ieee80211_hw_set(hw, WANT_MONITOR_VIF);
- ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
hw->max_tx_fragments = 4;
@@ -397,6 +396,9 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
}
if (phy->mt76->cap.has_5ghz) {
+ struct ieee80211_sta_vht_cap *vht_cap;
+
+ vht_cap = &phy->mt76->sband_5g.sband.vht_cap;
phy->mt76->sband_5g.sband.ht_cap.cap |=
IEEE80211_HT_CAP_LDPC_CODING |
IEEE80211_HT_CAP_MAX_AMSDU;
@@ -404,19 +406,28 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
IEEE80211_HT_MPDU_DENSITY_4;
if (is_mt7915(&dev->mt76)) {
- phy->mt76->sband_5g.sband.vht_cap.cap |=
+ vht_cap->cap |=
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
+
+ if (!dev->dbdc_support)
+ vht_cap->cap |=
+ IEEE80211_VHT_CAP_SHORT_GI_160 |
+ IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
+ FIELD_PREP(IEEE80211_VHT_CAP_EXT_NSS_BW_MASK, 1);
} else {
- phy->mt76->sband_5g.sband.vht_cap.cap |=
+ vht_cap->cap |=
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
/* mt7916 dbdc with 2g 2x2 bw40 and 5g 2x2 bw160c */
- phy->mt76->sband_5g.sband.vht_cap.cap |=
+ vht_cap->cap |=
IEEE80211_VHT_CAP_SHORT_GI_160 |
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
}
+
+ if (!is_mt7915(&dev->mt76) || !dev->dbdc_support)
+ ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
}
mt76_set_stream_caps(phy->mt76, true);
@@ -842,9 +853,13 @@ mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
int sts = hweight8(phy->mt76->chainmask);
u8 c, sts_160 = sts;
- /* mt7915 doesn't support bw160 */
- if (is_mt7915(&dev->mt76))
- sts_160 = 0;
+ /* Can do 1/2 of STS in 160Mhz mode for mt7915 */
+ if (is_mt7915(&dev->mt76)) {
+ if (!dev->dbdc_support)
+ sts_160 /= 2;
+ else
+ sts_160 = 0;
+ }
#ifdef CONFIG_MAC80211_MESH
if (vif == NL80211_IFTYPE_MESH_POINT)
@@ -945,10 +960,15 @@ mt7915_init_he_caps(struct mt7915_phy *phy, enum nl80211_band band,
int i, idx = 0, nss = hweight8(phy->mt76->antenna_mask);
u16 mcs_map = 0;
u16 mcs_map_160 = 0;
- u8 nss_160 = nss;
+ u8 nss_160;
- /* Can't do 160MHz with mt7915 */
- if (is_mt7915(&dev->mt76))
+ if (!is_mt7915(&dev->mt76))
+ nss_160 = nss;
+ else if (!dev->dbdc_support)
+ /* Can do 1/2 of NSS streams in 160Mhz mode for mt7915 */
+ nss_160 = nss / 2;
+ else
+ /* Can't do 160MHz with mt7915 dbdc */
nss_160 = 0;
for (i = 0; i < 8; i++) {
A number of users reported that this support was working fine before it got removed. Add it back, but leave out the unsupported 80+80 mode. Fixes: ac922bd60ace ("wifi: mt76: mt7915: remove BW160 and BW80+80 support") Signed-off-by: Felix Fietkau <nbd@nbd.name> --- .../net/wireless/mediatek/mt76/mt7915/init.c | 40 ++++++++++++++----- 1 file changed, 30 insertions(+), 10 deletions(-)