| Message ID | 20230315161817.29627-1-quic_mpubbise@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | e89a51aedf380bc60219dc9afa96c36507060fb3 |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | wifi: ath11k: Send 11d scan start before WMI_START_SCAN_CMDID | expand |
Manikanta Pubbisetty <quic_mpubbise@quicinc.com> wrote: > Firmwares advertising the support of triggering 11d algorithm on the > scan results of a regular scan expects driver to send > WMI_11D_SCAN_START_CMDID before sending WMI_START_SCAN_CMDID. > Triggering 11d algorithm on the scan results of a normal scan helps > in completely avoiding a separate 11d scan for determining regdomain. > This indirectly helps in speeding up connections on station > interfaces on the chipsets supporting 11D scan. > > To enable this feature, send WMI_11D_SCAN_START_CMDID just before > sending WMI_START_SCAN_CMDID if the firmware advertises > WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN service flag. > > WCN6750 & WCN6855 supports this feature. > > Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1 > Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 > > Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> > Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Patch applied to ath-next branch of ath.git, thanks. e89a51aedf38 wifi: ath11k: Send 11d scan start before WMI_START_SCAN_CMDID
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index cad832e0e6b8..be2e17b641d1 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -3755,6 +3755,18 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw, int i; u32 scan_timeout; + /* Firmwares advertising the support of triggering 11D algorithm + * on the scan results of a regular scan expects driver to send + * WMI_11D_SCAN_START_CMDID before sending WMI_START_SCAN_CMDID. + * With this feature, separate 11D scan can be avoided since + * regdomain can be determined with the scan results of the + * regular scan. + */ + if (ar->state_11d == ATH11K_11D_PREPARING && + test_bit(WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN, + ar->ab->wmi_ab.svc_map)) + ath11k_mac_11d_scan_start(ar, arvif->vdev_id); + mutex_lock(&ar->conf_mutex); spin_lock_bh(&ar->data_lock); diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index b23b7a22bc9a..21589d8efcc7 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -2102,6 +2102,7 @@ enum wmi_tlv_service { WMI_MAX_EXT_SERVICE = 256, WMI_TLV_SERVICE_REG_CC_EXT_EVENT_SUPPORT = 281, WMI_TLV_SERVICE_BIOS_SAR_SUPPORT = 326, + WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN = 357, /* The third 128 bits */ WMI_MAX_EXT2_SERVICE = 384
Firmwares advertising the support of triggering 11d algorithm on the scan results of a regular scan expects driver to send WMI_11D_SCAN_START_CMDID before sending WMI_START_SCAN_CMDID. Triggering 11d algorithm on the scan results of a normal scan helps in completely avoiding a separate 11d scan for determining regdomain. This indirectly helps in speeding up connections on station interfaces on the chipsets supporting 11D scan. To enable this feature, send WMI_11D_SCAN_START_CMDID just before sending WMI_START_SCAN_CMDID if the firmware advertises WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN service flag. WCN6750 & WCN6855 supports this feature. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/mac.c | 12 ++++++++++++ drivers/net/wireless/ath/ath11k/wmi.h | 1 + 2 files changed, 13 insertions(+) base-commit: 3df3715e556027e94246b2cb30986563362a65f4