diff mbox series

[v3,1/7] wifi: ath11k: driver settings for MBSSID and EMA

Message ID 20230405221648.17950-2-quic_alokad@quicinc.com (mailing list archive)
State Accepted
Commit a08dbb04d7365a04d52882143cf196005bfc88c3
Delegated to: Kalle Valo
Headers show
Series v3: ath11k: MBSSID and EMA support in AP mode. | expand

Commit Message

Aloka Dixit April 5, 2023, 10:16 p.m. UTC 
Advertise the driver support for multiple BSSID (MBSSID) and
enhanced multi-BSSID advertisements (EMA) by setting extended
capabilities.

Configure mbssid_max_interfaces and ema_max_profile_periodicity
fields in structure wiphy which are used to advertise maximum number
of interfaces and profile periodicity supported by the driver.

Add new WMI fields to configure maximum vdev count supported for
MBSSID and profile periodicity in case of EMA.
Setting WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET flag
indicates that the firmware should track and update the DTIM counts
for each non-transmitted profile.

Tested-on : IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
---
v3: Squashed patches 02/10 and 03/10 from v2 in this patch.
v2: Rebase only.

 drivers/net/wireless/ath/ath11k/hw.c  | 3 +++
 drivers/net/wireless/ath/ath11k/hw.h  | 1 +
 drivers/net/wireless/ath/ath11k/mac.c | 7 +++++++
 drivers/net/wireless/ath/ath11k/wmi.c | 3 +++
 drivers/net/wireless/ath/ath11k/wmi.h | 6 ++++++
 5 files changed, 20 insertions(+)

Comments

Kalle Valo May 9, 2023, 4:59 p.m. UTC | #1 
Aloka Dixit <quic_alokad@quicinc.com> wrote:

> Advertise the driver support for multiple BSSID (MBSSID) and
> enhanced multi-BSSID advertisements (EMA) by setting extended
> capabilities.
> 
> Configure mbssid_max_interfaces and ema_max_profile_periodicity
> fields in structure wiphy which are used to advertise maximum number
> of interfaces and profile periodicity supported by the driver.
> 
> Add new WMI fields to configure maximum vdev count supported for
> MBSSID and profile periodicity in case of EMA.
> Setting WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET flag
> indicates that the firmware should track and update the DTIM counts
> for each non-transmitted profile.
> 
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
> Co-developed-by: John Crispin <john@phrozen.org>
> Signed-off-by: John Crispin <john@phrozen.org>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

7 patches applied to ath-next branch of ath.git, thanks.

a08dbb04d736 wifi: ath11k: driver settings for MBSSID and EMA
5a81610acf66 wifi: ath11k: MBSSID configuration during vdev create/start
cf604e72bc6e wifi: ath11k: rename MBSSID fields in wmi_vdev_up_cmd
c82dc33f252f wifi: ath11k: MBSSID parameter configuration in AP mode
cb9bea773c85 wifi: ath11k: refactor vif parameter configurations
335a92765d30 wifi: ath11k: MBSSID beacon support
87bd40113816 wifi: ath11k: EMA beacon support
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 60ac215e0678..62c061b6b6fc 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -202,6 +202,9 @@  static void ath11k_init_wmi_config_ipq8074(struct ath11k_base *ab,
 	config->twt_ap_sta_count = 1000;
 	config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
 	config->flag1 |= WMI_RSRC_CFG_FLAG1_ACK_RSSI;
+	config->ema_max_vap_cnt = ab->num_radios;
+	config->ema_max_profile_period = TARGET_EMA_MAX_PROFILE_PERIOD;
+	config->beacon_tx_offload_max_vdev += config->ema_max_vap_cnt;
 }
 
 static int ath11k_hw_mac_id_to_pdev_id_ipq8074(struct ath11k_hw_params *hw,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 0be4e1232384..87dc8bafe3f3 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -64,6 +64,7 @@ 
 #define TARGET_NUM_WDS_ENTRIES		32
 #define TARGET_DMA_BURST_SIZE		1
 #define TARGET_RX_BATCHMODE		1
+#define TARGET_EMA_MAX_PROFILE_PERIOD	8
 
 #define ATH11K_HW_MAX_QUEUES		4
 #define ATH11K_QUEUE_LEN		4096
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index cad832e0e6b8..d95c1e7ac83d 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -8967,19 +8967,23 @@  static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
 
 static const u8 ath11k_if_types_ext_capa[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 };
 
 static const u8 ath11k_if_types_ext_capa_sta[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 	[9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT,
 };
 
 static const u8 ath11k_if_types_ext_capa_ap[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 	[9] = WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT,
+	[10] = WLAN_EXT_CAPA11_EMA_SUPPORT,
 };
 
 static const struct wiphy_iftype_ext_capab ath11k_iftypes_ext_capa[] = {
@@ -9217,6 +9221,9 @@  static int __ath11k_mac_register(struct ath11k *ar)
 		wiphy_ext_feature_set(ar->hw->wiphy,
 				      NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER);
 
+	ar->hw->wiphy->mbssid_max_interfaces = TARGET_NUM_VDEVS(ab);
+	ar->hw->wiphy->ema_max_profile_periodicity = TARGET_EMA_MAX_PROFILE_PERIOD;
+
 	ath11k_reg_init(ar);
 
 	if (!test_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags)) {
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 27f3fceb33c5..39b362f6a374 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -3980,6 +3980,9 @@  ath11k_wmi_copy_resource_config(struct wmi_resource_config *wmi_cfg,
 		~(1 << WMI_CFG_HOST_SERVICE_FLAG_REG_CC_EXT);
 	wmi_cfg->host_service_flags |= (tg_cfg->is_reg_cc_ext_event_supported <<
 					WMI_CFG_HOST_SERVICE_FLAG_REG_CC_EXT);
+	wmi_cfg->flags2 = WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET;
+	wmi_cfg->ema_max_vap_cnt = tg_cfg->ema_max_vap_cnt;
+	wmi_cfg->ema_max_profile_period = tg_cfg->ema_max_profile_period;
 }
 
 static int ath11k_init_cmd_send(struct ath11k_pdev_wmi *wmi,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index b23b7a22bc9a..b8671f88405c 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2315,6 +2315,7 @@  struct wmi_init_cmd {
 } __packed;
 
 #define WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 BIT(5)
+#define WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET BIT(9)
 #define WMI_RSRC_CFG_FLAG1_ACK_RSSI BIT(18)
 
 #define WMI_CFG_HOST_SERVICE_FLAG_REG_CC_EXT 4
@@ -2387,6 +2388,9 @@  struct wmi_resource_config {
 	u32 msdu_flow_override_config1;
 	u32 flags2;
 	u32 host_service_flags;
+	u32 max_rnr_neighbours;
+	u32 ema_max_vap_cnt;
+	u32 ema_max_profile_period;
 } __packed;
 
 struct wmi_service_ready_event {
@@ -5641,6 +5645,8 @@  struct target_resource_config {
 	u32 twt_ap_pdev_count;
 	u32 twt_ap_sta_count;
 	u8 is_reg_cc_ext_event_supported;
+	u32 ema_max_vap_cnt;
+	u32 ema_max_profile_period;
 };
 
 enum wmi_debug_log_param {