diff mbox series

[v2,4/4] wifi: ath11k: Allow ath11k to boot without caldata in ftm mode

Message ID 20230420113653.1686-5-quic_rajkbhag@quicinc.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series ath11k: factory test mode support | expand

Commit Message

Raj Kumar Bhagat April 20, 2023, 11:36 a.m. UTC 
From: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>

Currently, if ath11k is unable to load the calibration data file it will
always exit. However the calibration data may not be present in factory
test mode, so update the logic to allow the driver to execute in FTM mode
even if downloading the calibration data fails.

Tested-on : IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index ab923e24b0a9..0108edb8d2ba 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1,7 +1,7 @@ 
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/elf.h>
@@ -2457,6 +2457,14 @@  static int ath11k_qmi_load_bdf_qmi(struct ath11k_base *ab,
 
 		fw_entry = ath11k_core_firmware_request(ab, ATH11K_DEFAULT_CAL_FILE);
 		if (IS_ERR(fw_entry)) {
+			/* Caldata may not be present during first time calibration in
+			 * factory hence allow to boot without loading caldata in ftm mode
+			 */
+			if (ath11k_ftm_mode) {
+				ath11k_info(ab,
+					    "Booting without cal data file in FTM mode\n");
+				return 0;
+			}
 			ret = PTR_ERR(fw_entry);
 			ath11k_warn(ab,
 				    "qmi failed to load CAL data file:%s\n",