diff mbox series

[6/6,v2] wifi: libertas: prefer kstrtoX() for simple integer conversions

Message ID 20230725060531.72968-6-dmantipov@yandex.ru (mailing list archive)
State Accepted
Commit f5343efdf5b5d66844ce041e5dcd585ee5697747
Delegated to: Kalle Valo
Headers show
Series [1/6,v2] wifi: libertas: add missing calls to cancel_work_sync() | expand

Commit Message

Dmitry Antipov July 25, 2023, 6:04 a.m. UTC
Prefer 'kstrtoX()' family of functions over 'sscanf()' to convert
strings to integers and always check results of the conversions.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
---
 drivers/net/wireless/marvell/libertas/mesh.c | 51 +++++++++++++-------
 1 file changed, 33 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c
index 90ffe8d1e0e8..2dd635935448 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.c
+++ b/drivers/net/wireless/marvell/libertas/mesh.c
@@ -188,8 +188,11 @@  static ssize_t anycast_mask_store(struct device *dev,
 	uint32_t datum;
 	int ret;
 
+	ret = kstrtouint(buf, 16, &datum);
+	if (ret)
+		return ret;
+
 	memset(&mesh_access, 0, sizeof(mesh_access));
-	sscanf(buf, "%x", &datum);
 	mesh_access.data[0] = cpu_to_le32(datum);
 
 	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_ANYCAST, &mesh_access);
@@ -241,15 +244,14 @@  static ssize_t prb_rsp_limit_store(struct device *dev,
 	int ret;
 	unsigned long retry_limit;
 
-	memset(&mesh_access, 0, sizeof(mesh_access));
-	mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET);
-
 	ret = kstrtoul(buf, 10, &retry_limit);
 	if (ret)
 		return ret;
 	if (retry_limit > 15)
 		return -ENOTSUPP;
 
+	memset(&mesh_access, 0, sizeof(mesh_access));
+	mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET);
 	mesh_access.data[1] = cpu_to_le32(retry_limit);
 
 	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
@@ -285,9 +287,12 @@  static ssize_t lbs_mesh_store(struct device *dev,
 			      const char *buf, size_t count)
 {
 	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	int enable;
+	int ret, enable;
+
+	ret = kstrtoint(buf, 16, &enable);
+	if (ret)
+		return ret;
 
-	sscanf(buf, "%x", &enable);
 	enable = !!enable;
 	if (enable == !!priv->mesh_dev)
 		return count;
@@ -387,11 +392,13 @@  static ssize_t bootflag_store(struct device *dev, struct device_attribute *attr,
 	uint32_t datum;
 	int ret;
 
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 1))
+	ret = kstrtouint(buf, 10, &datum);
+	if (ret)
+		return ret;
+	if (datum > 1)
 		return -EINVAL;
 
+	memset(&cmd, 0, sizeof(cmd));
 	*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
 	cmd.length = cpu_to_le16(sizeof(uint32_t));
 	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
@@ -438,11 +445,14 @@  static ssize_t boottime_store(struct device *dev,
 	uint32_t datum;
 	int ret;
 
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 255))
+	ret = kstrtouint(buf, 10, &datum);
+	if (ret)
+		return ret;
+	if (datum > 255)
 		return -EINVAL;
 
+	memset(&cmd, 0, sizeof(cmd));
+
 	/* A too small boot time will result in the device booting into
 	 * standalone (no-host) mode before the host can take control of it,
 	 * so the change will be hard to revert.  This may be a desired
@@ -497,11 +507,13 @@  static ssize_t channel_store(struct device *dev, struct device_attribute *attr,
 	uint32_t datum;
 	int ret;
 
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if (ret != 1 || datum < 1 || datum > 11)
+	ret = kstrtouint(buf, 10, &datum);
+	if (ret)
+		return ret;
+	if (datum < 1 || datum > 11)
 		return -EINVAL;
 
+	memset(&cmd, 0, sizeof(cmd));
 	*((__le16 *)&cmd.data[0]) = cpu_to_le16(datum);
 	cmd.length = cpu_to_le16(sizeof(uint16_t));
 	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
@@ -626,11 +638,14 @@  static ssize_t protocol_id_store(struct device *dev,
 	uint32_t datum;
 	int ret;
 
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 255))
+	ret = kstrtouint(buf, 10, &datum);
+	if (ret)
+		return ret;
+	if (datum > 255)
 		return -EINVAL;
 
+	memset(&cmd, 0, sizeof(cmd));
+
 	/* fetch all other Information Element parameters */
 	ret = mesh_get_default_parameters(dev, &defs);