diff mbox series

[06/13] wifi: ath12k: Add logic to write QRTR node id to scratch

Message ID 20231030222700.18914-7-quic_rajkbhag@quicinc.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series wifi: ath12k: QCN9274 dualmac bring up | expand

Commit Message

Raj Kumar Bhagat Oct. 30, 2023, 10:26 p.m. UTC 
From: P Praneesh <quic_ppranees@quicinc.com>

Currently only one MHI device is registered successfully on platform
having two or more identical MHI devices. This is beacuse QMI service
runs with identical QRTR node ID. And, qrtr-lookup cannot register
more than one QMI service with identical node ID.

Hence, generate a unique QRTR instance ID from PCIe domain number and
bus number. QMI allows node id to be written on scratch register.
Add logic to write QRTR node id to the register. It is available for
firmware to uniquely identify an instance.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/pci.c | 33 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath12k/pci.h |  1 +
 drivers/net/wireless/ath/ath12k/qmi.h |  1 -
 3 files changed, 34 insertions(+), 1 deletion(-)

Comments

Jeff Johnson Oct. 30, 2023, 11:18 p.m. UTC | #1 
On 10/30/2023 3:26 PM, Raj Kumar Bhagat wrote:
> From: P Praneesh <quic_ppranees@quicinc.com>
> 
> Currently only one MHI device is registered successfully on platform
> having two or more identical MHI devices. This is beacuse QMI service
> runs with identical QRTR node ID. And, qrtr-lookup cannot register
> more than one QMI service with identical node ID.
> 
> Hence, generate a unique QRTR instance ID from PCIe domain number and
> bus number. QMI allows node id to be written on scratch register.
> Add logic to write QRTR node id to the register. It is available for
> firmware to uniquely identify an instance.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>

Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Kalle Valo Nov. 2, 2023, 3:33 p.m. UTC | #2 
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> writes:

> From: P Praneesh <quic_ppranees@quicinc.com>
>
> Currently only one MHI device is registered successfully on platform
> having two or more identical MHI devices. This is beacuse QMI service
> runs with identical QRTR node ID. And, qrtr-lookup cannot register
> more than one QMI service with identical node ID.
>
> Hence, generate a unique QRTR instance ID from PCIe domain number and
> bus number. QMI allows node id to be written on scratch register.
> Add logic to write QRTR node id to the register. It is available for
> firmware to uniquely identify an instance.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>

BTW we got a test report that this breaks WCN7850 support.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index 3006cd3fb..9567251d1 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -39,6 +39,10 @@ 
 #define QCN9274_DEVICE_ID		0x1109
 #define WCN7850_DEVICE_ID		0x1107
 
+#define PCIE_LOCAL_REG_QRTR_NODE_ID	0x1E03164
+#define DOMAIN_NUMBER_MASK		GENMASK(7, 4)
+#define BUS_NUMBER_MASK			GENMASK(3, 0)
+
 static const struct pci_device_id ath12k_pci_id_table[] = {
 	{ PCI_VDEVICE(QCOM, QCN9274_DEVICE_ID) },
 	{ PCI_VDEVICE(QCOM, WCN7850_DEVICE_ID) },
@@ -614,12 +618,19 @@  static void ath12k_pci_init_qmi_ce_config(struct ath12k_base *ab)
 {
 	struct ath12k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg;
 
+	struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
+	struct pci_bus *bus = ab_pci->pdev->bus;
+
 	cfg->tgt_ce = ab->hw_params->target_ce_config;
 	cfg->tgt_ce_len = ab->hw_params->target_ce_count;
 
 	cfg->svc_to_ce_map = ab->hw_params->svc_to_ce_map;
 	cfg->svc_to_ce_map_len = ab->hw_params->svc_to_ce_map_len;
 	ab->qmi.service_ins_id = ab->hw_params->qmi_service_ins_id;
+
+	ab_pci->qmi_instance = u32_encode_bits(pci_domain_nr(bus), DOMAIN_NUMBER_MASK) |
+			       u32_encode_bits(bus->number, BUS_NUMBER_MASK);
+	ab->qmi.service_ins_id += ab_pci->qmi_instance;
 }
 
 static void ath12k_pci_ce_irqs_enable(struct ath12k_base *ab)
@@ -800,6 +811,26 @@  static void ath12k_pci_aspm_disable(struct ath12k_pci *ab_pci)
 	set_bit(ATH12K_PCI_ASPM_RESTORE, &ab_pci->flags);
 }
 
+static void ath12k_pci_update_qrtr_node_id(struct ath12k_base *ab)
+{
+	struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
+	u32 reg;
+
+	/* On platforms with two or more identical mhi devices, qmi service run
+	 * with identical qrtr-node-id. Because of this identical ID qrtr-lookup
+	 * cannot register more than one qmi service with identical node ID.
+	 *
+	 * This generates a unique instance ID from PCIe domain number and bus number,
+	 * writes to the given register, it is available for firmware when the QMI service
+	 * is spawned.
+	 */
+	reg = PCIE_LOCAL_REG_QRTR_NODE_ID & WINDOW_RANGE_MASK;
+	ath12k_pci_write32(ab, reg, ab_pci->qmi_instance);
+
+	ath12k_dbg(ab, ATH12K_DBG_PCI, "pci reg 0x%x instance 0x%x read val 0x%x\n",
+		   reg, ab_pci->qmi_instance, ath12k_pci_read32(ab, reg));
+}
+
 static void ath12k_pci_aspm_restore(struct ath12k_pci *ab_pci)
 {
 	if (test_and_clear_bit(ATH12K_PCI_ASPM_RESTORE, &ab_pci->flags))
@@ -1113,6 +1144,8 @@  int ath12k_pci_power_up(struct ath12k_base *ab)
 
 	ath12k_pci_msi_enable(ab_pci);
 
+	ath12k_pci_update_qrtr_node_id(ab);
+
 	ret = ath12k_mhi_start(ab_pci);
 	if (ret) {
 		ath12k_err(ab, "failed to start mhi: %d\n", ret);
diff --git a/drivers/net/wireless/ath/ath12k/pci.h b/drivers/net/wireless/ath/ath12k/pci.h
index 0f24fd939..6d971a367 100644
--- a/drivers/net/wireless/ath/ath12k/pci.h
+++ b/drivers/net/wireless/ath/ath12k/pci.h
@@ -109,6 +109,7 @@  struct ath12k_pci {
 	unsigned long flags;
 	u16 link_ctl;
 	const struct ath12k_pci_ops *pci_ops;
+	u32 qmi_instance;
 };
 
 static inline struct ath12k_pci *ath12k_pci_priv(struct ath12k_base *ab)
diff --git a/drivers/net/wireless/ath/ath12k/qmi.h b/drivers/net/wireless/ath/ath12k/qmi.h
index e20d6511d..ee95299ab 100644
--- a/drivers/net/wireless/ath/ath12k/qmi.h
+++ b/drivers/net/wireless/ath/ath12k/qmi.h
@@ -15,7 +15,6 @@ 
 #define ATH12K_QMI_MAX_BDF_FILE_NAME_SIZE	64
 #define ATH12K_QMI_CALDB_ADDRESS		0x4BA00000
 #define ATH12K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01	128
-#define ATH12K_QMI_WLFW_NODE_ID_BASE		0x07
 #define ATH12K_QMI_WLFW_SERVICE_ID_V01		0x45
 #define ATH12K_QMI_WLFW_SERVICE_VERS_V01	0x01
 #define ATH12K_QMI_WLFW_SERVICE_INS_ID_V01	0x02