From patchwork Mon Dec 11 06:22:13 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Baochen Qiang X-Patchwork-Id: 13486697 X-Patchwork-Delegate: kvalo@adurom.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="BVVEQuGn" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E0DD3CD for ; Sun, 10 Dec 2023 22:22:42 -0800 (PST) Received: from pps.filterd (m0279871.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.24/8.17.1.24) with ESMTP id 3BB5X9H0010752; Mon, 11 Dec 2023 06:22:39 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= qcppdkim1; bh=Aj3VVYW2+w2MII64pCrTWIKr5Ai9SxRAbaPKSRg4GVk=; b=BV VEQuGnKv62Z2Hn5kKOADCIJgEZRCa3TIldU1FRdqpIcyO1u0MkUUobF+dLM0CQ5l A7SaWwslnS3PNHlmGEQugRwUdBgdZDWWReJKIV6kIBxEpZI77w7A4zKvPY5m9jiV lqA+7kzk6VK/URj98zvjI1W7cFSfC7R4qtSQMywML5LIac1rENrmOXIeRvEQsv+L 0bdZenQMGuM/x8XaOclE6Xvdz3ldtzRnekTa8vItvyUjd69r48f4q27SoyX2OYNM NKc6abIzmxcezAyymI9vnE9ZgjaEtQTwojji25YLUpnWhNsGaEN+7HkzoOe4gC5r QvF3wc764gY4Kdoj6s4Q== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uvnrg2d1d-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 11 Dec 2023 06:22:38 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3BB6MbTs004317 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 11 Dec 2023 06:22:37 GMT Received: from bqiang-Celadon-RN.qca.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.40; Sun, 10 Dec 2023 22:22:36 -0800 From: Baochen Qiang To: CC: Subject: [PATCH v9 09/12] wifi: ath11k: fill parameters for vdev set tpc power WMI command Date: Mon, 11 Dec 2023 14:22:13 +0800 Message-ID: <20231211062216.382164-10-quic_bqiang@quicinc.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20231211062216.382164-1-quic_bqiang@quicinc.com> References: <20231211062216.382164-1-quic_bqiang@quicinc.com> Precedence: bulk X-Mailing-List: linux-wireless@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: YBorpweWAvPj-rkv1stEtN3LKSgQ3Tud X-Proofpoint-ORIG-GUID: YBorpweWAvPj-rkv1stEtN3LKSgQ3Tud X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-09_02,2023-12-07_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 clxscore=1015 suspectscore=0 priorityscore=1501 impostorscore=0 lowpriorityscore=0 spamscore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2311290000 definitions=main-2312110051 From: Wen Gong Prepare the parameters which are needed for WMI command WMI_VDEV_SET_TPC_POWER_CMDID. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong Acked-by: Jeff Johnson Signed-off-by: Baochen Qiang --- v9: no change. v8: no change. v7: 1. s/is/are/ 2. remove oper_freq since not used. 3. remove repeated word: 'the'. drivers/net/wireless/ath/ath11k/mac.c | 276 ++++++++++++++++++++++++++ drivers/net/wireless/ath/ath11k/mac.h | 3 + 2 files changed, 279 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 7707aec48c1d..2520f78c9c0b 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -7661,6 +7661,282 @@ static u8 ath11k_mac_get_num_pwr_levels(struct cfg80211_chan_def *chan_def) } } +static u16 ath11k_mac_get_6ghz_start_frequency(struct cfg80211_chan_def *chan_def) +{ + u16 diff_seq; + + /* It is to get the lowest channel number's center frequency of the chan. + * For example, + * bandwidth=40 MHz, center frequency is 5965, lowest channel is 1 + * with center frequency 5955, its diff is 5965 - 5955 = 10. + * bandwidth=80 MHz, center frequency is 5985, lowest channel is 1 + * with center frequency 5955, its diff is 5985 - 5955 = 30. + * bandwidth=160 MHz, center frequency is 6025, lowest channel is 1 + * with center frequency 5955, its diff is 6025 - 5955 = 70. + */ + switch (chan_def->width) { + case NL80211_CHAN_WIDTH_160: + diff_seq = 70; + break; + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + diff_seq = 30; + break; + case NL80211_CHAN_WIDTH_40: + diff_seq = 10; + break; + default: + diff_seq = 0; + } + + return chan_def->center_freq1 - diff_seq; +} + +static u16 ath11k_mac_get_seg_freq(struct cfg80211_chan_def *chan_def, + u16 start_seq, u8 seq) +{ + u16 seg_seq; + + /* It is to get the center frequency of the specific bandwidth. + * start_seq means the lowest channel number's center frequency. + * seq 0/1/2/3 means 20 MHz/40 MHz/80 MHz/160 MHz&80P80. + * For example, + * lowest channel is 1, its center frequency 5955, + * center frequency is 5955 when bandwidth=20 MHz, its diff is 5955 - 5955 = 0. + * lowest channel is 1, its center frequency 5955, + * center frequency is 5965 when bandwidth=40 MHz, its diff is 5965 - 5955 = 10. + * lowest channel is 1, its center frequency 5955, + * center frequency is 5985 when bandwidth=80 MHz, its diff is 5985 - 5955 = 30. + * lowest channel is 1, its center frequency 5955, + * center frequency is 6025 when bandwidth=160 MHz, its diff is 6025 - 5955 = 70. + */ + if (chan_def->width == NL80211_CHAN_WIDTH_80P80 && seq == 3) + return chan_def->center_freq2; + + seg_seq = 10 * (BIT(seq) - 1); + return seg_seq + start_seq; +} + +static void ath11k_mac_get_psd_channel(struct ath11k *ar, + u16 step_freq, + u16 *start_freq, + u16 *center_freq, + u8 i, + struct ieee80211_channel **temp_chan, + s8 *tx_power) +{ + /* It is to get the center frequency for each 20 MHz. + * For example, if the chan is 160 MHz and center frequency is 6025, + * then it include 8 channels, they are 1/5/9/13/17/21/25/29, + * channel number 1's center frequency is 5955, it is parameter start_freq. + * parameter i is the step of the 8 channels. i is 0~7 for the 8 channels. + * the channel 1/5/9/13/17/21/25/29 maps i=0/1/2/3/4/5/6/7, + * and maps its center frequency is 5955/5975/5995/6015/6035/6055/6075/6095, + * the gap is 20 for each channel, parameter step_freq means the gap. + * after get the center frequency of each channel, it is easy to find the + * struct ieee80211_channel of it and get the max_reg_power. + */ + *center_freq = *start_freq + i * step_freq; + *temp_chan = ieee80211_get_channel(ar->hw->wiphy, *center_freq); + *tx_power = (*temp_chan)->max_reg_power; +} + +static void ath11k_mac_get_eirp_power(struct ath11k *ar, + u16 *start_freq, + u16 *center_freq, + u8 i, + struct ieee80211_channel **temp_chan, + struct cfg80211_chan_def *def, + s8 *tx_power) +{ + /* It is to get the center frequency for 20 MHz/40 MHz/80 MHz/ + * 160 MHz&80P80 bandwidth, and then plus 10 to the center frequency, + * it is the center frequency of a channel number. + * For example, when configured channel number is 1. + * center frequency is 5965 when bandwidth=40 MHz, after plus 10, it is 5975, + * then it is channel number 5. + * center frequency is 5985 when bandwidth=80 MHz, after plus 10, it is 5995, + * then it is channel number 9. + * center frequency is 6025 when bandwidth=160 MHz, after plus 10, it is 6035, + * then it is channel number 17. + * after get the center frequency of each channel, it is easy to find the + * struct ieee80211_channel of it and get the max_reg_power. + */ + *center_freq = ath11k_mac_get_seg_freq(def, *start_freq, i); + + /* For the 20 MHz, its center frequency is same with same channel */ + if (i != 0) + *center_freq += 10; + + *temp_chan = ieee80211_get_channel(ar->hw->wiphy, *center_freq); + *tx_power = (*temp_chan)->max_reg_power; +} + +void ath11k_mac_fill_reg_tpc_info(struct ath11k *ar, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx) +{ + struct ath11k_base *ab = ar->ab; + struct ath11k_vif *arvif = (void *)vif->drv_priv; + struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; + struct ath11k_reg_tpc_power_info *reg_tpc_info = &arvif->reg_tpc_info; + struct ieee80211_channel *chan, *temp_chan; + u8 pwr_lvl_idx, num_pwr_levels, pwr_reduction; + bool is_psd_power = false, is_tpe_present = false; + s8 max_tx_power[IEEE80211_MAX_NUM_PWR_LEVEL], + psd_power, tx_power, eirp_power; + u16 start_freq, center_freq; + + chan = ctx->def.chan; + start_freq = ath11k_mac_get_6ghz_start_frequency(&ctx->def); + pwr_reduction = bss_conf->pwr_reduction; + + if (arvif->reg_tpc_info.num_pwr_levels) { + is_tpe_present = true; + num_pwr_levels = arvif->reg_tpc_info.num_pwr_levels; + } else { + num_pwr_levels = ath11k_mac_get_num_pwr_levels(&ctx->def); + } + + for (pwr_lvl_idx = 0; pwr_lvl_idx < num_pwr_levels; pwr_lvl_idx++) { + /* STA received TPE IE*/ + if (is_tpe_present) { + /* local power is PSD power*/ + if (chan->flags & IEEE80211_CHAN_PSD) { + /* Connecting AP is psd power */ + if (reg_tpc_info->is_psd_power) { + is_psd_power = true; + ath11k_mac_get_psd_channel(ar, 20, + &start_freq, + ¢er_freq, + pwr_lvl_idx, + &temp_chan, + &tx_power); + psd_power = temp_chan->psd; + eirp_power = tx_power; + max_tx_power[pwr_lvl_idx] = + min_t(s8, + psd_power, + reg_tpc_info->tpe[pwr_lvl_idx]); + /* Connecting AP is not psd power */ + } else { + ath11k_mac_get_eirp_power(ar, + &start_freq, + ¢er_freq, + pwr_lvl_idx, + &temp_chan, + &ctx->def, + &tx_power); + psd_power = temp_chan->psd; + /* convert psd power to EIRP power based + * on channel width + */ + tx_power = + min_t(s8, tx_power, + psd_power + 13 + pwr_lvl_idx * 3); + max_tx_power[pwr_lvl_idx] = + min_t(s8, + tx_power, + reg_tpc_info->tpe[pwr_lvl_idx]); + } + /* local power is not PSD power */ + } else { + /* Connecting AP is psd power */ + if (reg_tpc_info->is_psd_power) { + is_psd_power = true; + ath11k_mac_get_psd_channel(ar, 20, + &start_freq, + ¢er_freq, + pwr_lvl_idx, + &temp_chan, + &tx_power); + eirp_power = tx_power; + max_tx_power[pwr_lvl_idx] = + reg_tpc_info->tpe[pwr_lvl_idx]; + /* Connecting AP is not psd power */ + } else { + ath11k_mac_get_eirp_power(ar, + &start_freq, + ¢er_freq, + pwr_lvl_idx, + &temp_chan, + &ctx->def, + &tx_power); + max_tx_power[pwr_lvl_idx] = + min_t(s8, + tx_power, + reg_tpc_info->tpe[pwr_lvl_idx]); + } + } + /* STA not received TPE IE */ + } else { + /* local power is PSD power*/ + if (chan->flags & IEEE80211_CHAN_PSD) { + is_psd_power = true; + ath11k_mac_get_psd_channel(ar, 20, + &start_freq, + ¢er_freq, + pwr_lvl_idx, + &temp_chan, + &tx_power); + psd_power = temp_chan->psd; + eirp_power = tx_power; + max_tx_power[pwr_lvl_idx] = psd_power; + } else { + ath11k_mac_get_eirp_power(ar, + &start_freq, + ¢er_freq, + pwr_lvl_idx, + &temp_chan, + &ctx->def, + &tx_power); + max_tx_power[pwr_lvl_idx] = tx_power; + } + } + + if (is_psd_power) { + /* If AP local power constraint is present */ + if (pwr_reduction) + eirp_power = eirp_power - pwr_reduction; + + /* If firmware updated max tx power is non zero, then take + * the min of firmware updated ap tx power + * and max power derived from above mentioned parameters. + */ + ath11k_dbg(ab, ATH11K_DBG_MAC, + "eirp power : %d firmware report power : %d\n", + eirp_power, ar->max_allowed_tx_power); + if (ar->max_allowed_tx_power) + eirp_power = min_t(s8, + eirp_power, + ar->max_allowed_tx_power); + } else { + /* If AP local power constraint is present */ + if (pwr_reduction) + max_tx_power[pwr_lvl_idx] = + max_tx_power[pwr_lvl_idx] - pwr_reduction; + /* If firmware updated max tx power is non zero, then take + * the min of firmware updated ap tx power + * and max power derived from above mentioned parameters. + */ + if (ar->max_allowed_tx_power) + max_tx_power[pwr_lvl_idx] = + min_t(s8, + max_tx_power[pwr_lvl_idx], + ar->max_allowed_tx_power); + } + reg_tpc_info->chan_power_info[pwr_lvl_idx].chan_cfreq = center_freq; + reg_tpc_info->chan_power_info[pwr_lvl_idx].tx_power = + max_tx_power[pwr_lvl_idx]; + } + + reg_tpc_info->num_pwr_levels = num_pwr_levels; + reg_tpc_info->is_psd_power = is_psd_power; + reg_tpc_info->eirp_power = eirp_power; + reg_tpc_info->ap_power_type = + ath11k_reg_ap_pwr_convert(vif->bss_conf.power_type); +} + static void ath11k_mac_parse_tx_pwr_env(struct ath11k *ar, struct ieee80211_vif *vif, struct ieee80211_chanctx_conf *ctx) diff --git a/drivers/net/wireless/ath/ath11k/mac.h b/drivers/net/wireless/ath/ath11k/mac.h index 0dfdeed5177b..eb1f1f4fe7e1 100644 --- a/drivers/net/wireless/ath/ath11k/mac.h +++ b/drivers/net/wireless/ath/ath11k/mac.h @@ -176,4 +176,7 @@ int ath11k_mac_wait_tx_complete(struct ath11k *ar); int ath11k_mac_vif_set_keepalive(struct ath11k_vif *arvif, enum wmi_sta_keepalive_method method, u32 interval); +void ath11k_mac_fill_reg_tpc_info(struct ath11k *ar, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx); #endif