diff mbox series

[v2,02/11] wifi: rtw89: load BB parameters to PHY-1

Message ID 20240209065229.34515-3-pkshih@realtek.com (mailing list archive)
State Accepted
Commit e10cd2ddd89e8b3e61b49247067e79f7debec2f1
Delegated to: Kalle Valo
Headers show
Series wifi: rtw89: enable DBCC for WiFi 7 chips by default | expand

Commit Message

Ping-Ke Shih Feb. 9, 2024, 6:52 a.m. UTC 
We are going to support MLO/DBCC, so need to load parameter table to
PHY-1 as well.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
v2:
 - use 'uintptr_t' to avoid clang warning on casting from common
   argument with type void*
---
 drivers/net/wireless/realtek/rtw89/phy.c | 29 ++++++++++++++++--------
 1 file changed, 20 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c
index 7c2f0ba996b1..81f73821e3fc 100644
--- a/drivers/net/wireless/realtek/rtw89/phy.c
+++ b/drivers/net/wireless/realtek/rtw89/phy.c
@@ -1025,22 +1025,30 @@  static void rtw89_phy_config_bb_reg(struct rtw89_dev *rtwdev,
 				    enum rtw89_rf_path rf_path,
 				    void *extra_data)
 {
-	if (reg->addr == 0xfe)
+	u32 addr;
+
+	if (reg->addr == 0xfe) {
 		mdelay(50);
-	else if (reg->addr == 0xfd)
+	} else if (reg->addr == 0xfd) {
 		mdelay(5);
-	else if (reg->addr == 0xfc)
+	} else if (reg->addr == 0xfc) {
 		mdelay(1);
-	else if (reg->addr == 0xfb)
+	} else if (reg->addr == 0xfb) {
 		udelay(50);
-	else if (reg->addr == 0xfa)
+	} else if (reg->addr == 0xfa) {
 		udelay(5);
-	else if (reg->addr == 0xf9)
+	} else if (reg->addr == 0xf9) {
 		udelay(1);
-	else if (reg->data == BYPASS_CR_DATA)
+	} else if (reg->data == BYPASS_CR_DATA) {
 		rtw89_debug(rtwdev, RTW89_DBG_PHY_TRACK, "Bypass CR 0x%x\n", reg->addr);
-	else
-		rtw89_phy_write32(rtwdev, reg->addr, reg->data);
+	} else {
+		addr = reg->addr;
+
+		if ((uintptr_t)extra_data == RTW89_PHY_1)
+			addr += rtw89_phy0_phy1_offset(rtwdev, reg->addr);
+
+		rtw89_phy_write32(rtwdev, addr, reg->data);
+	}
 }
 
 union rtw89_phy_bb_gain_arg {
@@ -1554,6 +1562,9 @@  void rtw89_phy_init_bb_reg(struct rtw89_dev *rtwdev)
 
 	bb_table = elm_info->bb_tbl ? elm_info->bb_tbl : chip->bb_table;
 	rtw89_phy_init_reg(rtwdev, bb_table, rtw89_phy_config_bb_reg, NULL);
+	if (rtwdev->dbcc_en)
+		rtw89_phy_init_reg(rtwdev, bb_table, rtw89_phy_config_bb_reg,
+				   (void *)RTW89_PHY_1);
 	rtw89_chip_init_txpwr_unit(rtwdev, RTW89_PHY_0);
 
 	bb_gain_table = elm_info->bb_gain ? elm_info->bb_gain : chip->bb_gain_table;