diff mbox series

[v2,6/8] wifi: ath12k: Introduce device group abstraction

Message ID 20240425055759.1181165-7-quic_hprem@quicinc.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series wifi: ath12k: Introduce device group abstraction | expand

Commit Message

Harshitha Prem April 25, 2024, 5:57 a.m. UTC
From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>

Currently, single device is probed and once firmware is ready, the device
is registered to mac80211. For multi-link operation, different bands of
different devices or same device would be part of a single wiphy and for
this, hardware device group abstraction would be helpful.

Hardware device group abstraction - when there are multiple devices (with
single radio or dual radio) that are connected by any means of interface
for communicating between them, then these devices can be combined
together as a single group using a group id to form a group abstraction
and register to mac80211.

The grouping information of multiple devices would be based on device tree
during device probe. If no such information is available then a single
device will be part of group abstraction and registered to mac80211 else
multiple devices advertised in device tree are combined and then registered
to mac80211.

For device group abstraction, a base structure named ath12k_hw_group (ag)
and the following helpers are introduced:
        ath12k_core_hw_group_alloc()    : allocate ath12k_hw_group (ag)
                                          based on group id and number
                                          of devices that are going to
                                          be part of this group.
        ath12k_core_hw_group_free()     : free ag during deinit.
        ath12k_core_assign_hw_group()   : assign/map the details of group
                                          to ath12k_base (ab).
        ath12k_core_unassign_hw_group() : unassign/unmap the details of ag
                                          in ath12k_base (ab).
        ath12k_core_hw_group_create()   : create the devices which are part
                                          of group (ag).
        ath12k_core_hw_group_destroy()  : cleanup the devices in ag

These helpers are used during device probe and mapping the group to the
devices involved.

Please find the illustration of how multiple devices might be combined
together in future based on group id.

                Grouping of multiple devices (in future)

+------------------------------------------------------------------------+
|  +-------------------------------------+       +-------------------+   |
|  |   +-----------+ | | +-----------+   |       |   +-----------+   |   |
|  |   | ar (2GHz) | | | | ar (5GHz) |   |       |   | ar (6GHz) |   |   |
|  |   +-----------+ | | +-----------+   |       |   +-----------+   |   |
|  |          ath12k_base (ab)           |       | ath12k_base (ab)  |   |
|  |         (Dual band device)          |       |                   |   |
|  +-------------------------------------+       +-------------------+   |
|                 ath12k_hw_group (ag) based on group id                 |
+------------------------------------------------------------------------+

In the above representation, two devices are combined into single group
based on group id.

Add base code changes where single device would be part of a group with an
invalid group id forming an group abstraction. Multi device grouping will
be introduced in future.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/core.c | 209 +++++++++++++++++++++++--
 drivers/net/wireless/ath/ath12k/core.h |  20 +++
 drivers/net/wireless/ath/ath12k/pci.c  |   1 +
 3 files changed, 220 insertions(+), 10 deletions(-)

Comments

Jeff Johnson April 25, 2024, 9:32 p.m. UTC | #1
On 4/24/2024 10:57 PM, Harshitha Prem wrote:
> From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
> 
> Currently, single device is probed and once firmware is ready, the device
> is registered to mac80211. For multi-link operation, different bands of
> different devices or same device would be part of a single wiphy and for
> this, hardware device group abstraction would be helpful.
> 
> Hardware device group abstraction - when there are multiple devices (with
> single radio or dual radio) that are connected by any means of interface
> for communicating between them, then these devices can be combined
> together as a single group using a group id to form a group abstraction
> and register to mac80211.
> 
> The grouping information of multiple devices would be based on device tree
> during device probe. If no such information is available then a single
> device will be part of group abstraction and registered to mac80211 else
> multiple devices advertised in device tree are combined and then registered
> to mac80211.
> 
> For device group abstraction, a base structure named ath12k_hw_group (ag)
> and the following helpers are introduced:
>         ath12k_core_hw_group_alloc()    : allocate ath12k_hw_group (ag)
>                                           based on group id and number
>                                           of devices that are going to
>                                           be part of this group.
>         ath12k_core_hw_group_free()     : free ag during deinit.
>         ath12k_core_assign_hw_group()   : assign/map the details of group
>                                           to ath12k_base (ab).
>         ath12k_core_unassign_hw_group() : unassign/unmap the details of ag
>                                           in ath12k_base (ab).
>         ath12k_core_hw_group_create()   : create the devices which are part
>                                           of group (ag).
>         ath12k_core_hw_group_destroy()  : cleanup the devices in ag
> 
> These helpers are used during device probe and mapping the group to the
> devices involved.
> 
> Please find the illustration of how multiple devices might be combined
> together in future based on group id.
> 
>                 Grouping of multiple devices (in future)
> 
> +------------------------------------------------------------------------+
> |  +-------------------------------------+       +-------------------+   |
> |  |   +-----------+ | | +-----------+   |       |   +-----------+   |   |
> |  |   | ar (2GHz) | | | | ar (5GHz) |   |       |   | ar (6GHz) |   |   |
> |  |   +-----------+ | | +-----------+   |       |   +-----------+   |   |
> |  |          ath12k_base (ab)           |       | ath12k_base (ab)  |   |
> |  |         (Dual band device)          |       |                   |   |
> |  +-------------------------------------+       +-------------------+   |
> |                 ath12k_hw_group (ag) based on group id                 |
> +------------------------------------------------------------------------+
> 
> In the above representation, two devices are combined into single group
> based on group id.
> 
> Add base code changes where single device would be part of a group with an
> invalid group id forming an group abstraction. Multi device grouping will
> be introduced in future.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
> Co-developed-by: Harshitha Prem <quic_hprem@quicinc.com>
> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index aeb4af6842b6..bae0d36ddb24 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -21,6 +21,9 @@  unsigned int ath12k_debug_mask;
 module_param_named(debug_mask, ath12k_debug_mask, uint, 0644);
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 
+static DEFINE_MUTEX(ath12k_hw_lock);
+static struct list_head ath12k_hw_groups = LIST_HEAD_INIT(ath12k_hw_groups);
+
 static int ath12k_core_rfkill_config(struct ath12k_base *ab)
 {
 	struct ath12k *ar;
@@ -1188,20 +1191,111 @@  int ath12k_core_pre_init(struct ath12k_base *ab)
 	return 0;
 }
 
-int ath12k_core_init(struct ath12k_base *ab)
+static inline
+bool ath12k_core_hw_group_create_ready(struct ath12k_hw_group *ag)
 {
-	int ret;
+	lockdep_assert_held(&ag->mutex_lock);
 
-	ret = ath12k_core_soc_create(ab);
-	if (ret) {
-		ath12k_err(ab, "failed to create soc core: %d\n", ret);
-		return ret;
+	return (ag->num_probed == ag->num_devices);
+}
+
+static struct ath12k_hw_group *
+ath12k_core_hw_group_alloc(u8 id, u8 max_devices)
+{
+	struct ath12k_hw_group *ag;
+
+	lockdep_assert_held(&ath12k_hw_lock);
+
+	ag = kzalloc(sizeof(*ag), GFP_KERNEL);
+	if (!ag)
+		return NULL;
+
+	ag->id = id;
+	ag->num_devices = max_devices;
+	list_add(&ag->list, &ath12k_hw_groups);
+	mutex_init(&ag->mutex_lock);
+
+	return ag;
+}
+
+static void ath12k_core_hw_group_free(struct ath12k_hw_group *ag)
+{
+	mutex_lock(&ath12k_hw_lock);
+
+	list_del(&ag->list);
+	kfree(ag);
+
+	mutex_unlock(&ath12k_hw_lock);
+}
+
+static struct ath12k_hw_group *ath12k_core_assign_hw_group(struct ath12k_base *ab)
+{
+	struct ath12k_hw_group *ag;
+	u32 group_id = ATH12K_INVALID_GROUP_ID;
+
+	lockdep_assert_held(&ath12k_hw_lock);
+
+	/* The grouping of multiple devices will be done based on device tree file.
+	 * TODO: device tree file parsing to know about the devices involved in group.
+	 *
+	 * The platforms that do not have any valid group information would have each
+	 * device to be part of its own invalid group.
+	 *
+	 * Currently, we are not parsing any device tree information and hence, grouping
+	 * of multiple devices is not involved. Thus, single device is added to device
+	 * group.
+	 */
+	ag = ath12k_core_hw_group_alloc(group_id, 1);
+	if (!ag) {
+		ath12k_warn(ab, "unable to create new hw group\n");
+		return NULL;
 	}
+	ath12k_dbg(ab, ATH12K_DBG_BOOT, "Single device is added to hardware group\n");
 
-	return 0;
+	ab->device_id = ag->num_probed++;
+	ag->ab[ab->device_id] = ab;
+	ab->ag = ag;
+
+	return ag;
 }
 
-void ath12k_core_deinit(struct ath12k_base *ab)
+void ath12k_core_unassign_hw_group(struct ath12k_base *ab)
+{
+	struct ath12k_hw_group *ag = ab->ag;
+	u8 device_id = ab->device_id;
+	int num_probed;
+
+	if (!ag)
+		return;
+
+	mutex_lock(&ag->mutex_lock);
+
+	if (WARN_ON(device_id >= ag->num_devices)) {
+		mutex_unlock(&ag->mutex_lock);
+		return;
+	}
+
+	if (WARN_ON(ag->ab[device_id] != ab)) {
+		mutex_unlock(&ag->mutex_lock);
+		return;
+	}
+
+	ag->ab[device_id] = NULL;
+	ab->ag = NULL;
+	ab->device_id = ATH12K_INVALID_DEVICE_ID;
+
+	if (ag->num_probed)
+		ag->num_probed--;
+
+	num_probed = ag->num_probed;
+
+	mutex_unlock(&ag->mutex_lock);
+
+	if (!num_probed)
+		ath12k_core_hw_group_free(ag);
+}
+
+static void ath12k_core_device_cleanup(struct ath12k_base *ab)
 {
 	mutex_lock(&ab->core_lock);
 
@@ -1212,9 +1306,104 @@  void ath12k_core_deinit(struct ath12k_base *ab)
 	ath12k_core_stop(ab);
 
 	mutex_unlock(&ab->core_lock);
+}
+
+static void ath12k_core_hw_group_destroy(struct ath12k_hw_group *ag)
+{
+	struct ath12k_base *ab;
+	int i;
+
+	if (!ag)
+		return;
+
+	mutex_lock(&ag->mutex_lock);
+
+	for (i = 0; i < ag->num_devices; i++) {
+		ab = ag->ab[i];
+		if (!ab)
+			continue;
+
+		if (test_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, &ab->dev_flags))
+			ath12k_core_device_cleanup(ab);
+
+		if (test_and_clear_bit(ATH12K_FLAG_HW_GROUP_ATTACHED, &ab->dev_flags))
+			ath12k_core_soc_destroy(ab);
+
+		ath12k_fw_unmap(ab);
+	}
+
+	mutex_unlock(&ag->mutex_lock);
+}
 
-	ath12k_core_soc_destroy(ab);
-	ath12k_fw_unmap(ab);
+static int ath12k_core_hw_group_create(struct ath12k_hw_group *ag)
+{
+	int i, ret;
+	struct ath12k_base *ab;
+
+	lockdep_assert_held(&ag->mutex_lock);
+
+	for (i = 0; i < ag->num_devices; i++) {
+		ab = ag->ab[i];
+		if (!ab)
+			continue;
+
+		mutex_lock(&ab->core_lock);
+		ret = ath12k_core_soc_create(ab);
+		if (ret) {
+			mutex_unlock(&ab->core_lock);
+			ath12k_err(ab, "failed to create soc core: %d\n", ret);
+			return ret;
+		}
+		set_bit(ATH12K_FLAG_HW_GROUP_ATTACHED, &ab->dev_flags);
+		mutex_unlock(&ab->core_lock);
+	}
+
+	return 0;
+}
+
+int ath12k_core_init(struct ath12k_base *ab)
+{
+	struct ath12k_hw_group *ag;
+	int ret;
+
+	mutex_lock(&ath12k_hw_lock);
+	ag = ath12k_core_assign_hw_group(ab);
+	if (!ag) {
+		mutex_unlock(&ath12k_hw_lock);
+		ath12k_warn(ab, "unable to get hw group\n");
+		return -ENODEV;
+	}
+	mutex_unlock(&ath12k_hw_lock);
+
+	mutex_lock(&ag->mutex_lock);
+
+	ath12k_dbg(ab, ATH12K_DBG_BOOT, "num devices in group %d, num probed %d\n",
+		   ag->num_devices, ag->num_probed);
+
+	if (ath12k_core_hw_group_create_ready(ag)) {
+		ret = ath12k_core_hw_group_create(ag);
+		if (ret) {
+			mutex_unlock(&ag->mutex_lock);
+			ath12k_warn(ab, "unable to create hw group\n");
+			goto err_hw_group;
+		}
+	}
+
+	mutex_unlock(&ag->mutex_lock);
+
+	return 0;
+
+err_hw_group:
+	ath12k_core_hw_group_destroy(ab->ag);
+	ath12k_core_unassign_hw_group(ab);
+
+	return ret;
+}
+
+void ath12k_core_deinit(struct ath12k_base *ab)
+{
+	ath12k_core_hw_group_destroy(ab->ag);
+	ath12k_core_unassign_hw_group(ab);
 }
 
 void ath12k_core_free(struct ath12k_base *ab)
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 58230aecb7b9..0bb05bf32eb4 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -59,6 +59,10 @@ 
 #define ATH12K_RECONFIGURE_TIMEOUT_HZ		(10 * HZ)
 #define ATH12K_RECOVER_START_TIMEOUT_HZ		(20 * HZ)
 
+#define ATH12K_MAX_SOCS 3
+#define ATH12K_INVALID_GROUP_ID  0xFF
+#define ATH12K_INVALID_DEVICE_ID 0xFF
+
 enum ath12k_bdf_search {
 	ATH12K_BDF_SEARCH_DEFAULT,
 	ATH12K_BDF_SEARCH_BUS_AND_BOARD,
@@ -211,6 +215,7 @@  enum ath12k_dev_flags {
 	ATH12K_FLAG_CE_IRQ_ENABLED,
 	ATH12K_FLAG_EXT_IRQ_ENABLED,
 	ATH12K_FLAG_QMI_FW_READY_COMPLETE,
+	ATH12K_FLAG_HW_GROUP_ATTACHED,
 };
 
 enum ath12k_monitor_flags {
@@ -732,6 +737,17 @@  struct ath12k_soc_dp_stats {
 	struct ath12k_soc_dp_tx_err_stats tx_err;
 };
 
+/* Holds info on the group of devices that are registered as a single wiphy */
+struct ath12k_hw_group {
+	struct list_head list;
+	u8 id;
+	u8 num_devices;
+	u8 num_probed;
+	struct ath12k_base *ab[ATH12K_MAX_SOCS];
+	/* To synchronize group create, assign, start, stop */
+	struct mutex mutex_lock;
+};
+
 /**
  * enum ath12k_link_capable_flags - link capable flags
  *
@@ -931,6 +947,9 @@  struct ath12k_base {
 
 #endif /* CONFIG_ACPI */
 
+	struct ath12k_hw_group *ag;
+	u8 device_id;
+
 	/* must be last */
 	u8 drv_priv[] __aligned(sizeof(void *));
 };
@@ -961,6 +980,7 @@  int ath12k_core_resume_early(struct ath12k_base *ab);
 int ath12k_core_resume(struct ath12k_base *ab);
 int ath12k_core_suspend(struct ath12k_base *ab);
 int ath12k_core_suspend_late(struct ath12k_base *ab);
+void ath12k_core_unassign_hw_group(struct ath12k_base *ab);
 
 const struct firmware *ath12k_core_firmware_request(struct ath12k_base *ab,
 						    const char *filename);
diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index 16af046c33d9..dd9e593e7b5d 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -1505,6 +1505,7 @@  static void ath12k_pci_remove(struct pci_dev *pdev)
 	if (test_bit(ATH12K_FLAG_QMI_FAIL, &ab->dev_flags)) {
 		ath12k_pci_power_down(ab, false);
 		ath12k_qmi_deinit_service(ab);
+		ath12k_core_unassign_hw_group(ab);
 		goto qmi_fail;
 	}