@@ -2330,21 +2330,20 @@ static void rtw89_pci_disable_eq(struct rtw89_dev *rtwdev)
u32 backup_aspm;
u32 phy_offset;
u16 oobs_val;
- u16 val16;
int ret;
if (rtwdev->chip->chip_id != RTL8852C)
return;
- backup_aspm = rtw89_read32(rtwdev, R_AX_PCIE_MIX_CFG_V1);
- rtw89_write32_clr(rtwdev, R_AX_PCIE_MIX_CFG_V1, B_AX_ASPM_CTRL_MASK);
-
g1_oobs = rtw89_read16_mask(rtwdev, R_RAC_DIRECT_OFFSET_G1 +
RAC_ANA09 * RAC_MULT, BAC_OOBS_SEL);
g2_oobs = rtw89_read16_mask(rtwdev, R_RAC_DIRECT_OFFSET_G2 +
RAC_ANA09 * RAC_MULT, BAC_OOBS_SEL);
if (g1_oobs && g2_oobs)
- goto out;
+ return;
+
+ backup_aspm = rtw89_read32(rtwdev, R_AX_PCIE_MIX_CFG_V1);
+ rtw89_write32_clr(rtwdev, R_AX_PCIE_MIX_CFG_V1, B_AX_ASPM_CTRL_MASK);
ret = rtw89_pci_get_phy_offset_by_link_speed(rtwdev, &phy_offset);
if (ret)
@@ -2354,15 +2353,16 @@ static void rtw89_pci_disable_eq(struct rtw89_dev *rtwdev)
rtw89_write16(rtwdev, phy_offset + RAC_ANA10 * RAC_MULT, ADDR_SEL_PINOUT_DIS_VAL);
rtw89_write16_set(rtwdev, phy_offset + RAC_ANA19 * RAC_MULT, B_PCIE_BIT_RD_SEL);
- val16 = rtw89_read16_mask(rtwdev, phy_offset + RAC_ANA1F * RAC_MULT,
- OOBS_LEVEL_MASK);
- oobs_val = u16_encode_bits(val16, OOBS_SEN_MASK);
+ oobs_val = rtw89_read16_mask(rtwdev, phy_offset + RAC_ANA1F * RAC_MULT,
+ OOBS_LEVEL_MASK);
- rtw89_write16(rtwdev, R_RAC_DIRECT_OFFSET_G1 + RAC_ANA03 * RAC_MULT, oobs_val);
+ rtw89_write16_mask(rtwdev, R_RAC_DIRECT_OFFSET_G1 + RAC_ANA03 * RAC_MULT,
+ OOBS_SEN_MASK, oobs_val);
rtw89_write16_set(rtwdev, R_RAC_DIRECT_OFFSET_G1 + RAC_ANA09 * RAC_MULT,
BAC_OOBS_SEL);
- rtw89_write16(rtwdev, R_RAC_DIRECT_OFFSET_G2 + RAC_ANA03 * RAC_MULT, oobs_val);
+ rtw89_write16_mask(rtwdev, R_RAC_DIRECT_OFFSET_G2 + RAC_ANA03 * RAC_MULT,
+ OOBS_SEN_MASK, oobs_val);
rtw89_write16_set(rtwdev, R_RAC_DIRECT_OFFSET_G2 + RAC_ANA09 * RAC_MULT,
BAC_OOBS_SEL);
@@ -2783,7 +2783,6 @@ static int rtw89_pci_ops_mac_pre_init_ax(struct rtw89_dev *rtwdev)
const struct rtw89_pci_info *info = rtwdev->pci_info;
int ret;
- rtw89_pci_disable_eq(rtwdev);
rtw89_pci_ber(rtwdev);
rtw89_pci_rxdma_prefth(rtwdev);
rtw89_pci_l1off_pwroff(rtwdev);
@@ -4155,6 +4154,7 @@ static int __maybe_unused rtw89_pci_resume(struct device *dev)
B_AX_SEL_REQ_ENTR_L1);
}
rtw89_pci_l2_hci_ldo(rtwdev);
+ rtw89_pci_disable_eq(rtwdev);
rtw89_pci_filter_out(rtwdev);
rtw89_pci_link_cfg(rtwdev);
rtw89_pci_l1ss_cfg(rtwdev);
@@ -4289,6 +4289,7 @@ int rtw89_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_clear_resource;
}
+ rtw89_pci_disable_eq(rtwdev);
rtw89_pci_filter_out(rtwdev);
rtw89_pci_link_cfg(rtwdev);
rtw89_pci_l1ss_cfg(rtwdev);
PCI PHY EQ value is missing after card off/on, so update the value after device resume. The original commit only updates once at probe stage, which could lead problem after suspend/resume. The logic should be read a value from one register and write to another register with a mask to avoid affecting unrelated bits. Fixes: a78d33a1286c ("wifi: rtw89: 8852c: disable PCI PHY EQ to improve compatibility") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> --- drivers/net/wireless/realtek/rtw89/pci.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-)