| Message ID | 20240719032326.7353-4-pkshih@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Chen-Yu Tsai |
| Headers | show |
| Series | [v2,1/5] wireless-regdb: Update regulatory info for New Zealand (NZ) for 2022 | expand |
On Fri, Jul 19, 2024 at 11:24 AM Ping-Ke Shih <pkshih@gmail.com> wrote: > > From: Ping-Ke Shih <pkshih@realtek.com> > > Republic ToGolaise released Decision N 226/ARCEP/DG/22. > > 2400-2483.5 MHz > - EIRP 100 mW and 10 mW/MHz density > 5150-5350 MHz > - EIRP 200 mW > - If TPC is not used, must be reduced by 3 dB > 5470-5850 MHz > - EIRP 1W > - If TPC is not used, must be reduced by 3 dB > 5925-6425 MHz > - LPI > * EIRP 23 dBm (200 mW) > * EIRP density 10 dBm/MHz > (Reference [1] suggest this as -10 dBm/MHz, but this would be an error, > becase PSD of LPI should not be lower than VLP.) > * Use limited to indoor > - VLP > * EIRP 14 dBm (25 mW) > * EIRP density -1 dBm/MHz > 57-66 GHz > - EIRP 40 dBm and 13 dBm/MHz density > > [1] https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf > > Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> > --- > v2: > - in commit message, describe typo that 5925-6425 LPI should be EIRP > density 10 dBm/MHz. Otherwise, PSD for LPI is lower than VLP. I applied this patch for now. But could you reach out to the ARCEP to notify them of this, and ask for clarification? Thanks ChenYu > - add DFS for all bands > - not split 5150 - 5350 band, and set bandwidth to 80 MHz > - set bandwidth 160 MHz for 5470 - 5850 > --- > db.txt | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > diff --git a/db.txt b/db.txt > index 31a051f242e5..b5e40e038d77 100644 > --- a/db.txt > +++ b/db.txt > @@ -1763,11 +1763,14 @@ country TD: DFS-ETSI > (5250 - 5330 @ 80), (20), DFS, AUTO-BW > (5490 - 5710 @ 160), (27), DFS > > +# Source: > +# https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf > country TG: DFS-ETSI > - (2402 - 2482 @ 40), (20) > - (5170 - 5250 @ 40), (20) > - (5250 - 5330 @ 40), (20), DFS > - (5490 - 5710 @ 40), (27), DFS > + (2400 - 2483.5 @ 40), (100 mW), DFS > + (5150 - 5350 @ 80), (20), DFS > + (5470 - 5850 @ 160), (27), DFS > + (5925 - 6425 @ 320), (23), DFS, NO-OUTDOOR > + (57000 - 66000 @2160), (40), DFS > > # Source: > # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf > -- > 2.25.1 >
Chen-Yu Tsai <wens@kernel.org> wrote: > > > v2: > > - in commit message, describe typo that 5925-6425 LPI should be EIRP > > density 10 dBm/MHz. Otherwise, PSD for LPI is lower than VLP. > > I applied this patch for now. But could you reach out to the ARCEP to > notify them of this, and ask for clarification? Sure. I will contact ARCEP.
diff --git a/db.txt b/db.txt index 31a051f242e5..b5e40e038d77 100644 --- a/db.txt +++ b/db.txt @@ -1763,11 +1763,14 @@ country TD: DFS-ETSI (5250 - 5330 @ 80), (20), DFS, AUTO-BW (5490 - 5710 @ 160), (27), DFS +# Source: +# https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf country TG: DFS-ETSI - (2402 - 2482 @ 40), (20) - (5170 - 5250 @ 40), (20) - (5250 - 5330 @ 40), (20), DFS - (5490 - 5710 @ 40), (27), DFS + (2400 - 2483.5 @ 40), (100 mW), DFS + (5150 - 5350 @ 80), (20), DFS + (5470 - 5850 @ 160), (27), DFS + (5925 - 6425 @ 320), (23), DFS, NO-OUTDOOR + (57000 - 66000 @2160), (40), DFS # Source: # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf