@@ -418,7 +418,6 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
u32 changed);
void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif);
-int ath_beaconq_config(struct ath_softc *sc);
void ath9k_set_beacon(struct ath_softc *sc);
void ath9k_set_beaconing_status(struct ath_softc *sc, bool status);
@@ -30,7 +30,7 @@ static void ath9k_reset_beacon_status(struct ath_softc *sc)
* the operating mode of the station (AP or AdHoc). Parameters are AIFS
* settings and channel width min/max
*/
-int ath_beaconq_config(struct ath_softc *sc)
+static void ath9k_beaconq_config(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
@@ -38,6 +38,7 @@ int ath_beaconq_config(struct ath_softc *sc)
struct ath_txq *txq;
ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
+
if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
/* Always burst out beacon and CAB traffic. */
qi.tqi_aifs = 1;
@@ -56,12 +57,9 @@ int ath_beaconq_config(struct ath_softc *sc)
}
if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
- ath_err(common,
- "Unable to update h/w beacon queue parameters\n");
- return 0;
+ ath_err(common, "Unable to update h/w beacon queue parameters\n");
} else {
ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
- return 1;
}
}
@@ -401,6 +399,7 @@ static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt, u32 intval)
ath9k_hw_disable_interrupts(ah);
ath9k_hw_reset_tsf(ah);
+ ath9k_beaconq_config(sc);
ath9k_hw_beaconinit(ah, nexttbtt, intval);
sc->beacon.bmisscnt = 0;
ath9k_hw_set_interrupts(ah);
@@ -432,7 +431,6 @@ static void ath9k_beacon_config_ap(struct ath_softc *sc,
ath_dbg(common, BEACON, "AP nexttbtt: %u intval: %u conf_intval: %u\n",
nexttbtt, intval, conf->beacon_interval);
- ath_beaconq_config(sc);
ath9k_beacon_init(sc, nexttbtt, intval);
}
@@ -584,7 +582,6 @@ static void ath9k_beacon_config_adhoc(struct ath_softc *sc,
ath_dbg(common, BEACON, "IBSS nexttbtt: %u intval: %u conf_intval: %u\n",
nexttbtt, intval, conf->beacon_interval);
- ath_beaconq_config(sc);
ath9k_beacon_init(sc, nexttbtt, intval);
}
@@ -1358,10 +1358,6 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw,
if (ret)
ath_err(common, "TXQ Update failed\n");
- if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
- if (queue == WME_AC_BE && !ret)
- ath_beaconq_config(sc);
-
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
@@ -1403,16 +1403,6 @@ int ath_txq_update(struct ath_softc *sc, int qnum,
int error = 0;
struct ath9k_tx_queue_info qi;
- if (qnum == sc->beacon.beaconq) {
- /*
- * XXX: for beacon queue, we just save the parameter.
- * It will be picked up by ath_beaconq_config when
- * it's necessary.
- */
- sc->beacon.beacon_qi = *qinfo;
- return 0;
- }
-
BUG_ON(sc->tx.txq[qnum].axq_qnum != qnum);
ath9k_hw_get_txq_props(ah, qnum, &qi);
Setup the beacon queue parameters after disabling interrupts. Also, remove the redundant call in conf_tx() for IBSS mode since the queue would be configured with the appropriate cwmin/cwmax values when beaconing is enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/beacon.c | 11 ++++------- drivers/net/wireless/ath/ath9k/main.c | 4 ---- drivers/net/wireless/ath/ath9k/xmit.c | 10 ---------- 4 files changed, 4 insertions(+), 22 deletions(-)