@@ -107,6 +107,9 @@ static void mt76x0_reset_csr_bbp(struct mt76x0_dev *dev)
MT_MAC_SYS_CTRL_RESET_CSR |
MT_MAC_SYS_CTRL_RESET_BBP);
msleep(200);
+ mt76_clear(dev, MT_MAC_SYS_CTRL,
+ MT_MAC_SYS_CTRL_RESET_CSR |
+ MT_MAC_SYS_CTRL_RESET_BBP);
}
#define RANDOM_WRITE(dev, tab) \
@@ -152,13 +155,6 @@ static void mt76x0_init_mac_registers(struct mt76x0_dev *dev)
reg &= ~0x3;
mt76_wr(dev, MT_MAC_SYS_CTRL, reg);
- if (is_mt7610e(dev)) {
- /* Disable COEX_EN */
- reg = mt76_rr(dev, MT_COEXCFG0);
- reg &= 0xFFFFFFFE;
- mt76_wr(dev, MT_COEXCFG0, reg);
- }
-
/* Set 0x141C[15:12]=0xF */
reg = mt76_rr(dev, MT_EXT_CCA_CFG);
reg |= 0x0000F000;
@@ -20,6 +20,51 @@
#include "mt76x0.h"
#include "mcu.h"
+#include "../mt76x02_dma.h"
+
+static int mt76x0e_register_device(struct mt76x0_dev *dev)
+{
+ int err;
+
+ mt76x0_chip_onoff(dev, true, false);
+ if (!mt76x02_wait_for_mac(&dev->mt76))
+ return -ETIMEDOUT;
+
+ mt76x02_dma_disable(&dev->mt76);
+ err = mt76x0e_mcu_init(dev);
+ if (err < 0)
+ return err;
+
+ err = mt76x02_dma_init(&dev->mt76);
+ if (err < 0)
+ return err;
+
+ err = mt76x0_init_hardware(dev);
+ if (err < 0)
+ return err;
+
+ if (mt76_chip(&dev->mt76) == 0x7610) {
+ u16 val;
+
+ mt76_clear(dev, MT_COEXCFG0, BIT(0));
+ val = mt76x02_eeprom_get(&dev->mt76, MT_EE_NIC_CONF_0);
+ if (val & MT_EE_NIC_CONF_0_PA_IO_CURRENT) {
+ u32 data;
+
+ /* set external external PA I/O
+ * current to 16mA
+ */
+ data = mt76_rr(dev, 0x11c);
+ val |= 0xc03;
+ mt76_wr(dev, 0x11c, val);
+ }
+ }
+
+ mt76_clear(dev, 0x110, BIT(9));
+ mt76_set(dev, MT_MAX_LEN_CFG, BIT(13));
+
+ return 0;
+}
static int
mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -50,7 +95,7 @@ mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dev->mt76.rev = mt76_rr(dev, MT_ASIC_VERSION);
dev_info(dev->mt76.dev, "ASIC revision: %08x\n", dev->mt76.rev);
- ret = mt76x0e_mcu_init(dev);
+ ret = mt76x0e_register_device(dev);
if (ret < 0)
goto error;
@@ -107,6 +107,7 @@ enum mt76x02_eeprom_field {
#define MT_EE_NIC_CONF_0_PA_TYPE GENMASK(9, 8)
#define MT_EE_NIC_CONF_0_PA_INT_2G BIT(8)
#define MT_EE_NIC_CONF_0_PA_INT_5G BIT(9)
+#define MT_EE_NIC_CONF_0_PA_IO_CURRENT BIT(10)
#define MT_EE_NIC_CONF_0_BOARD_TYPE GENMASK(13, 12)
#define MT_EE_NIC_CONF_1_HW_RF_CTRL BIT(0)
Add mt76x0e_register_device routine in pci.c to initialize the device during hw probe. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> --- .../net/wireless/mediatek/mt76/mt76x0/init.c | 10 ++-- .../net/wireless/mediatek/mt76/mt76x0/pci.c | 47 ++++++++++++++++++- .../wireless/mediatek/mt76/mt76x02_eeprom.h | 1 + 3 files changed, 50 insertions(+), 8 deletions(-)