@@ -1211,7 +1211,7 @@ static u8 efuse_calculate_word_cnts(u8 word_en)
}
int rtl_get_hwinfo(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv,
- int max_size, u8 *hwinfo, int *params)
+ int max_size, u8 *hwinfo, const int *params)
{
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
struct rtl_pci_priv *rtlpcipriv = rtl_pcipriv(hw);
@@ -89,7 +89,7 @@ void efuse_force_write_vendor_id(struct ieee80211_hw *hw);
void efuse_re_pg_section(struct ieee80211_hw *hw, u8 section_idx);
void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate);
int rtl_get_hwinfo(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv,
- int max_size, u8 *hwinfo, int *params);
+ int max_size, u8 *hwinfo, const int *params);
void rtl_fill_dummy(u8 *pfwbuf, u32 *pfwlen);
void rtl_fw_page_write(struct ieee80211_hw *hw, u32 page, u8 *buffer,
u32 size);
@@ -98,24 +98,45 @@ int rtl92d_fw_free_to_go(struct ieee80211_hw *hw)
}
EXPORT_SYMBOL_GPL(rtl92d_fw_free_to_go);
+#define RTL_USB_DELAY_FACTOR 60
+
void rtl92d_firmware_selfreset(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
u8 u1b_tmp;
u8 delay = 100;
+ if (rtlhal->interface == INTF_USB) {
+ delay *= RTL_USB_DELAY_FACTOR;
+
+ rtl_write_byte(rtlpriv, REG_FSIMR, 0);
+
+ /* We need to disable other HRCV INT to influence 8051 reset. */
+ rtl_write_byte(rtlpriv, REG_FWIMR, 0x20);
+
+ /* Close mask to prevent incorrect FW write operation. */
+ rtl_write_byte(rtlpriv, REG_FTIMR, 0);
+ }
+
/* Set (REG_HMETFR + 3) to 0x20 is reset 8051 */
rtl_write_byte(rtlpriv, REG_HMETFR + 3, 0x20);
u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
- while (u1b_tmp & BIT(2)) {
+ while (u1b_tmp & (FEN_CPUEN >> 8)) {
delay--;
if (delay == 0)
break;
udelay(50);
u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
}
+
+ if (rtlhal->interface == INTF_USB) {
+ if ((u1b_tmp & (FEN_CPUEN >> 8)) && delay == 0)
+ rtl_write_byte(rtlpriv, REG_FWIMR, 0);
+ }
+
WARN_ONCE((delay <= 0), "rtl8192de: 8051 reset failed!\n");
rtl_dbg(rtlpriv, COMP_FW, DBG_DMESG,
"=====> 8051 reset success (%d)\n", delay);
@@ -25,6 +25,16 @@
#define GET_FIRMWARE_HDR_SUB_VER(__fwhdr) \
le32_get_bits(*(__le32 *)((__fwhdr) + 4), GENMASK(23, 16))
+#define RAID_MASK GENMASK(31, 28)
+#define RATE_MASK_MASK GENMASK(27, 0)
+#define SHORT_GI_MASK BIT(5)
+#define MACID_MASK GENMASK(4, 0)
+
+struct rtl92d_rate_mask_h2c {
+ __le32 rate_mask_and_raid;
+ u8 macid_and_short_gi;
+} __packed;
+
bool rtl92d_is_fw_downloaded(struct rtl_priv *rtlpriv);
void rtl92d_enable_fw_download(struct ieee80211_hw *hw, bool enable);
void rtl92d_write_fw(struct ieee80211_hw *hw,
@@ -623,9 +623,14 @@ static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw,
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION];
+ bool is_single_mac = true;
- if (macphy_crvalue & BIT(3)) {
+ if (rtlhal->interface == INTF_PCI)
+ is_single_mac = !!(content[EEPROM_MAC_FUNCTION] & BIT(3));
+ else if (rtlhal->interface == INTF_USB)
+ is_single_mac = !(content[EEPROM_ENDPOINT_SETTING] & BIT(0));
+
+ if (is_single_mac) {
rtlhal->macphymode = SINGLEMAC_SINGLEPHY;
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"MacPhyMode SINGLEMAC_SINGLEPHY\n");
@@ -664,6 +669,7 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "D-CUT!!!\n");
break;
case 0xCC33:
+ case 0x33CC:
chipver |= CHIP_92D_E_CUT;
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "E-CUT!!!\n");
break;
@@ -677,17 +683,29 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
{
+ static const int params_pci[] = {
+ RTL8190_EEPROM_ID, EEPROM_VID, EEPROM_DID,
+ EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR_MAC0_92D,
+ EEPROM_CHANNEL_PLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
+ COUNTRY_CODE_WORLD_WIDE_13
+ };
+ static const int params_usb[] = {
+ RTL8190_EEPROM_ID, EEPROM_VID_USB, EEPROM_PID_USB,
+ EEPROM_VID_USB, EEPROM_PID_USB, EEPROM_MAC_ADDR_MAC0_92DU,
+ EEPROM_CHANNEL_PLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
+ COUNTRY_CODE_WORLD_WIDE_13
+ };
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- int params[] = {RTL8190_EEPROM_ID, EEPROM_VID, EEPROM_DID,
- EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR_MAC0_92D,
- EEPROM_CHANNEL_PLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
- COUNTRY_CODE_WORLD_WIDE_13};
+ const int *params = params_pci;
int i;
u16 usvalue;
u8 *hwinfo;
+ if (rtlhal->interface == INTF_USB)
+ params = params_usb;
+
hwinfo = kzalloc(HWSET_MAX_SIZE, GFP_KERNEL);
if (!hwinfo)
return;
@@ -851,6 +869,7 @@ static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw,
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &rtlpriv->phy;
struct rtl_sta_info *sta_entry = NULL;
+ struct rtl92d_rate_mask_h2c rate_mask;
enum wireless_mode wirelessmode;
bool shortgi = false;
u8 curshortgi_40mhz;
@@ -858,7 +877,6 @@ static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw,
u8 curtxbw_40mhz;
u32 ratr_bitmap;
u8 ratr_index;
- u32 value[2];
u8 macid = 0;
u8 mimo_ps;
@@ -974,12 +992,20 @@ static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw,
break;
}
- value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28);
- value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
+ le32p_replace_bits(&rate_mask.rate_mask_and_raid, ratr_bitmap, RATE_MASK_MASK);
+ le32p_replace_bits(&rate_mask.rate_mask_and_raid, ratr_index, RAID_MASK);
+ u8p_replace_bits(&rate_mask.macid_and_short_gi, macid, MACID_MASK);
+ u8p_replace_bits(&rate_mask.macid_and_short_gi, shortgi, SHORT_GI_MASK);
+ u8p_replace_bits(&rate_mask.macid_and_short_gi, 1, BIT(7));
+
rtl_dbg(rtlpriv, COMP_RATR, DBG_DMESG,
- "ratr_bitmap :%x value0:%x value1:%x\n",
- ratr_bitmap, value[0], value[1]);
- rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *)value);
+ "Rate_index:%x, ratr_val:%x, %5phC\n",
+ ratr_index, ratr_bitmap, &rate_mask);
+ memcpy(rtlpriv->rate_mask, &rate_mask, sizeof(rtlpriv->rate_mask));
+ /* rtl92d_fill_h2c_cmd() does USB I/O and will result in a
+ * "scheduled while atomic" if called directly
+ */
+ schedule_work(&rtlpriv->works.fill_h2c_cmd);
if (macid != 0)
sta_entry->ratr_index = ratr_index;
}
@@ -1023,7 +1049,8 @@ bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
bool actuallyset = false;
unsigned long flag;
- if (rtlpci->being_init_adapter)
+ if (rtlpriv->rtlhal.interface == INTF_PCI &&
+ rtlpci->being_init_adapter)
return false;
if (ppsc->swrf_processing)
return false;
@@ -89,11 +89,11 @@ u32 rtl92d_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
"regaddr(%#x), rfpath(%#x), bitmask(%#x)\n",
regaddr, rfpath, bitmask);
- spin_lock(&rtlpriv->locks.rf_lock);
+ rtl92d_pci_lock(rtlpriv);
original_value = _rtl92d_phy_rf_serial_read(hw, rfpath, regaddr);
bitshift = calculate_bit_shift(bitmask);
readback_value = (original_value & bitmask) >> bitshift;
- spin_unlock(&rtlpriv->locks.rf_lock);
+ rtl92d_pci_unlock(rtlpriv);
rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
"regaddr(%#x), rfpath(%#x), bitmask(%#x), original_value(%#x)\n",
regaddr, rfpath, bitmask, original_value);
@@ -113,7 +113,7 @@ void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
regaddr, bitmask, data, rfpath);
if (bitmask == 0)
return;
- spin_lock(&rtlpriv->locks.rf_lock);
+ rtl92d_pci_lock(rtlpriv);
if (rtlphy->rf_mode != RF_OP_BY_FW) {
if (bitmask != RFREG_OFFSET_MASK) {
original_value = _rtl92d_phy_rf_serial_read(hw,
@@ -125,7 +125,7 @@ void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
}
_rtl92d_phy_rf_serial_write(hw, rfpath, regaddr, data);
}
- spin_unlock(&rtlpriv->locks.rf_lock);
+ rtl92d_pci_unlock(rtlpriv);
rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
"regaddr(%#x), bitmask(%#x), data(%#x), rfpath(%#x)\n",
regaddr, bitmask, data, rfpath);
@@ -649,6 +649,8 @@ static void rtl92d_phy_set_io(struct ieee80211_hw *hw)
case IO_CMD_PAUSE_DM_BY_SCAN:
rtlphy->initgain_backup.xaagccore1 = de_digtable->cur_igvalue;
de_digtable->cur_igvalue = 0x37;
+ if (rtlpriv->rtlhal.interface == INTF_USB)
+ de_digtable->cur_igvalue = 0x17;
rtl92d_dm_write_dig(hw);
break;
default:
@@ -705,22 +707,28 @@ void rtl92d_phy_config_macphymode(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
u8 offset = REG_MAC_PHY_CTRL_NORMAL;
+ u8 phy_ctrl = 0xf0;
+
+ if (rtlhal->interface == INTF_USB) {
+ phy_ctrl = rtl_read_byte(rtlpriv, offset);
+ phy_ctrl &= ~(BIT(0) | BIT(1) | BIT(2));
+ }
switch (rtlhal->macphymode) {
case DUALMAC_DUALPHY:
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"MacPhyMode: DUALMAC_DUALPHY\n");
- rtl_write_byte(rtlpriv, offset, 0xF3);
+ rtl_write_byte(rtlpriv, offset, phy_ctrl | BIT(0) | BIT(1));
break;
case SINGLEMAC_SINGLEPHY:
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"MacPhyMode: SINGLEMAC_SINGLEPHY\n");
- rtl_write_byte(rtlpriv, offset, 0xF4);
+ rtl_write_byte(rtlpriv, offset, phy_ctrl | BIT(2));
break;
case DUALMAC_SINGLEPHY:
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
"MacPhyMode: DUALMAC_SINGLEPHY\n");
- rtl_write_byte(rtlpriv, offset, 0xF1);
+ rtl_write_byte(rtlpriv, offset, phy_ctrl | BIT(0));
break;
}
}
@@ -32,6 +32,9 @@ static inline void rtl92d_acquire_cckandrw_pagea_ctl(struct ieee80211_hw *hw,
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ if (rtlpriv->rtlhal.interface == INTF_USB)
+ return;
+
if (rtlpriv->rtlhal.interfaceindex == 1)
spin_lock_irqsave(&rtlpriv->locks.cck_and_rw_pagea_lock, *flag);
}
@@ -41,6 +44,9 @@ static inline void rtl92d_release_cckandrw_pagea_ctl(struct ieee80211_hw *hw,
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ if (rtlpriv->rtlhal.interface == INTF_USB)
+ return;
+
if (rtlpriv->rtlhal.interfaceindex == 1)
spin_unlock_irqrestore(&rtlpriv->locks.cck_and_rw_pagea_lock,
*flag);
@@ -84,4 +90,22 @@ void rtl92d_acquire_cckandrw_pagea_ctl(struct ieee80211_hw *hw,
void rtl92d_release_cckandrw_pagea_ctl(struct ieee80211_hw *hw,
unsigned long *flag);
+/* Without these helpers and the declarations sparse warns about
+ * context imbalance.
+ */
+static inline void rtl92d_pci_lock(struct rtl_priv *rtlpriv)
+{
+ if (rtlpriv->rtlhal.interface == INTF_PCI)
+ spin_lock(&rtlpriv->locks.rf_lock);
+}
+
+static inline void rtl92d_pci_unlock(struct rtl_priv *rtlpriv)
+{
+ if (rtlpriv->rtlhal.interface == INTF_PCI)
+ spin_unlock(&rtlpriv->locks.rf_lock);
+}
+
+void rtl92d_pci_lock(struct rtl_priv *rtlpriv);
+void rtl92d_pci_unlock(struct rtl_priv *rtlpriv);
+
#endif
@@ -51,6 +51,8 @@
#define REG_HMEBOX_EXT_2 0x008C
#define REG_HMEBOX_EXT_3 0x008E
+#define REG_EFUSE_ACCESS 0x00CF
+
#define REG_BIST_SCAN 0x00D0
#define REG_BIST_RPT 0x00D4
#define REG_BIST_ROM_RPT 0x00D8
@@ -86,6 +88,7 @@
#define REG_CPWM 0x012F
#define REG_FWIMR 0x0130
#define REG_FWISR 0x0134
+#define REG_FTIMR 0x0138
#define REG_PKTBUF_DBG_CTRL 0x0140
#define REG_PKTBUF_DBG_DATA_L 0x0144
#define REG_PKTBUF_DBG_DATA_H 0x0148
@@ -197,6 +200,8 @@
#define REG_POWER_STAGE1 0x04B4
#define REG_POWER_STAGE2 0x04B8
#define REG_PKT_LIFE_TIME 0x04C0
+#define REG_PKT_VO_VI_LIFE_TIME 0x04C0
+#define REG_PKT_BE_BK_LIFE_TIME 0x04C2
#define REG_STBC_SETTING 0x04C4
#define REG_PROT_MODE_CTRL 0x04C8
#define REG_MAX_AGGR_NUM 0x04CA
@@ -233,6 +238,7 @@
#define REG_RD_NAV_NXT 0x0544
#define REG_NAV_PROT_LEN 0x0546
#define REG_BCN_CTRL 0x0550
+#define REG_BCN_CTRL_1 0x0551
#define REG_MBID_NUM 0x0552
#define REG_DUAL_TSF_RST 0x0553
#define REG_BCN_INTERVAL 0x0554
@@ -319,6 +325,8 @@
#define REG_BT_COEX_TABLE 0x06C0
#define REG_WMAC_RESP_TXINFO 0x06D8
+#define REG_USB_Queue_Select_MAC0 0xFE44
+#define REG_USB_Queue_Select_MAC1 0xFE47
/* ----------------------------------------------------- */
/* Redifine 8192C register definition for compatibility */
@@ -355,27 +363,27 @@
#define RRSR_RSC_UPSUBCHNL 0x400000
#define RRSR_RSC_LOWSUBCHNL 0x200000
#define RRSR_SHORT 0x800000
-#define RRSR_1M BIT0
-#define RRSR_2M BIT1
-#define RRSR_5_5M BIT2
-#define RRSR_11M BIT3
-#define RRSR_6M BIT4
-#define RRSR_9M BIT5
-#define RRSR_12M BIT6
-#define RRSR_18M BIT7
-#define RRSR_24M BIT8
-#define RRSR_36M BIT9
-#define RRSR_48M BIT10
-#define RRSR_54M BIT11
-#define RRSR_MCS0 BIT12
-#define RRSR_MCS1 BIT13
-#define RRSR_MCS2 BIT14
-#define RRSR_MCS3 BIT15
-#define RRSR_MCS4 BIT16
-#define RRSR_MCS5 BIT17
-#define RRSR_MCS6 BIT18
-#define RRSR_MCS7 BIT19
-#define BRSR_ACKSHORTPMB BIT23
+#define RRSR_1M BIT(0)
+#define RRSR_2M BIT(1)
+#define RRSR_5_5M BIT(2)
+#define RRSR_11M BIT(3)
+#define RRSR_6M BIT(4)
+#define RRSR_9M BIT(5)
+#define RRSR_12M BIT(6)
+#define RRSR_18M BIT(7)
+#define RRSR_24M BIT(8)
+#define RRSR_36M BIT(9)
+#define RRSR_48M BIT(10)
+#define RRSR_54M BIT(11)
+#define RRSR_MCS0 BIT(12)
+#define RRSR_MCS1 BIT(13)
+#define RRSR_MCS2 BIT(14)
+#define RRSR_MCS3 BIT(15)
+#define RRSR_MCS4 BIT(16)
+#define RRSR_MCS5 BIT(17)
+#define RRSR_MCS6 BIT(18)
+#define RRSR_MCS7 BIT(19)
+#define BRSR_ACKSHORTPMB BIT(23)
/* ----------------------------------------------------- */
/* 8192C Rate Definition */
@@ -600,7 +608,11 @@
#define EEPROM_SVID 0x2C /* SE Vendor ID.E-F */
#define EEPROM_SMID 0x2E /* SE PCI Subsystem ID. 10-11 */
+#define EEPROM_VID_USB 0xC
+#define EEPROM_PID_USB 0xE
+#define EEPROM_ENDPOINT_SETTING 0x10
#define EEPROM_MAC_ADDR 0x16 /* SEMAC Address. 12-17 */
+#define EEPROM_MAC_ADDR_MAC0_92DU 0x19
#define EEPROM_MAC_ADDR_MAC0_92D 0x55
#define EEPROM_MAC_ADDR_MAC1_92D 0x5B
@@ -915,6 +927,42 @@
#define BD_HCI_SEL BIT(26)
#define TYPE_ID BIT(27)
+#define HCI_TXDMA_EN BIT(0)
+#define HCI_RXDMA_EN BIT(1)
+#define TXDMA_EN BIT(2)
+#define RXDMA_EN BIT(3)
+#define PROTOCOL_EN BIT(4)
+#define SCHEDULE_EN BIT(5)
+#define MACTXEN BIT(6)
+#define MACRXEN BIT(7)
+#define ENSWBCN BIT(8)
+#define ENSEC BIT(9)
+
+#define HQSEL_VOQ BIT(0)
+#define HQSEL_VIQ BIT(1)
+#define HQSEL_BEQ BIT(2)
+#define HQSEL_BKQ BIT(3)
+#define HQSEL_MGTQ BIT(4)
+#define HQSEL_HIQ BIT(5)
+
+#define TXDMA_HIQ_MAP GENMASK(15, 14)
+#define TXDMA_MGQ_MAP GENMASK(13, 12)
+#define TXDMA_BKQ_MAP GENMASK(11, 10)
+#define TXDMA_BEQ_MAP GENMASK(9, 8)
+#define TXDMA_VIQ_MAP GENMASK(7, 6)
+#define TXDMA_VOQ_MAP GENMASK(5, 4)
+
+#define QUEUE_LOW 1
+#define QUEUE_NORMAL 2
+#define QUEUE_HIGH 3
+
+#define HPQ_MASK GENMASK(7, 0)
+#define LPQ_MASK GENMASK(15, 8)
+#define PUBQ_MASK GENMASK(23, 16)
+#define LD_RQPN BIT(31)
+
+#define DROP_DATA_EN BIT(9)
+
/* LLT_INIT */
#define _LLT_NO_ACTIVE 0x0
#define _LLT_WRITE_ACCESS 0x1
@@ -929,6 +977,10 @@
/* ----------------------------------------------------- */
/* 0x0400h ~ 0x047Fh Protocol Configuration */
/* ----------------------------------------------------- */
+/* FWHW_TXQ_CTRL */
+#define EN_AMPDU_RTY_NEW BIT(7)
+#define EN_BCNQ_DL BIT(22)
+
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
@@ -942,6 +994,13 @@
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
+/* REG_RD_CTRL */
+#define DIS_EDCA_CNT_DWN BIT(11)
+
+/* REG_BCN_CTRL */
+#define EN_BCN_FUNCTION BIT(3)
+#define DIS_TSF_UDT BIT(4)
+
/* ACMHWCTRL */
#define ACMHW_HWEN BIT(0)
#define ACMHW_BEQEN BIT(1)
@@ -1073,6 +1132,11 @@
#define RCCK0_FACOUNTERLOWER 0xa5c
#define RCCK0_FACOUNTERUPPER 0xa58
+#define RPDP_ANTA 0xb00
+#define RCONFIG_ANTA 0xb68
+#define RCONFIG_ANTB 0xb6c
+#define RPDP_ANTB 0xb70
+
/* 6. PageC(0xC00) */
#define ROFDM0_LSTF 0xc00
@@ -1126,6 +1190,7 @@
#define ROFDM0_TXPSEUDONOISEWGT 0xce4
#define ROFDM0_FRAMESYNC 0xcf0
#define ROFDM0_DFSREPORT 0xcf4
+#define ROFDM0_RXIQEXTANTA 0xca0
#define ROFDM0_TXCOEFF1 0xca4
#define ROFDM0_TXCOEFF2 0xca8
#define ROFDM0_TXCOEFF3 0xcac
@@ -1184,17 +1249,70 @@
#define RTXAGC_B_MCS15_MCS12 0x868
#define RTXAGC_B_CCK11_A_CCK2_11 0x86c
+#define RFPGA0_IQK 0xe28
+#define RTX_IQK_TONE_A 0xe30
+#define RRX_IQK_TONE_A 0xe34
+#define RTX_IQK_PI_A 0xe38
+#define RRX_IQK_PI_A 0xe3c
+
+#define RTX_IQK 0xe40
+#define RRX_IQK 0xe44
+#define RIQK_AGC_PTS 0xe48
+#define RIQK_AGC_RSP 0xe4c
+#define RTX_IQK_TONE_B 0xe50
+#define RRX_IQK_TONE_B 0xe54
+#define RTX_IQK_PI_B 0xe58
+#define RRX_IQK_PI_B 0xe5c
+#define RIQK_AGC_CONT 0xe60
+
+#define RBLUE_TOOTH 0xe6c
+#define RRX_WAIT_CCA 0xe70
+#define RTX_CCK_RFON 0xe74
+#define RTX_CCK_BBON 0xe78
+#define RTX_OFDM_RFON 0xe7c
+#define RTX_OFDM_BBON 0xe80
+#define RTX_TO_RX 0xe84
+#define RTX_TO_TX 0xe88
+#define RRX_CCK 0xe8c
+
+#define RTX_POWER_BEFORE_IQK_A 0xe94
+#define RTX_POWER_AFTER_IQK_A 0xe9c
+
+#define RRX_POWER_BEFORE_IQK_A 0xea0
+#define RRX_POWER_BEFORE_IQK_A_2 0xea4
+#define RRX_POWER_AFTER_IQK_A 0xea8
+#define RRX_POWER_AFTER_IQK_A_2 0xeac
+
+#define RTX_POWER_BEFORE_IQK_B 0xeb4
+#define RTX_POWER_AFTER_IQK_B 0xebc
+
+#define RRX_POWER_BEFORE_IQK_B 0xec0
+#define RRX_POWER_BEFORE_IQK_B_2 0xec4
+#define RRX_POWER_AFTER_IQK_B 0xec8
+#define RRX_POWER_AFTER_IQK_B_2 0xecc
+
+#define MASK_IQK_RESULT 0x03ff0000
+
+#define RRX_OFDM 0xed0
+#define RRX_WAIT_RIFS 0xed4
+#define RRX_TO_RX 0xed8
+#define RSTANDBY 0xedc
+#define RSLEEP 0xee0
+#define RPMPD_ANAEN 0xeec
+
/* RL6052 Register definition */
#define RF_AC 0x00
#define RF_IQADJ_G1 0x01
#define RF_IQADJ_G2 0x02
+#define RF_BS_PA_APSET_G1_G4 0x03
#define RF_POW_TRSW 0x05
#define RF_GAIN_RX 0x06
#define RF_GAIN_TX 0x07
#define RF_TXM_IDAC 0x08
+#define RF_TXPA_AG 0x0B
#define RF_BS_IQGEN 0x0F
#define RF_MODE1 0x10
@@ -979,6 +979,9 @@ int rtl_usb_probe(struct usb_interface *intf,
usb_priv->dev.intf = intf;
usb_priv->dev.udev = udev;
usb_set_intfdata(intf, hw);
+ /* For dual MAC RTL8192DU, which has two interfaces. */
+ rtlpriv->rtlhal.interfaceindex =
+ intf->altsetting[0].desc.bInterfaceNumber;
/* init cfg & intf_ops */
rtlpriv->rtlhal.interface = INTF_USB;
rtlpriv->cfg = rtl_hal_cfg;
@@ -20,6 +20,7 @@
#define MASKBYTE1 0xff00
#define MASKBYTE2 0xff0000
#define MASKBYTE3 0xff000000
+#define MASKH3BYTES 0xffffff00
#define MASKHWORD 0xffff0000
#define MASKLWORD 0x0000ffff
#define MASKDWORD 0xffffffff
@@ -48,6 +49,10 @@
#define MASK20BITS 0xfffff
#define RFREG_OFFSET_MASK 0xfffff
+/* For dual MAC RTL8192DU */
+#define MAC0_ACCESS_PHY1 0x4000
+#define MAC1_ACCESS_PHY0 0x2000
+
#define RF_CHANGE_BY_INIT 0
#define RF_CHANGE_BY_IPS BIT(28)
#define RF_CHANGE_BY_PS BIT(29)
@@ -2768,6 +2773,12 @@ struct rtl_priv {
*/
bool use_new_trx_flow;
+ /* For dual MAC RTL8192DU, things shared by the 2 USB interfaces */
+ u32 *curveindex_2g;
+ u32 *curveindex_5g;
+ struct mutex *mutex_for_power_on_off; /* for power on/off */
+ struct mutex *mutex_for_hw_init; /* for hardware init */
+
#ifdef CONFIG_PM
struct wiphy_wowlan_support wowlan;
#endif
A few of the shared functions need small changes for the USB driver: - firmware loading - efuse reading - rate mask updating - rf register reading - initial gain for scanning Also, add a few macros to wifi.h, add some new members to struct rtl_priv, and initialise rtlhal.interfaceindex for USB devices. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- v5: - No change. v4: - Update the commit message. - Move _rtl92d_pci_lock and _rtl92d_pci_unlock to phy_common.h to silence a checkpatch warning. - Move rate_mask declaration higher (sorted by length). - Add some bit definitions to reg.h. - Add to struct rtl_priv the things shared by the two USB interfaces of a dual MAC RTL8192DU: u32 *curveindex_2g; u32 *curveindex_5g; struct mutex *mutex_for_power_on_off; struct mutex *mutex_for_hw_init; v3: - Silence sparse warnings about locks in phy_common.c by using helper functions _rtl92d_pci_lock() and _rtl92d_pci_unlock(). v2: - Delete the macro IS_NORMAL_CHIP. It wasn't actually used. - Add RTL_USB_DELAY_FACTOR macro. - Use FEN_CPUEN macro. - Make params_pci and params_usb arrays static const, and make rtl_get_hwinfo() take a const pointer. - Put the rate mask, macid, etc. in a struct in rtl92de_update_hal_rate_mask(). - Use sizeof(rtlpriv->rate_mask) in memcpy instead of hardcoded 5. - Rename temp variable to phy_ctrl. - Define _TXDMA_*_MAP and _HPQ, _LPQ, _PUBQ macros using GENMASK and remove the leading underscore. - Delete _NPQ macro because it's not very useful. --- drivers/net/wireless/realtek/rtlwifi/efuse.c | 2 +- drivers/net/wireless/realtek/rtlwifi/efuse.h | 2 +- .../realtek/rtlwifi/rtl8192d/fw_common.c | 23 ++- .../realtek/rtlwifi/rtl8192d/fw_common.h | 10 ++ .../realtek/rtlwifi/rtl8192d/hw_common.c | 53 ++++-- .../realtek/rtlwifi/rtl8192d/phy_common.c | 22 ++- .../realtek/rtlwifi/rtl8192d/phy_common.h | 24 +++ .../wireless/realtek/rtlwifi/rtl8192d/reg.h | 160 +++++++++++++++--- drivers/net/wireless/realtek/rtlwifi/usb.c | 3 + drivers/net/wireless/realtek/rtlwifi/wifi.h | 11 ++ 10 files changed, 266 insertions(+), 44 deletions(-)