@@ -102,7 +102,8 @@ mt76x0_eeprom_param_read(struct seq_file *file, void *data)
u16 val;
int i;
- seq_printf(file, "RF freq offset: %hhx\n", dev->ee->rf_freq_off);
+ seq_printf(file, "RF freq offset: %hhx\n",
+ dev->caldata.freq_offset);
seq_printf(file, "RSSI offset: %hhx %hhx\n",
dev->caldata.rssi_offset[0], dev->caldata.rssi_offset[1]);
seq_printf(file, "Temperature offset: %hhx\n",
@@ -103,23 +103,21 @@ static void mt76x0_set_temp_offset(struct mt76x0_dev *dev)
dev->caldata.temp_offset = -10;
}
-static void
-mt76x0_set_rf_freq_off(struct mt76x0_dev *dev, u8 *eeprom)
+static void mt76x0_set_freq_offset(struct mt76x0_dev *dev)
{
- u8 comp;
+ struct mt76x0_caldata *caldata = &dev->caldata;
+ u8 val;
- comp = eeprom[MT_EE_FREQ_OFFSET_COMPENSATION];
- if (!mt76x02_field_valid(comp))
- comp = 0;
+ val = mt76x02_eeprom_get(&dev->mt76, MT_EE_FREQ_OFFSET);
+ if (!mt76x02_field_valid(val))
+ val = 0;
+ caldata->freq_offset = val;
- dev->ee->rf_freq_off = eeprom[MT_EE_FREQ_OFFSET];
- if (!mt76x02_field_valid(dev->ee->rf_freq_off))
- dev->ee->rf_freq_off = 0;
+ val = mt76x02_eeprom_get(&dev->mt76, MT_EE_TSSI_BOUND4) >> 8;
+ if (!mt76x02_field_valid(val))
+ val = 0;
- if (comp & BIT(7))
- dev->ee->rf_freq_off -= comp & 0x7f;
- else
- dev->ee->rf_freq_off += comp;
+ caldata->freq_offset -= mt76x02_sign_extend(val, 8);
}
void mt76x0_read_rx_gain(struct mt76x0_dev *dev)
@@ -286,7 +284,7 @@ mt76x0_eeprom_init(struct mt76x0_dev *dev)
mt76x02_mac_setaddr(&dev->mt76, eeprom + MT_EE_MAC_ADDR);
mt76x0_set_chip_cap(dev, eeprom);
- mt76x0_set_rf_freq_off(dev, eeprom);
+ mt76x0_set_freq_offset(dev);
mt76x0_set_temp_offset(dev);
dev->chainmask = 0x0101;
@@ -33,11 +33,10 @@ struct mt76x0_caldata {
s8 lna_gain;
s16 temp_offset;
+ u8 freq_offset;
};
struct mt76x0_eeprom_params {
- u8 rf_freq_off;
-
/* TX_PWR_CFG_* values from EEPROM for 20 and 40 Mhz bandwidths. */
u32 tx_pwr_cfg_2g[5][2];
u32 tx_pwr_cfg_5g[5][2];
@@ -942,7 +942,8 @@ mt76x0_rf_init(struct mt76x0_dev *dev)
E1: B0.R22<6:0>: xo_cxo<6:0>
E2: B0.R21<0>: xo_cxo<0>, B0.R22<7:0>: xo_cxo<8:1>
*/
- rf_wr(dev, MT_RF(0, 22), min_t(u8, dev->ee->rf_freq_off, 0xBF));
+ rf_wr(dev, MT_RF(0, 22),
+ min_t(u8, dev->caldata.freq_offset, 0xbf));
val = rf_rr(dev, MT_RF(0, 22));
/*
@@ -74,7 +74,12 @@ enum mt76x02_eeprom_field {
MT_EE_2G_TARGET_POWER = 0x0d0,
MT_EE_TEMP_OFFSET = 0x0d1,
+ MT_EE_TSSI_BOUND1 = 0x0d4,
+ MT_EE_TSSI_BOUND2 = 0x0d6,
+ MT_EE_TSSI_BOUND3 = 0x0d8,
+ MT_EE_TSSI_BOUND4 = 0x0da,
MT_EE_FREQ_OFFSET_COMPENSATION = 0x0db,
+ MT_EE_TSSI_BOUND5 = 0x0dc,
MT_EE_TX_POWER_BYRATE_BASE = 0x0de,
MT_EE_RF_TEMP_COMP_SLOPE_5G = 0x0f2,
Unify frequency offset parsing with mt76x2 driver using eeprom utility routines available in mt76x02-lib module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> --- .../wireless/mediatek/mt76/mt76x0/debugfs.c | 3 ++- .../wireless/mediatek/mt76/mt76x0/eeprom.c | 26 +++++++++---------- .../wireless/mediatek/mt76/mt76x0/eeprom.h | 3 +-- .../net/wireless/mediatek/mt76/mt76x0/phy.c | 3 ++- .../wireless/mediatek/mt76/mt76x02_eeprom.h | 5 ++++ 5 files changed, 22 insertions(+), 18 deletions(-)