| Message ID | 4A884B0D.5000808@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Sunday 16 August 2009 20:08:13 Gábor Stefanik wrote: > The spec for initializing the B2062 radio have changed recently, > update the code to match the changes. > > Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> ack > --- > drivers/net/wireless/b43/phy_lp.c | 5 +++++ > 1 files changed, 5 insertions(+), 0 deletions(-) > > diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c > index 5a7b873..34b7910 100644 > --- a/drivers/net/wireless/b43/phy_lp.c > +++ b/drivers/net/wireless/b43/phy_lp.c > @@ -539,10 +539,15 @@ static void lpphy_2062_init(struct b43_wldev *dev) > b43_radio_write(dev, B2062_N_TX_CTL3, 0); > b43_radio_write(dev, B2062_N_TX_CTL4, 0); > b43_radio_write(dev, B2062_N_TX_CTL5, 0); > + b43_radio_write(dev, B2062_N_TX_CTL6, 0); > b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40); > b43_radio_write(dev, B2062_N_PDN_CTL0, 0); > b43_radio_write(dev, B2062_N_CALIB_TS, 0x10); > b43_radio_write(dev, B2062_N_CALIB_TS, 0); > + if (dev->phy.rev > 0) { > + b43_radio_write(dev, B2062_S_BG_CTL1, > + (b43_radio_read(dev, B2062_N_COMM2) >> 1) | 0x80); > + } > if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) > b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1); > else
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 5a7b873..34b7910 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -539,10 +539,15 @@ static void lpphy_2062_init(struct b43_wldev *dev) b43_radio_write(dev, B2062_N_TX_CTL3, 0); b43_radio_write(dev, B2062_N_TX_CTL4, 0); b43_radio_write(dev, B2062_N_TX_CTL5, 0); + b43_radio_write(dev, B2062_N_TX_CTL6, 0); b43_radio_write(dev, B2062_N_PDN_CTL0, 0x40); b43_radio_write(dev, B2062_N_PDN_CTL0, 0); b43_radio_write(dev, B2062_N_CALIB_TS, 0x10); b43_radio_write(dev, B2062_N_CALIB_TS, 0); + if (dev->phy.rev > 0) { + b43_radio_write(dev, B2062_S_BG_CTL1, + (b43_radio_read(dev, B2062_N_COMM2) >> 1) | 0x80); + } if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) b43_radio_set(dev, B2062_N_TSSI_CTL0, 0x1); else
The spec for initializing the B2062 radio have changed recently, update the code to match the changes. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> --- drivers/net/wireless/b43/phy_lp.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)