diff mbox series

[3/4] wifi: rtl8xxxu: Add LED control code for RTL8192EU

Message ID 5f105f2e-a829-d0b1-92ac-a0ab90511c38@gmail.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series [1/4] wifi: rtl8xxxu: Register the LED and make it blink | expand

Commit Message

Bitterblue Smith Jan. 17, 2023, 10:05 p.m. UTC 
By default the LED will blink when there is some activity.

This was tested with a cheap "HT-WR813" from Aliexpress.

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
 .../realtek/rtl8xxxu/rtl8xxxu_8192e.c         | 24 +++++++++++++++++++
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h |  2 ++
 2 files changed, 26 insertions(+)

Comments

Ping-Ke Shih Jan. 18, 2023, 1:11 a.m. UTC | #1 
> -----Original Message-----
> From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
> Sent: Wednesday, January 18, 2023 6:05 AM
> To: linux-wireless@vger.kernel.org
> Cc: Jes Sorensen <Jes.Sorensen@gmail.com>; Ping-Ke Shih <pkshih@realtek.com>
> Subject: [PATCH 3/4] wifi: rtl8xxxu: Add LED control code for RTL8192EU
> 
> By default the LED will blink when there is some activity.
> 
> This was tested with a cheap "HT-WR813" from Aliexpress.
> 
> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>

Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>

[...]
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
index 4a1c9bcafe31..5cfc00237f42 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -1764,6 +1764,29 @@  static s8 rtl8192e_cck_rssi(struct rtl8xxxu_priv *priv, u8 cck_agc_rpt)
 	return rx_pwr_all;
 }
 
+static int rtl8192eu_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct rtl8xxxu_priv *priv = container_of(led_cdev,
+						  struct rtl8xxxu_priv,
+						  led_cdev);
+	u8 ledcfg = rtl8xxxu_read8(priv, REG_LEDCFG1);
+
+	if (brightness == LED_OFF) {
+		ledcfg &= ~LEDCFG1_HW_LED_CONTROL;
+		ledcfg |= LEDCFG1_LED_DISABLE;
+	} else if (brightness == LED_ON) {
+		ledcfg &= ~(LEDCFG1_HW_LED_CONTROL | LEDCFG1_LED_DISABLE);
+	} else if (brightness == RTL8XXXU_HW_LED_CONTROL) {
+		ledcfg &= ~LEDCFG1_LED_DISABLE;
+		ledcfg |= LEDCFG1_HW_LED_CONTROL;
+	}
+
+	rtl8xxxu_write8(priv, REG_LEDCFG1, ledcfg);
+
+	return 0;
+}
+
 struct rtl8xxxu_fileops rtl8192eu_fops = {
 	.identify_chip = rtl8192eu_identify_chip,
 	.parse_efuse = rtl8192eu_parse_efuse,
@@ -1788,6 +1811,7 @@  struct rtl8xxxu_fileops rtl8192eu_fops = {
 	.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
 	.set_crystal_cap = rtl8723a_set_crystal_cap,
 	.cck_rssi = rtl8192e_cck_rssi,
+	.led_classdev_brightness_set = rtl8192eu_led_brightness_set,
 	.writeN_block_size = 128,
 	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
 	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index d510ce27b1b4..5849fa4e1566 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -147,6 +147,8 @@ 
 #define REG_LEDCFG0			0x004c
 #define  LEDCFG0_DPDT_SELECT		BIT(23)
 #define REG_LEDCFG1			0x004d
+#define  LEDCFG1_HW_LED_CONTROL		BIT(1)
+#define  LEDCFG1_LED_DISABLE		BIT(7)
 #define REG_LEDCFG2			0x004e
 #define  LEDCFG2_HW_LED_CONTROL		BIT(1)
 #define  LEDCFG2_HW_LED_ENABLE		BIT(5)